Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FAN6961SZ by Onsemi is a switching regulator with 15V nominal voltage, PWM control technique, and boost switcher configuration. It is used in automotive applications due to its wide operating temperature range (-40 to 125°C) and small outline package style. The IC features dual terminals, matte tin finish, and gull wing form for surface mount assembly.
Median Price
$0.430
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Rochester
1+ parts
100+ parts
$0.420
1k+ parts
$0.410
10k+ parts
-
Nova Conductors
$0.244
TME
$0.760
$0.340
Chip Stock
Velocity Electronics
Cyclops Electronics Ltd
Digiode
ComSIT Distribution GmbH
Vyrian
Corohmni
$0.239
Continental Prestige Electronics
Argo Parts USA
$0.237
Netroflash
Andel Nordic
$1.666
$1.600
Ampacity Inc.
$4.500
Semicontronic
$7.500
$7.312
$7.275
AZTECH Wire
$12.160
$11.680
$11.440
$11.220
Aztec Data Supply Inc.
$23.060
Problanco Electronics
TANS Electronics
A-Z Elektronik GmbH
Kepictronics
Alle Elektronik GmbH
SupplyDigital Components
Supply Digital
Microchip USA
Authorized Procurement Solutions
Assy Fe
Corphita
UHIMA Technologies
Kulean Microsystems
iodParts Technologies Inc.
The use of plastic/epoxy material ensures durability and reliability.
Surface mount technology allows for easy installation and saves space on the PCB.
Suitable for applications requiring a 15 V supply voltage.
Matte tin finish provides good solderability and conductivity.
Pulse width modulation control technique offers efficient power conversion.
Boost configuration efficiently steps up voltage levels.
Switching Regulators & Controllers FAN6961SZ attributes and parameters. Explore more Switching Regulators & Controllers devices from Onsemi
Other IC type:
Control Technique:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current (Isup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Switcher Config:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
FAN6961SZ Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
ULN2803ADWRG4
Texas Instruments
ULN2803ADWRG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output, and built-in transient protection. It operates b/w -40 to 85 °C with a max supply voltage of 3 V. Ideal for applications requiring sink current flow direction in a small outline package style.
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BAV99
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Air Electro
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;
2N2222A
Semicoa
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Shenzhen Yixinsemi Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (ID): .22 A; Package Shape: RECTANGULAR;
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
LM317T
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
MMBT3904-7-F
Diodes Incorporated
Diodes Inc. MMBT3904-7-F is a NPN BJT transistor for switching applications. Features include VCEsat of 0.3V, hFE of 30, and IC of 0.2A. With a max operating temp of 150°C, it's ideal for small outline SMT designs in automotive electronics.
Nexperia
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
LM2931AZ-5.0RAG
Onsemi
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
LP2950CDT-3.3G
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
Frontier Electronics
MBR1560CT
General Instrument
MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.
TPS62162DSGR
TPS62162DSGR by Texas Instruments is a switching regulator with a max output current of 2.45A and max operating temp of 85°C. Ideal for industrial applications, it offers a min output voltage of 3.3V and operates in hysteric current mode control technique.
MCP16331T-E/CHVAO
Microchip Technology
MCP16331T-E/CHVAO by Microchip is a switching regulator with 6 terminals, operating temp. range of -40 to 125°C, and max output current of 0.8A. Ideal for automotive applications due to AEC-Q100 screening level and compact design with small outline package style. Supports buck switcher config., PWM control technique, and has a max switching frequency of 550kHz.
TPSM53604RDAR
TPSM53604RDAR by Texas Instruments is a 15-terminal switching regulator with a max output current of 4A and a control mode of current-mode PWM. With a wide input voltage range of 3.8V to 36V, it is ideal for automotive applications requiring efficient power conversion up to 7V output voltage.
FAN5331SX
FAN5331SX by Onsemi is a small outline, low profile switching regulator with 5 terminals. It operates b/w -40 to 85°C and supports input voltage range of 2.7-5.5V. With a max output current of 1A and PWM control technique, it's ideal for boost applications in industrial settings.
LMZ22005TZE/NOPB
LMZ22005TZE/NOPB by Texas Instruments is a switching regulator with 5A output current, 950 kHz max switching frequency, and 3.3V nominal output voltage. It is ideal for industrial applications requiring efficient power management in a compact package.
LMZ14201HTZE/NOPB
National Semiconductor
Switching Regulator or Controllers; No. of Terminals: 7; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Position: SINGLE; Terminal Pitch: 1.27 mm;
LM2675MX-3.3/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM5116MHX/NOPB
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 20; Package Code: HTSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TPS82150SILR
TPS82150SILR by Texas Instruments is a voltage-mode switching regulator with a max output current of 1A and a max switching frequency of 2500 kHz. Ideal for automotive applications, it operates in temperatures ranging from -40 to 125°C, making it suitable for various power management needs in compact designs.
LM5116MH/NOPB
LM5145RGYR
LM5145RGYR by Texas Instruments is a voltage-mode switching controller with a max output voltage of 60V and max output current of 30A. With a control technique of pulse width modulation, it operates in automotive applications at temperatures ranging from -40 to 125°C. This chip carrier package with matte tin finish is ideal for buck converter configurations in various electronic systems.
TPS62097RWKR
TPS62097RWKR by Texas Instruments is a switching regulator with 2A output current, 2500kHz max switching frequency, and 3.6V nominal input voltage. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact chip carrier package style.
MC33063ADRJR
MC33063ADRJR by Texas Instruments is a switching regulator with VOLTAGE-MODE control, operating at -40 to 85 °C. It has a max output voltage of 40V and can handle up to 1.5A output current. Ideal for industrial applications requiring efficient buck-boost configurations in compact designs.
LM25011MY/NOPB
LM25011MY/NOPB by Texas Instruments is a switching regulator with a 12V nominal input voltage, 2A max output current, and 2000 kHz max switching frequency. It is ideal for automotive applications due to its -40 to 125 °C operating temperature range and compact square package design.
LM5122MHX/NOPB
LM5122MHX/NOPB by Texas Instruments is a switching controller with a current-mode control technique. It operates in a wide temperature range from -40 to 125°C, making it suitable for automotive applications. With a max output voltage of 100V and a buck-boost switcher configuration, it offers high efficiency and flexibility in power management.
SG3525AN
Linfinity Microelectronics
SWITCHING CONTROLLER; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
TPS62160DGKR
TPS62160DGKR by Texas Instruments is a switching regulator with a 1A output current and 2250 kHz max switching frequency. It operates b/w -40 to 85°C, suitable for industrial applications. With a compact design of 3x3mm, it supports input voltages from 3V to 17V, making it ideal for various power supply designs.
LM2733YMF/NOPB
LM2733YMF/NOPB by Texas Instruments is a switching regulator with 5 terminals, operating temperature range of -40 to 125°C, and output voltage ranging from 3V to 40V. It is ideal for automotive applications due to its compact size, low profile design, and current-mode control technique. With a max output current of 1.5A and switching frequency of up to 1850 kHz, it offers efficient power management in various electronic systems.
LM25011Q1MYX/NOPB
LM25011Q1MYX/NOPB by Texas Instruments is a switching regulator with 10 terminals, operating at -40 to 125°C. It has a max output current of 2A and supports input voltages from 6V to 42V. Ideal for automotive applications, it offers a control mode of current/voltage and a max switching frequency of 2000 kHz.
LMR38020FDDAR
LMR38020FDDAR by Texas Instruments is a switching regulator with 2A output current, 1V min output voltage, and 2200kHz max switching frequency. Ideal for applications requiring efficient power conversion in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FAN6300AMY
Fairchild Semiconductor
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SWITCHING CONTROLLER; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Input Voltage: 25 V;
FAN6920MRMY
SWITCHING CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FAN6961SZ
POWER FACTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FAN6921AMLMY
FAN6921AMRMY
FAN6921MRMY
FAN6100HMMPX
SWITCHING CONTROLLER; JESD-609 Code: e4; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Finish: NICKEL PALLADIUM GOLD SILVER; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1;
SWITCHING CONTROLLER; Terminal Finish: NICKEL PALLADIUM GOLD SILVER; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e4;
FAN65004C
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 35; Package Code: QCCN; Package Shape: SQUARE; Surface Mount: YES;
FAN6100MMPX
SWITCHING CONTROLLER; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1; Terminal Finish: NICKEL PALLADIUM GOLD SILVER; JESD-609 Code: e4;
SWITCHING CONTROLLER; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e4; Terminal Finish: NICKEL PALLADIUM GOLD SILVER;
FAN6204AMX
FAN6204AMX by Onsemi is a small outline switching regulator with 8 terminals and pulse width modulation control. It operates in industrial temperature range (-40 to 105°C) and has peak reflow temperature of 260°C. Ideal for applications requiring efficient power management in compact spaces.
FAN6208MY
SWITCHING CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FAN6961DZ
POWER FACTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved