Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CAT5111ZI-10-T3 by Onsemi is a Digital Potentiometer with 10000 ohm total resistance, 300 ppm/°C temp coefficient, and 20% resistance tolerance. It operates b/w -40 to 85 °C and has a CMOS technology with INCREMENT/DECREMENT control interface. Ideal for industrial applications requiring precise resistance adjustments in compact spaces.
Median Price
$5.570
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Chip1Stop
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Digiode
$5.292
Chip Stock
Vyrian
Native Components
$0.059
$0.057
Corphita
$5.013
AZTECH Wire
$5.760
$5.530
$5.420
$5.310
Corohmni
$26.197
Advanced Electronics
$26.703
$24.300
$21.896
Component Stockers USA
$99.990
SupplyDigital Components
Kulean Microsystems
Problanco Electronics
Northwest PG Solutions
TANS Electronics
UHIMA Technologies
Microchip USA
GreenTree Electronics
Perfect Parts
The use of plastic/epoxy material makes this product lightweight and durable, making it ideal for various applications.
Being surface mountable allows for easy and quick integration onto PCBs, saving space and simplifying assembly.
With a low temperature coefficient of 300 ppm/°C, this digital potentiometer provides stable and accurate resistance values over a wide temperature range.
The INCREMENT/DECREMENT control interface enables precise adjustment of resistance values, offering flexibility in various applications.
With a nominal total resistance of 10000 ohm, this digital potentiometer can be used in a wide range of circuit designs requiring different resistance values.
The maximum resistor terminal voltage of 3 V ensures safe operation within specified limits, protecting the digital potentiometer from overvoltage.
Compatibility with both 3V and 5V power supplies allows for versatile compatibility with different circuit configurations.
The high maximum operating temperature of 85 °C enables reliable performance in various industrial environments where temperature may fluctuate.
The matte tin terminal finish provides good solderability and conductivity, ensuring secure connections for reliable performance.
The CMOS technology used in this digital potentiometer offers low power consumption and high noise immunity, making it an energy-efficient and reliable choice for electronic circuits.
Digital Potentiometers (DigiPOT) CAT5111ZI-10-T3 attributes and parameters. Explore more Digital Potentiometers (DigiPOT) devices from Onsemi
Technology:
Sub-Category:
Resistance Law:
Nominal Total Resistance:
Control Interface:
No. of Functions:
Maximum Resistance Tolerance:
Additional Features:
Nominal Supply Voltage:
Minimum Resistor Terminal Voltage:
Maximum Resistor Terminal Voltage:
Minimum Operating Temperature:
Maximum Operating Temperature:
Temperature Grade:
Nominal Temperature Coefficient:
Peak Reflow Temperature:
Maximum Time At Peak Reflow Temperature:
Moisture Sensitivity Level (MSL):
Terminal Form:
Terminal Position:
No. of Terminals:
Terminal Finish:
Terminal Pitch:
No. of Positions:
Maximum Seated Height:
Width:
Length:
Package Shape:
Package Body Material:
Package Style:
Package Code:
Package Equivalence Code:
Qualified:
JESD-30 Code:
JESD-609 Code:
CAT5111ZI-10-T3 Converters trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Mult Dev EOL 08/Jul/2021
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
LM317T
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
2N2222A
Digitron Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
BAV99
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LP2950CDT-3.3G
Onsemi
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
CRG0805F10K
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
DRV5053VAQLPG
Texas Instruments
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
1554216004
Molex
WIRE AND CABLE;
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
Vishay Telefunken
1N4148
Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
Excel (Suzhou) Semiconductor
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
MMBF170LT1G
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
MCP4161T-103E/MS
MCP4161T-103E/MS by Microchip is a 10000 ohm digital potentiometer with linear resistance law. It operates at -40 to 125 °C, has 129 positions, and uses INCREMENT/DECREMENT control interface. Ideal for automotive applications due to its small size, low power consumption (1 mA), and wide temperature range.
DS1804Z-010/T&R
Maxim Integrated
DS1804Z-010/T&R by Maxim Integrated is a digital potentiometer with 10000 ohm total resistance, 750 ppm/°C temperature coefficient, and 5.5 V max terminal voltage. It is used in industrial applications for precise increment/decrement control of resistance values in circuits.
MCP40D19T-503E/LT
MCP40D19T-503E/LT by Microchip Technology is a digital potentiometer with a nominal total resistance of 50k ohm and a max resistor terminal voltage of 5.5V. It is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.
AD5272BCPZ-20-RL7
Analog Devices
AD5272BCPZ-20-RL7 by Analog Devices is a 2-WIRE SERIAL digital potentiometer with 20000 ohm total resistance, 1024 positions, and 5 ppm/°C temp coefficient. Ideal for automotive applications due to its -40 to 125 °C operating range and compact square package style.
TPL0102-100PWR
TPL0102-100PWR by Texas Instruments is a 2-WIRE SERIAL digital potentiometer with 100000 ohm resistance, 256 positions, and 130 ppm/°C temp coefficient. Ideal for industrial applications requiring precise resistance adjustments in a compact package.
MCP4451-502E/ML
MCP4451-502E/ML by Microchip is a 4-function Digital Potentiometer with 100kΩ total resistance, 2-wire serial control interface, and 150 ppm/°C temperature coefficient. It is used in automotive applications due to its TS16949 screening level, -40°C to 125°C operating temperature range, and compact chip carrier package style.
MAX5422ETA+T
DIGITAL POTENTIOMETER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE;
MCP42100-I/P
MCP42100-I/P by Microchip is a 100k ohm digital potentiometer with 3-wire serial control interface. It operates at -40 to 85°C, has 256 positions, and consumes max 0.6mA supply current. Ideal for industrial applications requiring precise resistance adjustments in compact designs.
X9C104SZ
Intersil
DIGITAL POTENTIOMETER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
MAX5479EUD+T
MAX5479EUD+T by Analog Devices is a 2-WIRE SERIAL digital potentiometer with 100k ohm total resistance, linear resistance law, and 70 ppm/°C temperature coefficient. Ideal for industrial applications requiring precise resistance adjustments in a compact package.
MCP4451-103E/ST
MCP4451-103E/ST by Microchip is a 2-WIRE SERIAL Digital Potentiometer with 100k ohm resistance, 4 functions, and 150 ppm/°C temperature coefficient. Ideal for automotive applications, it operates b/w -40 to 125 °C with a max supply current of 0.6 mA.
AD8402ARUZ100-REEL
AD8402ARUZ100-REEL by Analog Devices is a 3-wire serial controlled digital potentiometer with 100k ohm total resistance and linear resistance law. It operates b/w -40 to 125 °C, suitable for automotive applications. The device has 256 positions, operates at 3V supply voltage, and features a small outline package with dual terminal position.
MCP4231-103E/P
MCP4231-103E/P by Microchip is a 10k ohm digital potentiometer with linear resistance law. It operates at -40 to 125 °C and has a bandwidth of 1 kHz. Ideal for automotive applications, it features an increment/decrement control interface and operates on 1.8/5 V supplies.
AD8402ARZ10-REEL
AD8402ARZ10-REEL by Analog Devices is a 3-WIRE SERIAL Digital Potentiometer with 10000 ohm total resistance, suitable for automotive applications. It has 256 positions, operates at -40 to 125 °C, and offers a bandwidth of 0.6 kHz. The package style is small outline with dual terminal position and matte tin finish.
X9313WSZ-3T1
Renesas Electronics
X9313WSZ-3T1 by Renesas Electronics is a digital potentiometer with 10000 ohm resistance, 32 positions, and 20% resistance tolerance. It operates b/w 0 to 70 °C and has a max voltage of 5.5 V. Ideal for applications requiring precise resistance adjustments in compact electronic devices.
MCP4132-103E/MS
MCP4132-103E/MS by Microchip is a 10000 ohm digital potentiometer with linear resistance law. It operates at -40 to 125 °C, has 129 positions, and uses INCREMENT/DECREMENT control interface. Ideal for automotive applications due to its small size, low power consumption (1 mA), and wide temperature range.
AD5222BRZ50
AD5222BRZ50 by Analog Devices is a 50000 ohm linear digital potentiometer with -35 ppm/°C temp coefficient. It has 128 positions, operates at -40 to 85 °C, and uses INCREMENT/DECREMENT control interface. Ideal for industrial applications requiring precise resistance adjustments in compact designs.
MCP41100-E/P
MCP41100-E/P by Microchip is a 100k ohm digital potentiometer with 3-wire serial interface. It operates at -40 to 125 °C and has a resistance tolerance of 20%. Ideal for automotive applications, it offers a bandwidth of 0.145 kHz and requires only 0.6 mA supply current.
DS1804Z-010/GG8
DIGITAL POTENTIOMETER; Terminal Form: GULL WING; No. of Terminals: 8; Package Shape: RECTANGULAR; Maximum Resistor Terminal Voltage: 6 V; Nominal Total Resistance: 10000 ohm;
MCP4561-503E/MS
MCP4561-503E/MS by Microchip is a digital potentiometer with 50k ohm resistance, 257 positions, and 150 ppm/°C temp coefficient. It's used in automotive applications for increment/decrement control interface and operates at -40 to 125 °C temperature range.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CAT5120SDI-10GT3
CAT5120SDI-10GT3 by Onsemi is a digital potentiometer with 10000 ohm resistance, 200 ppm/°C temp coefficient, and 5.5 V max terminal voltage. It's ideal for industrial applications requiring precise increment/decrement control in a compact package with dual terminals and nickel palladium gold finish.
CAT5120SDI-10-GT3
Catalyst Semiconductor
CAT5120SDI-10-GT3 by Catalyst Semiconductor is a 10000 ohm linear digital potentiometer with INCREMENT/DECREMENT control interface. It operates at -40 to 85 °C, has 16 positions, and uses NICKEL PALLADIUM GOLD finish. Ideal for industrial applications requiring precise resistance adjustments in compact spaces.
CAT5113VI-00-GT3
CAT5113VI-00-GT3 by Onsemi is a Digital Potentiometer with 100k ohm resistance, 300 ppm/°C temp coefficient, and 20% resistance tolerance. It is used in industrial applications for precise control of voltage levels through its INCREMENT/DECREMENT interface.
DIGITAL POTENTIOMETER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
CAT5121SDI-10GT3
DIGITAL POTENTIOMETER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
CAT5121SDI-10-GT3
CAT5113VI-01-GT3
CAT5171TBI-50GT3
CAT5171TBI-50GT3 by Onsemi is a 2-WIRE SERIAL digital potentiometer with 50000 ohm total resistance, 256 positions, and 100 ppm/°C temperature coefficient. Ideal for industrial applications requiring precise resistance adjustments in compact designs.
CAT5119SDI-00GT3
CAT5119SDI-00GT3 by Onsemi is a Digital Potentiometer with 100k ohm resistance, 200 ppm/°C temp coefficient, and 5.5V max terminal voltage. It's used in industrial applications for precise control of resistance values through an increment/decrement interface.
CAT5119SDI-00-GT3
CAT5113LI-01-G
DIGITAL POTENTIOMETER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
CAT5113LI-01-G by Onsemi is a Digital Potentiometer with 1000 ohm resistance, 300 ppm/°C temp coefficient, and 20% resistance tolerance. It operates at -40 to 85 °C, suitable for industrial applications requiring precise resistance adjustments in a compact package.
CAT5172TBI-00GT3
CAT5172TBI-00GT3 by Onsemi is a 3-WIRE SERIAL digital potentiometer with 100000 ohm total resistance, 256 positions, and 100 ppm/°C temperature coefficient. Ideal for industrial applications requiring precise resistance adjustments in compact spaces.
CAT5110SDI-00GT3
CAT5110SDI-00-GT3
CAT5110SDI-00-GT3 by Catalyst Semiconductor is a Digital Potentiometer with 100k ohm resistance, 32 positions, and 200 ppm/°C temp coefficient. It is used in industrial applications for increment/decrement control interface, with a max operating temp of 85 °C and dual terminal position.
CAT5113VI-10-GT3
CAT5113VI-10-GT3 by Onsemi is a Digital Potentiometer with 10000 ohm resistance, 300 ppm/°C temp coefficient, and 20% tolerance. Ideal for industrial applications due to its linear resistance law, INCREMENT/DECREMENT control interface, and small outline package style.
CAT5138SDI-10GT3
CAT5113ZI-50-T3
DIGITAL POTENTIOMETER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: RECTANGULAR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved