Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
HALF BRIDGE BASED MOSFET DRIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE;
Median Price
$0.385
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Arrow
1+ parts
$0.265
100+ parts
-
1k+ parts
10k+ parts
Mouser Electronics
$0.650
$0.396
$0.340
$0.311
Farnell
$0.286
Rochester
$0.319
$0.285
Chip1Stop
$0.411
$0.333
Element14
$0.511
$0.492
$0.437
Verical
Nova Conductors
$0.297
Digiode
$0.300
Chip Stock
VNN
Vyrian
Cyclops Electronics Ltd
Bristol Electronics
ACDS - Activité Composants Distribution Service
Dan-Mar Components
Prism Electronics
Semicontronic
$0.243
$0.237
$0.236
Ampacity Inc.
Corphita
$0.284
Corohmni
Argo Parts USA
$0.292
$0.283
Netroflash
$0.282
$0.276
Advanced Electronics
$0.338
Continental Prestige Electronics
$0.842
$0.494
$0.312
$0.245
Microchip USA
$1.747
Parana Technologies
$5.092
$4.735
IDEA Electronic Components Group
$5.475
$5.201
DigiPath Technology Company
$8.541
$8.199
Aztec Data Supply Inc.
$14.590
Perfect Parts
RC Electronics
$0.280
$0.270
Lixinc
Problanco Electronics
SupplyDigital Components
Kepictronics
TANS Electronics
Assy Fe
A-Z Elektronik GmbH
iodParts Technologies Inc.
Alle Elektronik GmbH
Futuretech Components
Kulean Microsystems
Authorized Procurement Solutions
GreenTree Electronics
UHIMA Technologies
MOSFET Gate Drivers ADP3110AKCPZ-RL attributes and parameters. Explore more MOSFET Gate Drivers devices from Onsemi
High Side Driver:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Turn-off Time:
Turn-on Time:
Width:
ADP3110AKCPZ-RL Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - Lead Finish/BOM Update 10/Jul/2015
PCN Part Number - ADI to ON Semi 19/Dec/2007
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
BAV99W-7-F
Diodes Incorporated
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
LAN8720A-CP-TR
Microchip Technology
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
BAV99
Nexperia
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
TM4C1294NCPDTI3
Texas Instruments
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
NE555D
Philips Semiconductors
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM358N
Kec
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148
Semitronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Rectron
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
1N4148W-T
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR0520LT1
Motorola
M24308/2-1F
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
1N4148WT
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Jinan Jingheng Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDV304P
Onsemi
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
ULN2003ADR
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
SMBJ18CA
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
LL4148
First Components International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LTC7001HMSE#PBF
Linear Technology
BUFFER OR INVERTER BASED MOSFET DRIVER; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: HTSSOP; Package Shape: SQUARE; Technology: CMOS;
LTC7003HMSE#PBF
Analog Devices
LTC7003HMSE#PBF by Analog Devices is a MOSFET Gate Driver with 16 terminals, suitable for high side driver applications. It operates at supply voltages ranging from 3.5V to 60V and features a turn-on/off time of 0.07 us. This small outline package with a rectangular shape and gull wing terminal form is ideal for compact designs requiring fast switching speeds.
LM5109MA/NOPB
National Semiconductor
HALF BRIDGE BASED MOSFET DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
IXDD604SIATR
IXYS Corporation
BUFFER OR INVERTER BASED MOSFET DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
ISL6144IRZA
Renesas Electronics
ISL6144IRZA by Renesas Electronics is a MOSFET gate driver with a max supply voltage of 75V and turn-off time of 0.3us. It is designed for industrial applications, featuring a package style of chip carrier with very thin profile and matte tin terminal finish. The high side driver operates in temperatures ranging from -40 to 105°C, making it suitable for various industrial automation systems.
LTC7000EMSE#PBF
LTC7000EMSE#PBF by Analog Devices is a MOSFET gate driver with max supply voltage of 135V, min supply voltage of 3.5V, and turn-on/off time of 0.07us. It is used in high side driver applications requiring a compact design and operates b/w -40 to 125°C temperature range.
IR2130PBF
Infineon Technologies
IR2130PBF by Infineon Technologies is a MOSFET gate driver with a max supply voltage of 620V and power supplies of 15V. With a turn-on time of 0.85us and turn-off time of 0.55us, it's ideal for automotive applications requiring high side drivers in a compact rectangular package style.
NCD5703BDR2G
NCD5703BDR2G by Onsemi is a MOSFET gate driver with 8 terminals, suitable for automotive applications. It operates b/w -40 to 125°C and has a turn-on/off time of 0.075 us. With a supply voltage range of 13.2V to 30V, it features an interface IC type of BUFFER OR INVERTER BASED IGBT DRIVER.
LTC4440ES6-5#TRPBF
LTC4440ES6-5#TRPBF by Analog Devices is a MOSFET gate driver with 6 terminals and CMOS technology. It operates b/w -40 to 85°C, with supply voltage ranging from 4 to 15 V. With a turn-on/off time of 0.065 us, it's ideal for industrial applications requiring precise control over MOSFET switching.
TC4468EPD
Teledyne Components
AND GATE BASED MOSFET DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Shape: RECTANGULAR; Input Characteristics: SCHMITT TRIGGER;
TC4428COA
BUFFER OR INVERTER BASED MOSFET DRIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1EDN7550BXTSA1
1EDN7550BXTSA1 by Infineon is a MOSFET Gate Driver with 6 terminals, operating voltage range of 4.5-20V, and high side driver feature. It has a small outline package style, turn-on/off time of 0.055 us, and nominal output peak current limit of 8A. Ideal for applications requiring fast switching speeds in compact designs like power supplies and motor control systems.
1EDN7512BXTSA1
1EDN7512BXTSA1 by Infineon: MOSFET Gate Driver with 20V max supply, 4.5V min supply, 0.025us turn-on/off time. Ideal for buffer or inverter-based applications due to small outline and low profile design.
ADUM3220ARZ
ADUM3220ARZ by Analog Devices is a MOSFET Gate Driver with 5.5V max supply voltage, 18V protection, and 0.23A output current. Ideal for automotive applications due to its thermal protection, small outline package, and fast turn-on/off times of 0.072us.
IR2102SPBF
IR2102SPBF by Infineon Technologies is a MOSFET gate driver with a max supply voltage of 20V. It is a small outline package with 8 terminals and can operate in temperatures ranging from -40°C to 125°C. This driver is commonly used in automotive applications due to its high side driver capability and CMOS technology.
UCC27211ADRMT
UCC27211ADRMT by Texas Instruments is a MOSFET gate driver with 2 channels, 4A max output current, and 17V max supply voltage. Ideal for automotive applications due to its high side driver feature and -40 to 140°C operating temperature range. Package style: small outline, heat sink/slug, very thin profile.
IR2130SPBF
IR2130SPBF by Infineon Technologies is a MOSFET gate driver with a max supply voltage of 620V and power supplies of 15V. It features a small outline package style, dual terminal position, and matte tin terminal finish. Ideal for automotive applications due to its high side driver technology and peak reflow temperature of 260°C.
IR2125PBF
International Rectifier
BUFFER OR INVERTER BASED MOSFET DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
UCC37322DGN
UCC37322DGN by Texas Instruments is a MOSFET gate driver with a max supply voltage of 15V and output current of 9A. It features a small outline package, totem-pole output characteristics, and BICMOS technology. Ideal for commercial applications requiring fast turn-on/off times in a compact design.
FAN73832MX
FAN73832MX by Onsemi is a MOSFET gate driver with 20V max supply voltage, 15V power supplies, and -40 to 125°C operating temperature range. It features under voltage protection, push-pull output characteristics, and dual terminal position. Ideal for automotive applications requiring a compact small outline package with gull wing terminals.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADP3110AKCPZ-RL
ADP3110AKCPZ-RL by Analog Devices is a MOSFET gate driver with 8 terminals, operating voltage range of 4.15V to 13.2V, and interface IC type as half bridge based. It is suitable for applications requiring high side drivers in compact spaces due to its small package size and low profile design.
ADP3650JCPZ-RL
AND GATE BASED MOSFET DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE;
ADP3120AJCPZ-RL
ADP3110AKRZ-RL
HALF BRIDGE BASED MOSFET DRIVER; Temperature Grade: OTHER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
ADP3110AKRZ
ADP3120AJRZ-RL
ADP3419JRMZ-REEL
HALF BRIDGE BASED MOSFET DRIVER; Temperature Grade: OTHER; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE;
ADP3419JRMZ-REEL by Analog Devices is a MOSFET gate driver with a 5V power supply, 26V max supply voltage, and operating temperature range of 0 to 100°C. It features a small outline package style suitable for surface mount applications. Ideal for half bridge based MOSFET driver interfaces in various electronic systems.
ADP3118JRZ-RL
ADP3110KRZ
ADP3110KRZ by Analog Devices is a MOSFET Gate Driver with 12V power supply, 13.2V max voltage, and operates b/w 0-85°C. It features a half bridge based interface IC type for high side driving applications in commercial extended temperature grade environments.
ADP3120JCPZ-RL
ADP3120AJRZ
ADP3110KRZ-RL
ADP3110KRZ-RL by Analog Devices is a MOSFET Gate Driver with 8 terminals, operating voltage range of 4.15V to 13.2V, and temperature range of 0°C to 85°C. It features a small outline package style suitable for high side driver applications in commercial extended temperature grade environments.
ADP3120JRZ-RL
ADP3120JRZ
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved