Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Omron V-10G2-1B4-K is a SPDT snap acting/limit switch with 300000 cycles electrical life. It has a max AC contact current of 10A@250VAC and operates b/w -25 to 80 °C. Ideal for panel mounting applications, it features a hinge lever actuator with 5.6mm travel and 0.59N max operating force.
Median Price
$8.240
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
< 1k
Mouser Electronics
1+ parts
$8.060
100+ parts
$5.890
1k+ parts
-
10k+ parts
DigiKey
$8.200
$5.891
RS Americas
$8.280
$6.210
RS (Exports)
$10.120
$7.190
TodayComponents
$2.870
$2.750
Allen Electronics Distributors
$11.550
$9.240
Long electrical life ensures durability and reliability, making this product a good choice for long-term use.
Compact body width allows for easy installation in various applications.
Single-Pole Double-Throw switch function provides versatility in usage.
Low body height allows for flexible installation in limited space environments.
High maximum operating temperature range ensures reliable performance in various conditions.
High AC contact current rating allows for handling of high current applications.
Low minimum operating temperature range ensures the product can be used in cold environments.
Sufficient actuator travel distance for effective operation.
Hinge lever actuator type provides precise and reliable switching action.
High DC contact voltage rating allows for handling of higher voltage DC applications.
Snap acting/limit switch type provides quick and accurate switching action.
High AC load rating ensures compatibility with a wide range of AC applications.
Compact body length/diameter allows for easy integration into various systems.
Low operating force requirement for efficient operation.
Low DC load rating ensures compatibility with lower voltage DC applications.
Low DC contact current rating for handling lower current DC applications.
Momentary switch action for specific applications requiring temporary contact.
Screw termination type for secure and reliable electrical connections.
High AC contact voltage rating for handling higher voltage AC applications.
Limited pre-travel distance ensures prompt switching action.
Panel mount feature for easy and convenient installation on various surfaces.
Snap Action & Limit Switches V-10G2-1B4-K attributes and parameters. Explore more Snap Action & Limit Switches devices from Omron
Actuator Travel (mm):
Type (Actuator):
Body Width:
Body Height:
Body Length/Diameter:
AC Maximum Rating R Load (Contact):
Maximum AC Contact Current:
Maximum DC Contact Current:
DC Maximum Rating R Load (Contact):
Maximum AC Contact Voltage:
Maximum DC Contact Voltage:
Electrical Life:
Manufacturer Series:
Mounting Feature:
Maximum Operating Force:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Pre Travel:
Switch Action:
Switch Function:
Switch Type:
Termination Type:
V-10G2-1B4-K Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.70.00
SB
As a global leader in the field of automation, OMRON’s business fields cover a broad spectrum, ranging from industrial automation and electronic components to social systems including automated ticket gates and solar power conditioners, healthcare. At present, OMRON provides products and services in around 120 countries and regions.
LM555CM
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
BAV99
Infineon Technologies
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
FDV303N
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
LM317T/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-609 Code: e3; Package Shape: RECTANGULAR;
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
2N2222A
Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WT
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883C
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
M39029/58-360
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
Philips Semiconductors
1N4148
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
SS14
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Non Repetitive Peak Forward Current: 40 A; Technology: SCHOTTKY; No. of Elements: 1;
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
9HM1
Honeywell Sensing And Control
9HM1 by Honeywell Sensing And Control is a Snap Action & Limit Switch with SPDT switch function. It features a body width of 6.35 inch, hermetically sealed for corrosion proof sealing, and operates b/w -184 to 121 °C. Ideal for panel mounting applications, it has a max DC contact voltage of 28V and max operating force of 1.95N.
D413-R1RA-G2
The Cherry
The Cherry's D413-R1RA-G2 is a SPDT snap action/limit switch with 50000 cycles electrical life. Featuring brass terminals, it has a max AC contact current of 0.1A and DC contact current of 0.5A at 30VDC. Ideal for applications requiring precise actuation within -40°C to +250VAC environments.
311SM6-T2
SNAP ACTING/LIMIT SWITCH; Manufacturer Series: SM;
1172CX12
1172CX12 by Honeywell Sensing And Control is a SNAP ACTING/LIMIT SWITCH with SPDT switch function. It has a max AC contact current of 1A@125VAC and sealing for EPOXY TERMINAL SEALED; EXPLOSION PROOF applications. This panel mount switch has dimensions of 101.6mm x 104mm x 101.6 inch, making it suitable for various industrial uses.
SS-5GL2-FD
Omron
Omron SS-5GL2-FD is a SPDT snap action/limit switch with 200000 cycles electrical life. Featuring HINGE ROLLER LEVER actuator type, it has IP40 sealing and operates b/w -25°C to 85°C. Ideal for applications requiring momentary switch action with 5A@125VAC AC max rating and 5A@14VDC DC max rating.
DB2CA1RC
Zf Friedrichshafen Ag
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): ROLLER LEVER; Body Width: 6.45 inch; Additional Features: ELECTRICAL LIFE AND ELECTRICAL RATING FOR EN ALSO AVAILABLE;
411SM1
411SM1 by Honeywell Sensing And Control is a Snap Action & Limit Switch with SPDT switch function. It features a body width of 6.35 inch and corrosion-proof sealing, suitable for panel mounting applications. With a max operating temperature of 121°C and AC contact current rating of 5A@250VAC, it offers reliable performance in various industrial settings.
JE-5
JE-5 by Honeywell Sensing And Control is a SNAP ACTING/LIMIT SWITCH with 3.81mm ROLLER TYPE actuator travel and 3.34N max operating force. It features MOMENTARY switch action, WIRE termination type, and PANEL mounting feature. Ideal for applications requiring precise control in industrial machinery and equipment.
D2F-01
Omron's D2F-01 snap action switch has a 30,000 cycle electrical life and operates b/w -25°C to 65°C. With a SPDT switch function, it features a PIN PLUNGER actuator type with 0.75mm travel. Ideal for applications requiring momentary switch action in environments up to IP40 sealing standard.
11SX21-T
11SX21-T by Honeywell Sensing And Control is a Snap Action & Limit Switch with SPDT switch function. It features PHENOLIC housing, SILVER terminal material, and PLASTIC PLUNGER actuator type. Ideal for applications requiring momentary switch action, with max AC contact current of 5A@115VAC and operating temperature range from 121 to 204 °C.
D3V-165-1C5
Omron's D3V-165-1C5 snap action/limit switch has a 100000 cycle electrical life, SPDT switch function, and 2.4mm actuator travel. With a max operating temperature of 105°C, it is ideal for panel mounting applications requiring a reliable 16A@250VAC contact rating.
SS-5GLD
Omron SS-5GLD is a SPDT snap action/limit switch with 2A@250VAC AC rating, 200000 cycles electrical life, and IP40 sealing. It features HINGE LEVER actuator type for applications requiring momentary switch action in temperatures ranging from -25 to 85 °C.
Z-15GQ
Omron Z-15GQ is a SPDT snap action/limit switch with 500000 cycles electrical life. It has a max AC contact current of 15A@250VAC and DC contact current of 15A@14VDC. With a plunger actuator type, it is ideal for panel mounting applications requiring momentary switch action.
311SM6-H58
P6-24003
Otto Engineering
P6-24003 by Otto Engineering is a snap action/limit switch with a DPDT switch function. It has an environmentally sealed body and can withstand temperatures from -55 to 85 °C. With a max operating force of 53.38 N, it is ideal for panel mount-threaded applications requiring momentary switch action.
SS-5GL111-F
SNAP ACTING/LIMIT SWITCH;
V7-1C17D8-294
Honeywell V7-1C17D8-294 is a 10.2" snap action switch with SPDT function, suitable for panel mounting applications. It operates b/w -40 to 82°C, handling up to 15A at 250VAC. Featuring a simulated roller lever actuator with 4.8mm travel and 0.89N max force, it offers momentary switch action with quick connect termination.
TFCJL3SP004AC
C & K Components
TFCJL3SP004AC by C & K Components is a SPDT snap acting/limit switch with 300000 cycle electrical life. Featuring a thermoplastic housing, copper alloy terminals, and silver end contact plating, it operates b/w -40 to 85 °C. Ideal for panel mounting applications requiring a max AC contact current of 20A@250VAC.
SS-5GLT
Omron SS-5GLT is a SPDT snap action/limit switch with 200000 cycles electrical life. Featuring HINGE LEVER actuator, it has IP40 sealing and operates b/w -25 to 85°C. Ideal for panel mounting applications, it offers 5A@125VAC AC max rating and 0.49N max operating force.
EXD-AR-3
The Honeywell Sensing And Control EXD-AR-3 is an explosion-proof snap acting/limit switch with DPDT switch function. It has a max AC contact current of 10A@250VAC and a max DC contact current of 0.3A@125VDC. Ideal for panel mounting applications, it features a roller lever actuator type with 6.35mm actuator travel.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
V-10G3-1C25-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): LONG HINGE LEVER; Maximum Pre Travel: 9 mm; Body Height: 15.9 mm;
V-10G-1C24-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Maximum Pre Travel: 1.2 mm; Manufacturer Series: V;
V-10G-1C4-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Body Height: 15.9 mm; Termination Type: QUICK CONNECT;
V-10G1-1B4-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SHORT HINGE LEVER; Maximum Pre Travel: 1.5 mm; Body Length/Diameter: 27.8 mm;
V-10G-1A4-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Maximum AC Contact Current: 10 A; Body Height: 15.9 mm;
V-10G-1B5-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Minimum Operating Temperature: -25 Cel; Maximum Operating Force: 1.96 N;
V-10G1-1E4-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SHORT HINGE LEVER; Maximum DC Contact Voltage: 125 V; Maximum Operating Force: .98 N;
V-10G-1E4-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Maximum Operating Force: .98 N; Maximum Pre Travel: 1.2 mm;
V-10G1-1A4-T
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SHORT HINGE LEVER; DC Maximum Rating R Load (Contact): 10A@8VDC; Body Length/Diameter: 27.8 mm;
V-10G-1A4-T
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Maximum Operating Temperature: 150 Cel; Maximum DC Contact Current: 10 A;
V-10G1-1B5-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SHORT HINGE LEVER; Termination Type: SCREW; Maximum AC Contact Voltage: 250 V;
V-10G-1A4-T-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Maximum AC Contact Current: 10 A; Maximum Operating Force: .98 N;
V-10G1-1C25-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SHORT HINGE LEVER; Body Height: 15.9 mm; Body Width: 10.3 inch;
V-10G-1C25-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Maximum Operating Temperature: 80 Cel; Body Width: 10.3 inch;
V-10G1-1A5-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SHORT HINGE LEVER; Actuator Travel (mm): 2.5; Body Length/Diameter: 27.8 mm;
V-10G-1A5-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Electrical Life: 300000 Cycle(s); DC Maximum Rating R Load (Contact): 10A@8VDC;
V-10G1-1E5-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SHORT HINGE LEVER; Maximum DC Contact Current: .1 A; Maximum Pre Travel: 1.5 mm;
V-10G1-1A4-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SHORT HINGE LEVER; Minimum Operating Temperature: -25 Cel; Electrical Life: 300000 Cycle(s);
V-10G1-1A4-T-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SHORT HINGE LEVER; Body Height: 15.9 mm; Maximum Operating Temperature: 150 Cel;
V-10G1-1C24-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SHORT HINGE LEVER; Maximum AC Contact Voltage: 250 V; DC Maximum Rating R Load (Contact): 10A@8VDC;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved