Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): ONE-WAY ROLLER LEVER; Maximum Pre Travel: 4 mm; Sealing: IP67;
Median Price
$57.110
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
< 1k
DigiKey
1+ parts
100+ parts
$38.665
1k+ parts
-
10k+ parts
Native Components
$0.211
$0.203
Northwest PG Solutions
$0.232
$0.205
Snap Action & Limit Switches D4N-6162 attributes and parameters. Explore more Snap Action & Limit Switches devices from Omron
Actuator Travel (mm):
Type (Actuator):
Body Width:
Body Height:
Body Length/Diameter:
AC Maximum Rating R Load (Contact):
Maximum AC Contact Current:
Maximum DC Contact Current:
DC Maximum Rating R Load (Contact):
Maximum AC Contact Voltage:
Maximum DC Contact Voltage:
Electrical Life:
Manufacturer Series:
Mounting Feature:
Maximum Operating Force:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Pre Travel:
Sealing:
Switch Action:
Switch Function:
Switch Type:
Termination Type:
D4N-6162 Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.70.00
SB
PCN Design/Specification - Multiple Devices Nameplate May/2015 Multiple Series Marking/Precaution Instruction Mar/2015
As a global leader in the field of automation, OMRON’s business fields cover a broad spectrum, ranging from industrial automation and electronic components to social systems including automated ticket gates and solar power conditioners, healthcare. At present, OMRON provides products and services in around 120 countries and regions.
M39029/58-360
Tri-star Electronics International
CONNECTOR ACCESSORY; Material: COPPER ALLOY; MIL Conformity: YES; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; MIL-Connector Accessory Name: CONTACT; Terminal Type: CRIMP;
1N4148WS
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR0520LT3G
Onsemi
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
LM107H
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
SMBJ18CA
Silicon Standard
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
FDLL4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
LM358AN
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BAV99
Kec
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
Mde Semiconductor
OHN3140U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
DRV5053VAQLPG
Texas Instruments
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
Hitachi
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;
NXP Semiconductors
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
11SM2440
Honeywell Sensing And Control
11SM2440 by Honeywell is a SPDT snap action/limit switch with a plastic plunger. It has a body width of 6.35in, height of 9.04mm, and actuator travel of 0.63mm. With max DC contact voltage of 30V and current rating of 5A@30VDC, it is ideal for panel mounting applications requiring momentary switch action.
LCGHF5A10LC
C & K Components
LCGHF5A10LC by C & K Components is a SPDT snap action/limit switch with 6000 cycles electrical life. Featuring copper alloy terminals, it has a max operating force of 0.56N and operates at temperatures ranging from -25 to 85°C. Ideal for applications requiring high force actuation such as industrial machinery and automation systems.
LSA1A-4M
The Honeywell Sensing And Control LSA1A-4M is a SPDT snap action/limit switch with side rotary actuator. It has a max operating temperature of 121°C and min of -12°C. Suitable for panel mounting, it offers momentary switch action with max contact voltages of 250V DC and 600V AC.
FF6-11-DC-03-SS
FF6-11-DC-03-SS by Honeywell Sensing And Control is a 19mm snap action/limit switch with DPST function, IP67 sealing, and wire termination. It operates b/w -10°C to 55°C, making it suitable for panel mounting applications requiring momentary switch action in harsh environments.
D2F-01L3
Omron
Omron D2F-01L3 is a SPDT snap action/limit switch with 30VDC contact voltage and 0.1A current rating. Featuring IP40 sealing, it has an actuator travel of 0.5mm and operates b/w -25°C to 65°C. Ideal for applications requiring momentary switch action, such as through-hole mounting in industrial equipment.
D2F-L3-A1
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): SIMULATED ROLLER LEVER; Body Height: 5.8 mm; Maximum AC Contact Current: 3 A;
BZE6-2RN234
BZE6-2RN234 by Honeywell is a snap action/limit switch with SPDT function, IP66 sealing, and steel roller lever actuator. It has a max AC contact current of 15A@480VAC and operates in temperatures ranging from -40°C to 71°C. Ideal for panel mounting applications requiring momentary switch action with a compact body size of 77.22mm x 25.4mm x 44.45mm.
AD5721R
Honeywell Sensing And Control's AD5721R is a SNAP ACTING/LIMIT SWITCH with 11.13mm Actuator Travel and ROLLER TYPE actuator. It has a compact body size of 19.05x29.46 mm, suitable for PANEL MOUNT applications in various industries.
1SE2
1SE2 by Honeywell Sensing And Control is a 8.79" snap action/limit switch with SPST function and steel plunger actuator. It has 5A@250VAC AC rating, 5A@30VDC DC rating, and corrosion-proof sealing for panel mounting applications.
914CE31-12
The Honeywell 914CE31-12 is a SPDT snap action/limit switch with IP66, IP67, and IP68 sealing. Featuring a TOP ROLLER PLUNGER actuator type with 4mm travel, it has a max operating force of 11.8N and can handle up to 240V AC contact voltage. Ideal for panel mounting applications requiring momentary switch action in temperatures ranging from 0°C to 70°C.
Z-15ESR
Omron Z-15ESR is a SPDT snap action/limit switch with 100000 cycles electrical life. It has a slim spring plunger actuator, IP00 sealing, and can handle 15A@250VAC AC max rating. Ideal for panel mounting applications in environments ranging from -25°C to 80°C.
ASQ10230
Panasonic
The Panasonic ASQ10230 is a SNAP ACTING/LIMIT SWITCH with SPST function. It offers an Electrical Life of 200,000 cycles and IP67 sealing for durability. With a max operating temperature of 85°C, it is ideal for PANEL MOUNT applications requiring reliable switching performance.
6BS1-B
6BS1-B by Honeywell Sensing And Control is a SPDT snap action/limit switch with a stainless steel plunger. It has a max AC contact current of 10A@250VAC and DC contact current of 0.5A@125VDC. Ideal for panel mounting applications requiring momentary switch action.
XCKJ10559D
Schneider Electric Sa
SNAP ACTING/LIMIT SWITCH;
DG13-B1RA
Zf Friedrichshafen Ag
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPDT; Type (Actuator): ROLLER LEVER; Contact Function: ON-(ON); Maximum DC Contact Voltage: 30 V;
XCKJ10511
XCKJ10511 by Schneider Electric Sa is a SNAP ACTING/LIMIT SWITCH with 3A@240VAC AC Max Rating. Featuring a LOCKING LEVER actuator, it has N.O.-N.C. contact function and SNAP ACTION timing. Ideal for PANEL MOUNT applications, made of THERMOPLASTIC material with SCREW termination type.
1XE401-T
1XE401-T by Honeywell Sensing And Control is a SPDT snap action/limit switch with steel plunger actuator. It features corrosion-proof sealing, 1A@28VDC DC max rating, and 4.73N max operating force. Ideal for panel mounting applications requiring momentary switch action in industrial settings.
ABV1236503
The Panasonic ABV1236503 is a SNAP ACTING/LIMIT SWITCH with SPST switch function. It offers an Electrical Life of 100,000 cycles and sealing ratings of IP50 and IP67. Ideal for PANEL MOUNT applications, it has a compact design with dimensions of 10.3" x 15.9mm x 33mm and operates within a temperature range of -40°C to 85°C.
LSM6D3
SNAP ACTING/LIMIT SWITCH; AC Maximum Rating R Load (Contact): A@VAC; DC Maximum Rating R Load (Contact): A@VDC; Manufacturer Series: HDLS;
SS-5GL2
Omron SS-5GL2 is a SPDT snap acting/limit switch with 200000 cycles electrical life. It has a max AC contact current of 5A@125VAC and operates b/w -25 to 85 °C. With HINGE ROLLER LEVER actuator, it is ideal for panel mounting applications requiring momentary switch action.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
D4N-622H
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): ADJUSTABLE ROLLER LEVER; Body Width: 30 inch; Maximum AC Contact Voltage: 240 V;
D4N-612H
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): ADJUSTABLE ROLLER LEVER; Body Width: 30 inch; Additional Features: P.T.= 27 DEG, O.T.= 67 DEG;
D4N-6272
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): ONE-WAY ROLLER LEVER; Manufacturer Series: D4N; Maximum Operating Force: 5 N;
D4N-6187
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): PLASTIC ROD; Maximum DC Contact Voltage: 250 V; Minimum Operating Temperature: -30 Cel;
D4N-6232
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): TOP ROLLER PLUNGER; Electrical Life: 300000 Cycle(s); AC Maximum Rating R Load (Contact): 10A@240VAC;
D4N-6172
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): ONE-WAY ROLLER LEVER; Maximum Operating Force: 5 N; Body Length/Diameter: 56 mm;
D4N-6280
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): CAT WHISKER; DC Maximum Rating R Load (Contact): 2.5A@250VDC; Maximum AC Contact Current: 10 A;
D4N-6122
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): ROLLER LEVER; Body Width: 30 inch; Manufacturer Series: D4N;
D4N-6131
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): TOP PLUNGER; Maximum DC Contact Voltage: 250 V; Sealing: IP67;
D4N-6220
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): ROLLER LEVER; Manufacturer Series: D4N; Sealing: IP67;
D4N-6222
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): ROLLER LEVER; Maximum Operating Force: 5 N; Electrical Life: 300000 Cycle(s);
D4N-6231
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): TOP PLUNGER; Maximum Operating Temperature: 70 Cel; Maximum Pre Travel: 2 mm;
D4N-6262
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): ONE-WAY ROLLER LEVER; Body Width: 30 inch; Minimum Operating Temperature: -30 Cel;
D4N-612G
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): ADJUSTABLE ROLLER LEVER; Maximum Operating Force: 4.5 N; Maximum DC Contact Voltage: 250 V;
D4N-6180
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): CAT WHISKER; Additional Features: P.T.= 15 DEG, T.T.= 15 DEG; Maximum AC Contact Current: 10 A;
D4N-6120
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): ROLLER LEVER; Body Height: 56 mm; Sealing: IP67;
D4N-6125
D4N-6132
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): TOP ROLLER PLUNGER; Maximum DC Contact Current: 2.5 A; Body Length/Diameter: 56 mm;
D4N-622G
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): ADJUSTABLE ROLLER LEVER; Maximum AC Contact Voltage: 240 V; Minimum Operating Temperature: -30 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved