Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LINEAR POSITION SENSOR,PHOTOELECTRIC,RETROREFLECTIVE; Mounting Feature: PANEL MOUNT; Output Type: NPN; Package Shape or Style: RECTANGULAR; Maximum Measurement Range (mm): 1000 mm; Body Height: 40 mm;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Native Components
1+ parts
$0.911
100+ parts
1k+ parts
10k+ parts
Northwest PG Solutions
$1.002
AZTECH Wire
$17.140
Component Stockers USA
$4,012.440
Kepictronics
Linear Position Sensors E3S-R66 attributes and parameters. Explore more Linear Position Sensors devices from Omron
Additional Features:
Body Width:
Body Height:
Body Length/Diameter:
Housing:
Maximum Measurement Range (mm):
Minimum Measurement Range (mm):
Mounting Feature:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Circuit Type:
Output Type:
Package Shape or Style:
Response Time:
Sensors or Transducers Type:
Maximum Supply Voltage:
Minimum Supply Voltage:
Termination Type:
As a global leader in the field of automation, OMRON’s business fields cover a broad spectrum, ranging from industrial automation and electronic components to social systems including automated ticket gates and solar power conditioners, healthcare. At present, OMRON provides products and services in around 120 countries and regions.
BAV99
Infineon Technologies
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
2N7002
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
FT232RL-REEL
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
SS14
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Vishay Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR; Transistor Application: SWITCHING;
Itt Semiconductor
2N7002,215
NXP Semiconductors
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
1N4148WS
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
2N2222A
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
1N4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
IRLML6402TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
LM317LMX/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
MBRA340T3G
Onsemi
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
E3F1-DN22
Omron
LINEAR POSITION SENSOR,PHOTOELECTRIC,DIFFUSE; Output Type: NPN; Package Shape or Style: CYLINDRICAL; Termination Type: CONNECTOR; Housing: ABS; Minimum Supply Voltage: 10 V;
OPB732WZ
Optek Technology
LINEAR POSITION SENSOR,PHOTOELECTRIC,DIFFUSE; Mounting Feature: BOARD MOUNT; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 0.25mA; Body Height: 12.7 mm;
SFH9201-3/4
LINEAR POSITION SENSOR,PHOTOELECTRIC,DIFFUSE; Mounting Feature: SURFACE MOUNT; Output Type: NPN; Package Shape or Style: RECTANGULAR; Body Length/Diameter: 4 mm; Body Width: 3.2 inch;
SS41-T3
Honeywell Sensing And Control
LINEAR POSITION SENSOR, HALL EFFECT;
E3F2-R2RB412M
LINEAR POSITION SENSOR,PHOTOELECTRIC,RETROREFLECTIVE; Output Type: PNP; Package Shape or Style: CYLINDRICAL; Maximum Operating Temperature: 55 Cel; Body Height: 64.9 mm; Minimum Supply Voltage: 10 V;
E3RA-DP22-F2
LINEAR POSITION SENSOR,PHOTOELECTRIC,DIFFUSE; Mounting Feature: BOARD MOUNT; Output Type: PNP; Package Shape or Style: CYLINDRICAL; Output Circuit Type: Open Collector; Response Time: 500 us;
SPI302-02
SPI302-02 by Onsemi is a Linear Position Sensor with VCEsat of 0.6V, Output Voltage of 20V, and Operating Current of 50mA. Ideal for applications requiring precise gap sensing in environments ranging from -25 °C to 75°C.
OHDK10P5101/S35A
Baumer Electric Ag
Baumer Electric Ag's linear position sensor OHDK10P5101/S35A has a 30V max supply voltage, 10.4" body width, and 27mm body height. Ideal for applications requiring precise analog current output over a measurement range of 22-130mm with quick response time of 250us. Suitable for board mounting in various industrial settings.
IPS2200BI1R
Renesas Electronics
Renesas Electronics IPS2200BI1R is a linear position sensor with 3-3.6V supply voltage range, -40 to 125°C operating temperature, and -2-2mA analog current output. Ideal for applications requiring inductive sensors like automotive systems, industrial automation, and robotics due to its compact size and I2C/SPI interface.
SFH9240-Z
Osram Opto Semiconductors
Linear Position Sensors; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 100 Cel; JESD-609 Code: e3; Maximum Operating Current: 50 mA; No. of Channels: 1;
02560407-000
TE Connectivity's 02560407-000 is a linear position sensor with a max supply voltage of 3V. It has a linearity of 0.25% and operates in temperatures ranging from -55°C to 150°C. This stainless steel sensor, with a cylindrical shape and wire termination, is commonly used for measuring linear positions with an excitation frequency of 20 kHz.
SI7201-B-10-IV
Silicon Labs
LINEAR POSITION SENSOR, HALL EFFECT; JESD-609 Code: e3; Terminal Finish: Matte Tin (Sn);
E3T-FD11ML2M
LINEAR POSITION SENSOR,PHOTOELECTRIC,DIFFUSE; Mounting Feature: BOARD/PANEL MOUNT; Output Type: NPN; Package Shape or Style: RECTANGULAR; Minimum Supply Voltage: 10.8 V; Minimum Operating Temperature: -25 Cel;
OPB704
LINEAR POSITION SENSOR,PHOTOELECTRIC,DIFFUSE; Mounting Feature: PANEL MOUNT; Output Type: NPN; Package Shape or Style: RECTANGULAR; Output Range: 0.20mA; Minimum Operating Temperature: -40 Cel;
E3FA-VN21
Omron's E3FA-VN21 is a NPN linear position sensor with diffuse photoelectric technology. Housed in plastic, it has a measurement range of 10-50mm. Ideal for applications requiring precise distance sensing in industrial automation settings.
SI7210-B-00-IVR
LINEAR POSITION SENSOR, HALL EFFECT; Operating Frequency: 400 Hz;
E3F3-T31M
LINEAR POSITION SENSOR,PHOTOELECTRIC,THROUGH BEAM;
GP2Y3A002K0F
Sharp Corporation
Sharp Corporation's GP2Y3A002K0F is a linear position sensor with 4.5-5.5V supply voltage range, 2-2.60V analog output, and 1500mm measurement range. Ideal for panel mounting applications, this photoelectric sensor operates b/w -10 to 60°C temperatures and measures 20"x18mm in size.
HOA1405-001
HOA1405-001 by Honeywell is a linear position sensor with max VCEsat of 0.4V, response time of 15us, and max output voltage of 30V. Ideal for applications requiring precise position sensing in environments ranging from -40°C to 85°C.
EE-SY193
LINEAR POSITION SENSOR,PHOTOELECTRIC,DIFFUSE; Mounting Feature: SURFACE MOUNT; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 0.001-0.001mA; Maximum Operating Temperature: 80 Cel;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
E3S-R112M
LINEAR POSITION SENSOR,PHOTOELECTRIC,RETROREFLECTIVE; Mounting Feature: PANEL MOUNT; Output Type: NPN; Package Shape or Style: RECTANGULAR; Termination Type: WIRE; Maximum Supply Voltage: 30 V;
E3S-R122M
LINEAR POSITION SENSOR,PHOTOELECTRIC,RETROREFLECTIVE; Mounting Feature: PANEL MOUNT; Output Type: NPN; Package Shape or Style: RECTANGULAR; Maximum Operating Temperature: 40 Cel; Minimum Operating Temperature: 0 Cel;
E3S-R16
LINEAR POSITION SENSOR,PHOTOELECTRIC,RETROREFLECTIVE; Mounting Feature: PANEL MOUNT; Output Type: NPN; Package Shape or Style: RECTANGULAR; Maximum Measurement Range (mm): 1000 mm; Housing: PLASTIC;
E3S-R17
LINEAR POSITION SENSOR,PHOTOELECTRIC,RETROREFLECTIVE; Mounting Feature: PANEL MOUNT; Output Type: NPN; Package Shape or Style: RECTANGULAR; Termination Type: CONNECTOR; Additional Features: IP67, MUTUAL INTERFERENCE PREVENTION, REVERSE POLARITY PROTECTION, SHORT CIRCUIT PROTECTION;
E3S-R1E422M
LINEAR POSITION SENSOR,PHOTOELECTRIC,RETROREFLECTIVE; Mounting Feature: PANEL MOUNT; Output Type: NPN; Package Shape or Style: RECTANGULAR; Termination Type: WIRE; Additional Features: IP67, MUTUAL INTERFERENCE PREVENTION, REVERSE POLARITY PROTECTION, SHORT CIRCUIT PROTECTION;
E3S-R1E42M
LINEAR POSITION SENSOR,PHOTOELECTRIC,RETROREFLECTIVE; Mounting Feature: PANEL MOUNT; Output Type: NPN; Package Shape or Style: RECTANGULAR; Minimum Supply Voltage: 10.8 V; Body Length/Diameter: 70 mm;
E3S-R2E4
LINEAR POSITION SENSOR,PHOTOELECTRIC,RETROREFLECTIVE;
E3S-R2E41
E3S-R312M
LINEAR POSITION SENSOR,PHOTOELECTRIC,RETROREFLECTIVE; Mounting Feature: PANEL MOUNT; Output Type: PNP; Package Shape or Style: RECTANGULAR; Body Length/Diameter: 42.3 mm; Maximum Supply Voltage: 30 V;
E3S-R36
LINEAR POSITION SENSOR,PHOTOELECTRIC,RETROREFLECTIVE; Mounting Feature: PANEL MOUNT; Output Type: PNP; Package Shape or Style: RECTANGULAR; Termination Type: CONNECTOR; Body Length/Diameter: 42.3 mm;
E3S-R612M
LINEAR POSITION SENSOR,PHOTOELECTRIC,RETROREFLECTIVE; Mounting Feature: PANEL MOUNT; Output Type: NPN; Package Shape or Style: RECTANGULAR; Body Height: 40 mm; Output Circuit Type: Open Collector;
E3S-R622M
LINEAR POSITION SENSOR,PHOTOELECTRIC,RETROREFLECTIVE; Mounting Feature: PANEL MOUNT; Output Type: NPN; Package Shape or Style: RECTANGULAR; Maximum Supply Voltage: 30 V; Maximum Measurement Range (mm): 300 mm;
E3S-R67
LINEAR POSITION SENSOR,PHOTOELECTRIC,RETROREFLECTIVE; Mounting Feature: PANEL MOUNT; Output Type: NPN; Package Shape or Style: RECTANGULAR; Body Height: 40 mm; Minimum Supply Voltage: 10 V;
E3S-R812M
LINEAR POSITION SENSOR,PHOTOELECTRIC,RETROREFLECTIVE; Mounting Feature: PANEL MOUNT; Output Type: PNP; Package Shape or Style: RECTANGULAR; Minimum Supply Voltage: 10 V; Termination Type: WIRE;
E3S-R86
LINEAR POSITION SENSOR,PHOTOELECTRIC,RETROREFLECTIVE; Mounting Feature: PANEL MOUNT; Output Type: PNP; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Response Time: 1000 us;
E3S-RS30E422M
LINEAR POSITION SENSOR,PHOTOELECTRIC,RETROREFLECTIVE; Mounting Feature: PANEL MOUNT; Output Type: NPN; Package Shape or Style: RECTANGULAR; Body Width: 20 inch; Response Time: 1000 us;
E3S-RS30E42M
LINEAR POSITION SENSOR,PHOTOELECTRIC,RETROREFLECTIVE; Mounting Feature: PANEL MOUNT; Output Type: NPN; Package Shape or Style: RECTANGULAR; Termination Type: WIRE; Maximum Operating Temperature: 55 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved