Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LINEAR POSITION SENSOR,PHOTOELECTRIC,RETROREFLECTIVE; Mounting Feature: PANEL MOUNT; Output Type: NPN; Package Shape or Style: RECTANGULAR; Minimum Supply Voltage: 10.8 V; Body Length/Diameter: 70 mm;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Native Components
1+ parts
$1.609
100+ parts
1k+ parts
10k+ parts
Northwest PG Solutions
$1.770
Linear Position Sensors E3S-R1E42M attributes and parameters. Explore more Linear Position Sensors devices from Omron
Additional Features:
Body Width:
Body Height:
Body Length/Diameter:
Housing:
Maximum Measurement Range (mm):
Minimum Measurement Range (mm):
Mounting Feature:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Type:
Package Shape or Style:
Response Time:
Sensors or Transducers Type:
Maximum Supply Voltage:
Minimum Supply Voltage:
Termination Type:
As a global leader in the field of automation, OMRON’s business fields cover a broad spectrum, ranging from industrial automation and electronic components to social systems including automated ticket gates and solar power conditioners, healthcare. At present, OMRON provides products and services in around 120 countries and regions.
BAV99W-7-F
Diodes Incorporated
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
SMBJ18CA
Sensitron Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
FDLL4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
M24308/2-1F
Esterline Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;
NDT2955
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
MMBT3904-7-F
Diodes Inc. MMBT3904-7-F is a NPN BJT transistor for switching applications. Features include VCEsat of 0.3V, hFE of 30, and IC of 0.2A. With a max operating temp of 150°C, it's ideal for small outline SMT designs in automotive electronics.
LM317LMX/NOPB
Texas Instruments
LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.
EU2B-YS3103F
Idec
ROTARY SWITCH;
ULN2803ADWRG4
ULN2803ADWRG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output, and built-in transient protection. It operates b/w -40 to 85 °C with a max supply voltage of 3 V. Ideal for applications requiring sink current flow direction in a small outline package style.
SS14
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Jinan Jingheng Electronics
Synsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Changzhou Galaxy Century Microelectronics
ISL29501IRZ-T7
Renesas Electronics
LINEAR POSITION SENSOR,PHOTOELECTRIC,TOF,VCSEL; Terminal Finish: MATTE TIN; JESD-609 Code: e3;
E3F3-R62
Omron
LINEAR POSITION SENSOR,PHOTOELECTRIC,RETROREFLECTIVE;
E3S-DBN32T
LINEAR POSITION SENSOR,PHOTOELECTRIC,RETROREFLECTIVE; Mounting Feature: BOARD MOUNT; Output Type: NPN; Package Shape or Style: RECTANGULAR; Maximum Measurement Range (mm): 500 mm; Termination Type: CONNECTOR;
E3S-AD88
LINEAR POSITION SENSOR,PHOTOELECTRIC,DIFFUSE; Mounting Feature: BOARD MOUNT; Output Type: PNP; Package Shape or Style: RECTANGULAR; Maximum Measurement Range (mm): 100 mm; Minimum Supply Voltage: 10 V;
SI7210-B-04-IVR
Silicon Labs
LINEAR POSITION SENSOR, HALL EFFECT; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3; Operating Frequency: 400 Hz;
EY3A-112
LINEAR POSITION SENSOR,PHOTOELECTRIC,THROUGH BEAM; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 0.60-3.50V; Minimum Operating Temperature: 0 Cel; Termination Type: CONNECTOR;
PM-L65
Panasonic
The Panasonic PM-L65 is a linear position sensor with 5-24V supply voltage range. Featuring through-beam photoelectric sensors, it offers fast response time of 80us and high repeatability of 0.01. Ideal for applications requiring precise position detection in temperatures ranging from -25 to 55°C.
E3FB-VP21
LINEAR POSITION SENSOR,PHOTOELECTRIC,DIFFUSE; Output Type: PNP; Package Shape or Style: CYLINDRICAL; Additional Features: IP67, IP69K; Housing: NICKEL PLATED BRASS; Termination Type: CONNECTOR;
TLP907(Y,F)
Toshiba
Linear Position Sensors; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Maximum Output Voltage: 30 V; Maximum Operating Current: 50 mA; JESD-609 Code: e0;
SFH9202-3/4
Infineon Technologies
LINEAR POSITION SENSOR,PHOTOELECTRIC,DIFFUSE; Mounting Feature: SURFACE MOUNT; Output Type: NPN; Package Shape or Style: RECTANGULAR; Body Height: 1.9 mm; Body Length/Diameter: 4 mm;
E3JK-DR132M
LINEAR POSITION SENSOR,PHOTOELECTRIC,DIFFUSE; Mounting Feature: MOUNTING HOLE; Output Type: RELAY; Package Shape or Style: RECTANGULAR; Termination Type: CABLE; Body Width: 18 inch;
942-A4M-2D-K130E
Honeywell Sensing And Control
942-A4M-2D-K130E by Honeywell is a linear position sensor with a max measurement range of 3000mm and stainless steel housing. It operates b/w -15°C to 70°C, with a supply voltage range of 19V to 30V. Ideal for applications requiring precise ultrasonic distance measurements.
E3FA-VN112M
LINEAR POSITION SENSOR,PHOTOELECTRIC,DIFFUSE; Output Type: NPN; Package Shape or Style: CYLINDRICAL; Termination Type: WIRE; Housing: PLASTIC; Minimum Measurement Range (mm): 10 mm;
GP2Y0D02YK
Sharp Corporation
GP2Y0D02YK by Sharp Corp. is a linear position sensor with a supply voltage range of 4.5-5.5V and an output range of 0.60-4.70V, suitable for applications requiring precise distance measurements up to 900mm. With a response time of 39000us and digital voltage output type, it is ideal for surface mount installations in various industrial automation systems.
E3F1-RP21
LINEAR POSITION SENSOR,PHOTOELECTRIC,RETROREFLECTIVE; Output Type: PNP; Package Shape or Style: CYLINDRICAL; Maximum Measurement Range (mm): 3000 mm; Additional Features: IP66, REVERSE POLARITY PROTECTION, SHORT CIRCUIT PROTECTION; Termination Type: CONNECTOR;
EE-SPZ401W-01
LINEAR POSITION SENSOR,PHOTOELECTRIC,THROUGH BEAM; Mounting Feature: BOARD MOUNT; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 80mA; Termination Type: CONNECTOR;
E3FC-LP112M
LINEAR POSITION SENSOR,PHOTOELECTRIC,DIFFUSE; Output Type: PNP; Package Shape or Style: CYLINDRICAL; Termination Type: WIRE; Additional Features: IP67, IP68, IP69K; Housing: STAINLESS STEEL;
SI7210-B-15-IM2
LINEAR POSITION SENSOR, HALL EFFECT; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3;
OPB608R
Optek Technology
LINEAR POSITION SENSOR,PHOTOELECTRIC,DIFFUSE; Mounting Feature: THROUGH HOLE MOUNT; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 1-6mA; Maximum Measurement Range (mm): 7.62 mm;
E3H2-DS30B4M2M
LINEAR POSITION SENSOR,PHOTOELECTRIC,DIFFUSE; Output Type: PNP; Package Shape or Style: CYLINDRICAL; Body Height: 54.5 mm; Additional Features: IP67, REVERSE POLARITY PROTECTION, SHORT CIRCUIT PROTECTION; Minimum Supply Voltage: 10 V;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
E3S-R112M
LINEAR POSITION SENSOR,PHOTOELECTRIC,RETROREFLECTIVE; Mounting Feature: PANEL MOUNT; Output Type: NPN; Package Shape or Style: RECTANGULAR; Termination Type: WIRE; Maximum Supply Voltage: 30 V;
E3S-R122M
LINEAR POSITION SENSOR,PHOTOELECTRIC,RETROREFLECTIVE; Mounting Feature: PANEL MOUNT; Output Type: NPN; Package Shape or Style: RECTANGULAR; Maximum Operating Temperature: 40 Cel; Minimum Operating Temperature: 0 Cel;
E3S-R16
LINEAR POSITION SENSOR,PHOTOELECTRIC,RETROREFLECTIVE; Mounting Feature: PANEL MOUNT; Output Type: NPN; Package Shape or Style: RECTANGULAR; Maximum Measurement Range (mm): 1000 mm; Housing: PLASTIC;
E3S-R17
LINEAR POSITION SENSOR,PHOTOELECTRIC,RETROREFLECTIVE; Mounting Feature: PANEL MOUNT; Output Type: NPN; Package Shape or Style: RECTANGULAR; Termination Type: CONNECTOR; Additional Features: IP67, MUTUAL INTERFERENCE PREVENTION, REVERSE POLARITY PROTECTION, SHORT CIRCUIT PROTECTION;
E3S-R1E422M
LINEAR POSITION SENSOR,PHOTOELECTRIC,RETROREFLECTIVE; Mounting Feature: PANEL MOUNT; Output Type: NPN; Package Shape or Style: RECTANGULAR; Termination Type: WIRE; Additional Features: IP67, MUTUAL INTERFERENCE PREVENTION, REVERSE POLARITY PROTECTION, SHORT CIRCUIT PROTECTION;
E3S-R2E4
E3S-R2E41
E3S-R312M
LINEAR POSITION SENSOR,PHOTOELECTRIC,RETROREFLECTIVE; Mounting Feature: PANEL MOUNT; Output Type: PNP; Package Shape or Style: RECTANGULAR; Body Length/Diameter: 42.3 mm; Maximum Supply Voltage: 30 V;
E3S-R36
LINEAR POSITION SENSOR,PHOTOELECTRIC,RETROREFLECTIVE; Mounting Feature: PANEL MOUNT; Output Type: PNP; Package Shape or Style: RECTANGULAR; Termination Type: CONNECTOR; Body Length/Diameter: 42.3 mm;
E3S-R612M
LINEAR POSITION SENSOR,PHOTOELECTRIC,RETROREFLECTIVE; Mounting Feature: PANEL MOUNT; Output Type: NPN; Package Shape or Style: RECTANGULAR; Body Height: 40 mm; Output Circuit Type: Open Collector;
E3S-R622M
LINEAR POSITION SENSOR,PHOTOELECTRIC,RETROREFLECTIVE; Mounting Feature: PANEL MOUNT; Output Type: NPN; Package Shape or Style: RECTANGULAR; Maximum Supply Voltage: 30 V; Maximum Measurement Range (mm): 300 mm;
E3S-R66
LINEAR POSITION SENSOR,PHOTOELECTRIC,RETROREFLECTIVE; Mounting Feature: PANEL MOUNT; Output Type: NPN; Package Shape or Style: RECTANGULAR; Maximum Measurement Range (mm): 1000 mm; Body Height: 40 mm;
E3S-R67
LINEAR POSITION SENSOR,PHOTOELECTRIC,RETROREFLECTIVE; Mounting Feature: PANEL MOUNT; Output Type: NPN; Package Shape or Style: RECTANGULAR; Body Height: 40 mm; Minimum Supply Voltage: 10 V;
E3S-R812M
LINEAR POSITION SENSOR,PHOTOELECTRIC,RETROREFLECTIVE; Mounting Feature: PANEL MOUNT; Output Type: PNP; Package Shape or Style: RECTANGULAR; Minimum Supply Voltage: 10 V; Termination Type: WIRE;
E3S-R86
LINEAR POSITION SENSOR,PHOTOELECTRIC,RETROREFLECTIVE; Mounting Feature: PANEL MOUNT; Output Type: PNP; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Response Time: 1000 us;
E3S-RS30E422M
LINEAR POSITION SENSOR,PHOTOELECTRIC,RETROREFLECTIVE; Mounting Feature: PANEL MOUNT; Output Type: NPN; Package Shape or Style: RECTANGULAR; Body Width: 20 inch; Response Time: 1000 us;
E3S-RS30E42M
LINEAR POSITION SENSOR,PHOTOELECTRIC,RETROREFLECTIVE; Mounting Feature: PANEL MOUNT; Output Type: NPN; Package Shape or Style: RECTANGULAR; Termination Type: WIRE; Maximum Operating Temperature: 55 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved