Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FAN49101AUC340X by Onsemi is a switching regulator with PWM control, operating b/w -40 to 85°C. It has a buck-boost configuration, accepting input voltage from 2.5V to 5.5V. Ideal for industrial applications requiring efficient power management in a compact rectangular package style.
Median Price
$0.766
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$0.736
100+ parts
$0.565
1k+ parts
$0.485
10k+ parts
-
Arrow
$0.795
$0.554
Mouser Electronics
$1.480
$0.650
$0.541
$0.473
Rochester
$0.641
$0.532
$0.474
DigiKey
$0.800
Verical
Digiode
$0.500
Nova Conductors
$0.602
Vyrian
DigiKey Marketplace
$0.570
Cyclops Electronics Ltd
Chip Stock
SPM Sales
Semicontronic
$0.447
$0.436
$0.434
Ampacity Inc.
Corphita
Argo Parts USA
$0.584
Continental Prestige Electronics
$0.590
Netroflash
Advanced Electronics
$1.687
$1.535
$1.383
Aztec Data Supply Inc.
$10.500
Corohmni
$21.482
RC Electronics
Perfect Parts
TANS Electronics
Kulean Microsystems
SupplyDigital Components
Problanco Electronics
Kepictronics
A-Z Elektronik GmbH
Microchip USA
Alle Elektronik GmbH
UHIMA Technologies
Rectangular package shape allows for easy and secure mounting onto circuit boards, making installation and maintenance hassle-free.
With a high maximum operating temperature, this product can withstand extended use in various environmental conditions without compromising performance.
The use of tin, silver, and copper terminal finish ensures excellent conductivity and reliability, enhancing the overall efficiency of the device.
Pulse width modulation control technique provides precise regulation of output voltage, resulting in stable and consistent power delivery to connected devices.
With a low minimum input voltage requirement, this product is suitable for applications where power sources may vary or have limited voltage output.
Switching Regulators & Controllers FAN49101AUC340X attributes and parameters. Explore more Switching Regulators & Controllers devices from Onsemi
Additional Features:
Other IC type:
Control Technique:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Surface Mount:
Switcher Config:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
FAN49101AUC340X Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - FANx/FFGx/FPFx/FSAx/FSUBx/FTLx/FUSBx 06/May/2022 Logo 17/Aug/2017
PCN Assembly/Origin - Second Source 27/Apr/2021
PCN Packaging - Mult Devices 24/Oct/2017
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
M39029/56-351
Glenair
CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
2N2222A
Onsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
1N4148
Semitronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Comchip Technology
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
Bharat Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
IRLML6401TRPBF
Infineon Technologies
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
BAT54C-7-F
Diodes Incorporated
BAT54C-7-F by Diodes Inc. is a Schottky rectifier diode with common cathode, 2 elements, and max forward voltage of 0.24V. Ideal for applications requiring fast reverse recovery time of 0.005 us, such as in small outline packages for surface mount technology at temperatures ranging from -65 to 150°C.
LM317T/NOPB
Texas Instruments
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
LM358N
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
DRV5053VAQLPG
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
SS14
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
BAV99
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FDV304P
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
LM5163QDDARQ1
LM5163QDDARQ1 by Texas Instruments is a switching regulator with a max output current of 0.5A and max output voltage of 90V, ideal for automotive applications due to its AEC-Q100 screening level. It operates in temperatures ranging from -40°C to 150°C, making it suitable for harsh environments. The package style is small outline with low profile, perfect for space-constrained designs.
LM2671MX-5.0/NOPB
LM2671MX-5.0/NOPB by Texas Instruments is a switching regulator with a max output current of 0.5A and a nominal output voltage of 5V. It operates in voltage-mode control, suitable for automotive applications with an input voltage range from 6.5V to 40V and a wide temperature grade of -40°C to 125°C.
LM2671M-ADJ/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM2672M-5.0/NOPB
MCP16301T-I/CHY
Microchip Technology
MCP16301T-I/CHY by Microchip: Switching Regulator, 85°C max temp, 2-15V output range. Ideal for industrial applications requiring current-mode control with a 550 kHz switching frequency and 0.6A output current. Small outline package with low profile and shrink pitch design for space-constrained setups.
LM5155DSSR
LM5155DSSR by Texas Instruments is a switching regulator with a max output voltage of 300V and min input voltage of 1.5V, suitable for automotive applications. It operates in current-mode control with a max switching frequency of 2200kHz, making it ideal for compact designs requiring efficient power management. The package style is small outline with very thin profile, offering space-saving benefits for electronic devices.
LMZ23603TZX/NOPB
Switching Regulator or Controllers; No. of Terminals: 7; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Maximum Output Current: 3 A; Peak Reflow Temperature (C): 245;
LM2596SX-3.3/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: TO-263; Package Shape: RECTANGULAR; Surface Mount: YES;
LM2675N-5.0/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
TPS5410DRG4
TPS5410DRG4 by Texas Instruments is a voltage-mode switching regulator with a max output current of 1A and a max input voltage of 36V. It operates in the automotive temperature grade range (-40 to 125°C) and uses pulse width modulation control technique. This small outline package (4.9mm x 3.9mm) is ideal for applications requiring efficient power conversion in tight spaces.
LM5118MH/NOPB
LM5118MH/NOPB by Texas Instruments is a switching regulator with 20 terminals, operating temperature range of -40 to 125°C, and output voltage up to 70V. Ideal for automotive applications, it features current-mode control, PWM technique, and buck-boost configuration for efficient power management in compact designs.
LM25011AQ1MY/NOPB
LM25011AQ1MY/NOPB by Texas Instruments is a switching regulator with a 12V nominal input voltage, 2A max output current, and 2000 kHz max switching frequency. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and small outline package style.
LMZ23605TZE/NOPB
Switching Regulator or Controllers; No. of Terminals: 7; Surface Mount: YES; Moisture Sensitivity Level (MSL): 3; Control Mode: CURRENT-MODE; Package Body Material: PLASTIC/EPOXY;
TPS54240DGQR
TPS54240DGQR by Texas Instruments is a switching regulator with 2.5A output current and 2500 kHz switching frequency. It operates b/w -40 to 125 °C, suitable for automotive applications. With a compact design of 3x3 mm, it supports buck configuration and pulse width modulation control mode.
LT8608EMSE#PBF
Linear Technology
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 10; Package Code: HTSSOP; Package Shape: SQUARE; Surface Mount: YES;
LMR36506R5RPER
LMR36506R5RPER by Texas Instruments is a switching regulator with a nominal input voltage of 24V and output voltage of 5V. It operates in current-mode control technique with a max output current of 0.6A, making it suitable for automotive applications requiring efficient power management in compact spaces. With a wide temperature range from -40°C to 150°C and high switching frequency of 2200 kHz, this chip carrier package offers reliable performance in demanding environments.
LM3578AMX/NOPB
LM3578AMX/NOPB by Texas Instruments is a switching regulator with 0-1V output voltage range, 2-40V input voltage range, and 100kHz max switching frequency. Ideal for applications requiring current-mode control technique in small outline packages.
LT1616ES6#TRPBF
Analog Devices
LT1616ES6#TRPBF by Analog Devices is a small outline switching regulator with 6 terminals, operating at 0-70°C. It features a buck switcher configuration, pulse width modulation control technique, and can handle up to 0.85A output current. Ideal for applications requiring efficient power conversion in compact spaces.
LM5022MMX/NOPB
Switching Regulator or Controllers; No. of Terminals: 10; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Peak Reflow Temperature (C): 260;
TPS54040DGQ
TPS54040DGQ by Texas Instruments is a switching regulator with a max output current of 0.5A and a control mode of current-mode PWM. It operates in automotive-grade temperatures, making it suitable for various applications requiring precise voltage regulation in tight spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FAN4860UMP5X
FAN4860UMP5X by Onsemi is a current-mode boost switching regulator with max output current of 1.32A and max switching frequency of 3MHz. Ideal for industrial applications, it operates b/w -40 to 85°C, has a nominal input voltage of 3.6V, and a nominal output voltage of 5.05V.
Fairchild Semiconductor
POWER FACTOR CONTROLLER WITH POST REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: HVSON; Package Shape: SQUARE; Surface Mount: YES;
FAN4860UC5X
POWER FACTOR CONTROLLER WITH POST REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: VFBGA; Package Shape: RECTANGULAR; Surface Mount: YES;
FAN49100AUC330X
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 20; Package Code: VFBGA; Package Shape: RECTANGULAR; Surface Mount: YES;
FAN48610UC50X
FAN48610UC50X by Onsemi is a current-mode switching regulator with boost configuration. It operates b/w -40 to 85°C, has a max output current of 1A, and supports input voltages from 2.5V to 4.5V. Ideal for industrial applications requiring a compact grid array package with very thin profile and fine pitch design.
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 9; Package Code: VFBGA; Package Shape: SQUARE; Surface Mount: YES;
FAN48610BUC33X
FAN4860UC33X
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: VFBGA; Package Shape: RECTANGULAR; Surface Mount: YES;
FAN48630UC35X
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: VFBGA; Package Shape: SQUARE; Surface Mount: YES;
FAN4800AUM
POWER FACTOR CONTROLLER WITH POST REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FAN4800AUN
POWER FACTOR CONTROLLER WITH POST REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
FAN48630BUC315X
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved