Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Maximum Forward Current: .02 A; Maximum On State Current: .06 A; Maximum Operating Temperature: 85 Cel; Maximum Isolation Voltage: 2500 V;
Median Price
$0.742
Lifecycle Status
Suppliers In-Stock
76
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.840
100+ parts
$0.421
1k+ parts
$0.319
10k+ parts
$0.284
Element14
$1.310
$0.792
$0.758
-
Rochester
$0.728
$0.605
$0.539
DigiKey
$0.910
Verical
$0.756
$0.674
EBV Elektronik
Master Electronics
$0.505
$0.429
$0.352
Arrow
$0.413
$0.301
$0.268
Chip1Stop
$0.364
Freelance Electronics
$0.204
Ozdisan Elektronik
$0.253
TEDSS.com
$0.350
$0.290
Digiode
$0.542
Component Electronics Inc.
$0.770
$0.580
$0.500
Nova Conductors
$0.795
TME
$0.800
$0.455
$0.408
Forefront Electronics and Design
$1.960
American Microsemiconductor Inc.
$9.000
Chip Stock
Rutronik
$0.459
$0.416
$0.402
Vyrian
NAC Semi
$1.570
$1.430
ComSIT USA
ComSIT Distribution GmbH
Goldney Electronics S.L.
IBS Electronics
$0.905
$0.358
Cyclops Electronics Ltd
Rebound Electronics
Electronic Expediters
Mentor Electronics Marketing, LLC
Holdelec - ElecDif-Pro
Ashlea Components Ltd
LIBRA Elektronik GmbH
Lakeland Logistics Inc
Bristol Electronics
M&R Communications
Lakeview Electronics
MRC Electronics
R&J Components
Fibra_Brandt Electronic GMBH
Prism Electronics
Dan-Mar Components
Lantek
ECAB
Zilex Electronics Inc.
SPM Sales
A2Z Electronics, Inc.
MISTER SPROCKETS
Atlantic Semiconductor
Jameco Electronics
Euro-Tech
EMSNET
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
J & M Industries LLC
First Choice Components Inc.
Whistler Technology
Inland Empire Components Inc.
Resion
PC Components Company LLC
Electronics Depot
PAR Electronics
Huijzer Components
Corel Iberica Componentes, S.L.
Manoshevitz Elec. Sales
Sea View Technologies
ZD Integrated Circuits Inc.
GES GmbH
Electro Mavin
Microfarads
Halfin
Mil-Aero Solutions, Inc.
ACDS - Activité Composants Distribution Service
ICP Electronique
LittleDiode
Sogenti Electronics
North Shore Components
Semicontronic
$0.246
$0.240
$0.239
Decca Corp
$0.241
Parana Technologies
$0.376
$1.575
DigiPath Technology Company
$0.414
$0.380
ChromeModa Solutions
$0.422
$0.346
IDEA Electronic Components Group
Corphita
$0.513
Component Stockers USA
$0.620
$0.530
Aranea Global
$0.779
$0.748
Continental Prestige Electronics
Argo Parts USA
Modulus Dynamics
$1.331
$1.278
$1.225
Corohmni
Advanced Electronics
$1.371
$1.302
Metaverse IC Inc.
Kepictronics
QUARKTWIN TECHNOLOGY LTD
Perfect Parts
GreenTree Electronics
TANS Electronics
Glotronic Ltd.
Infinite Electronics LLP (Excess)
Eastek
Assy Fe
SupplyDigital Components
Kulean Microsystems
Problanco Electronics
Supply Digital
UHIMA Technologies
Authorized Procurement Solutions
ChipstoGo Electronic ltd
RTC Component Inc.
Cyclops Electronics Ltd (Excess)
Speed Components Ltd (Excess)
A-Plus Industry Inc.
Optocoupler Circuit Outputs 6N138 attributes and parameters. Explore more Optocoupler Circuit Outputs devices from Onsemi
Additional Features:
Configuration:
Maximum Forward Current:
Maximum Isolation Voltage:
Mounting Feature:
No. of Elements:
No. of Functions:
Maximum On State Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Packing Method:
6N138 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
NSN
4470-01-035-8148, 4470010358148, 5980-01-014-9653, 5980010149653
NIIN
010358148, 010149653
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
STM32H743BIT6
STMicroelectronics
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
1N4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
2N2222A
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
LL4148
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148W-T
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MC7805CTG
Onsemi
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
MBRS140T3G
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
2N7002
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
BSS138
Vishay Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR; Transistor Application: SWITCHING;
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
LM2675M-ADJ/NOPB
Texas Instruments
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
BAV99
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
NC7WZ17P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
M39029/58-360
Itt Cannon
CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);
Philips Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
TLP118(TPL,E(T
Toshiba
TLP118(TPL,E(T by Toshiba is a single optocoupler circuit output with a max forward current of 0.025 A. It is commonly used in logic IC output applications due to its fast nominal response time of 30 ns and high max isolation voltage of 3750 V.
HCPL-0531-500E
Broadcom
Broadcom's HCPL-0531-500E is a 2-channel logic IC output optocoupler with separate configuration. It offers a min current transfer ratio of 19% and max isolation voltage of 3750V. Ideal for applications requiring surface mounting feature, it operates b/w -55 to 100°C with a data rate of 1 MBps.
HCPL2530
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); No. of Functions: 2; Additional Features: UL RECOGNIZED; Configuration: SEPARATE, 2 CHANNELS;
6N136
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum On State Current: .008 A; Configuration: SINGLE; Nominal Data Rate: 1 MBps;
OPI1268
Tt Electronics Plc
OPI1268 by Tt Electronics Plc is a single optocoupler with a max forward current of 0.05A and an isolation voltage of 16kV. It operates b/w -40°C to 100°C, making it suitable for logic IC output applications at data rates up to 2MBps. This rectangular-shaped component has through-hole mounting and can handle a max on-state current of 0.025A.
6N137
Isocom Components
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: TIN; Maximum Operating Temperature: 85 Cel; Maximum Power Dissipation: .085 W; Maximum Isolation Voltage: 5000 V;
TLP250H(D4,F)
LOGIC IC OUTPUT OPTOCOUPLER;
6N137M
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Supply Voltage: 4.5 V; Minimum Operating Temperature: -40 Cel; No. of Elements: 1;
6N136V
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: TIN; Maximum On State Current: .008 A; JESD-609 Code: e3; Maximum Isolation Voltage: 5000 V;
HCPL-0601-000E
Agilent Technologies
Optocoupler - IC Outputs; Mounting Feature: SURFACE MOUNT; Nominal Supply Voltage: 5.5 V; Maximum Forward Current: .02 A; Maximum Isolation Voltage: 3750 V; Minimum Operating Temperature: -40 Cel;
HCPL-0701
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1; JESD-609 Code: e0; Maximum Operating Temperature: 70 Cel; Maximum Isolation Voltage: 3750 V;
6N137S-TA
Lite-on Technology
Lite-on Technology's 6N137S-TA is a single optocoupler with max. forward current of 0.02 A and isolation voltage of 5000 V. Ideal for logic IC output applications, it operates b/w -40 to 85 °C with a response time of 21 ns, making it suitable for high-speed data transmission at 15 MBps.
HCPL0630
Fairchild Semiconductor's HCPL0630 is a 2-channel optocoupler with separate configuration. It has a max forward current of 0.1A and operates at temperatures ranging from -40 to 85°C. Ideal for logic IC output applications, it offers an isolation voltage of 3750V and data rate of 10MBps.
PC457L0NIP0F
Sharp Corporation
Sharp Corporation's PC457L0NIP0F is a single optocoupler with max forward current of 0.016A and isolation voltage of 3750V. Ideal for logic IC output applications, it operates b/w 0-70°C with a data rate of 1MBps and max on-state current of 0.008A.
OPT101P
Burr-Brown Corporation
LINEAR IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Shape: SQUARE; No. of Functions: 1; Maximum Operating Temperature: 70 Cel;
5962-8947701PA
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb) - hot dipped; Maximum Forward Current: .015 A; Nominal Response Time: 10000 ns; No. of Functions: 1;
6N136M
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Forward Current: .025 A; Minimum Operating Temperature: -40 Cel; Maximum On State Current: .008 A;
6N135
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: 0 Cel; Maximum Power Dissipation: .1 W; Maximum Forward Voltage: 1.7 V;
HCPL-2231-300E
Optocoupler - IC Outputs; Mounting Feature: SURFACE MOUNT; Maximum Forward Current: .02 A; No. of Elements: 2; Maximum Isolation Voltage: 3750 V; Nominal Response Time: 300 ns;
HCPL-0731-000E
Broadcom's HCPL-0731-000E optocoupler features 2 separate channels, 0.02A max forward current, and 300% min current transfer ratio. Ideal for logic IC output applications with a max isolation voltage of 3750V and surface mounting feature.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); No. of Functions: 1; Minimum Operating Temperature: 0 Cel; JESD-609 Code: e0; Configuration: COMPLEX;
Optek Technology
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: 0 Cel; JESD-609 Code: e0; Configuration: SINGLE; Maximum Forward Current: .02 A;
Renesas Electronics
Optocoupler - IC Outputs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .02 A; Nominal Response Time: 50 ns; Minimum Operating Temperature: 0 Cel;
Telefunken Microelectronics
Optocoupler - IC Outputs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .02 A; Maximum Isolation Voltage: 2500 V; Nominal Response Time: 50 ns;
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Supply Voltage: 4.5 V; No. of Elements: 1; No. of Functions: 1;
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn) - annealed; JESD-609 Code: e3; No. of Elements: 1; Nominal Data Rate: 10 MBps; Configuration: SINGLE;
Quality Technologies
LOGIC IC OUTPUT OPTOCOUPLER; Nominal Data Rate: 10 MBps; Maximum Forward Current: .02 A; Maximum Isolation Voltage: 2500 V; No. of Elements: 1; No. of Functions: 1;
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Additional Features: CMOS COMPATIBLE, UL APPROVED, CAN ALSO OPERATE ON 5V; Maximum Isolation Voltage: 5000 V; Configuration: SINGLE; Nominal Data Rate: 15 MBps;
Vishay Intertechnology
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Nominal Data Rate: 10 MBps; No. of Elements: 1; Maximum Forward Current: .015 A;
Morrihan International
Optocoupler - IC Outputs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Supply Voltage: 5 V; JESD-609 Code: e0; No. of Elements: 1;
Qt Optoelectronics
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1; Additional Features: UL RECOGNIZED; Maximum On State Current: .05 A; Maximum Forward Current: .05 A;
Isocom
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Minimum Operating Temperature: -40 Cel; No. of Elements: 1; Nominal Data Rate: 10 MBps; Minimum Supply Voltage: 4.5 V;
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Minimum Supply Voltage: 4.5 V; Minimum Operating Temperature: -40 Cel; Nominal Data Rate: 10 MBps; Maximum Forward Current: .05 A;
Aborn Electronics
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: TIN; Additional Features: UL APPROVED; Maximum Isolation Voltage: 5000 V; JESD-609 Code: e3;
6N137 by Texas Instruments is a logic IC output optocoupler with max. forward current of 0.02A and isolation voltage of 3000V. It operates b/w 0-70°C, ideal for complex circuit outputs requiring high hysteresis ratio (0.0167) and on-state current up to 0.05A.
Nec Electronics America
LOGIC IC OUTPUT OPTOCOUPLER; Minimum Operating Temperature: 0 Cel; Maximum Operating Temperature: 70 Cel; No. of Functions: 1; Maximum On State Current: .05 A; No. of Elements: 1;
Marktech Optoelectronics
Optocoupler - IC Outputs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .02 A; Maximum Power Dissipation: .085 W; Maximum Operating Temperature: 70 Cel;
General Instrument Optoelectronics
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: TIN; Minimum Supply Voltage: 4.5 V; Maximum Operating Temperature: 85 Cel; Packing Method: TUBE;
Hewlett Packard
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .02 A; JESD-609 Code: e0; Nominal Data Rate: 10 MBps; Minimum Operating Temperature: -40 Cel;
Rs Components
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: TIN; No. of Elements: 1; Minimum Supply Voltage: 4.5 V; Maximum Operating Temperature: 85 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved