Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Switch Action: MOMENTARY; Body Length/Diameter: 40 mm;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Native Components
1+ parts
$188.480
100+ parts
1k+ parts
10k+ parts
$180.941
Northwest PG Solutions
$207.328
Snap Action & Limit Switches D4C-1001-DK1EJ03 attributes and parameters. Explore more Snap Action & Limit Switches devices from Omron
Actuator Travel (mm):
Type (Actuator):
Body Width:
Body Height:
Body Length/Diameter:
Maximum DC Contact Current:
DC Maximum Rating R Load (Contact):
Maximum DC Contact Voltage:
Electrical Life:
Manufacturer Series:
Mounting Feature:
Maximum Operating Force:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Pre Travel:
Sealing:
Switch Action:
Switch Function:
Switch Type:
Termination Type:
D4C-1001-DK1EJ03 Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.70.00
SB
As a global leader in the field of automation, OMRON’s business fields cover a broad spectrum, ranging from industrial automation and electronic components to social systems including automated ticket gates and solar power conditioners, healthcare. At present, OMRON provides products and services in around 120 countries and regions.
LL4148
Vishay Intertechnology
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
MBR0520LT1
Onsemi
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
MBRA160T3G
MBRA160T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.51V. It operates b/w -55 to 150°C, has a reverse test voltage of 60V, and is ideal for power applications due to its high efficiency and small outline package style.
2N7002
Diotec Semiconductor Ag
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 10; Terminal Finish: MATTE TIN;
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
EU2B-YS3203F
Idec
ROTARY SWITCH;
SS14
Rugao Dachang Electronic
RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;
SMBJ18CA
Fairchild Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT2222ALT1G
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
NC7WZ07P6X
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
BAV99
National Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
2902037
Phoenix Contact
MODULAR TERMINAL BLOCK;
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
DG13B2LA
The Cherry
The Cherry DG13B2LA snap action switch has a polyester housing and brass terminals. With an electrical life of 10,000 cycles, it operates at temperatures ranging from -25 to 85°C. Ideal for applications requiring a max AC contact current of 3A@125VAC and DC contact voltage of 30V.
3AC68
Honeywell Sensing And Control
3AC68 by Honeywell Sensing And Control is a SPDT snap action/limit switch with 12.7" body width and 38.1mm height. It has a max operating temperature of 149°C, AC contact current of 15A@250VAC, and -18°C min operating temperature. This ROD TYPE switch is ideal for PANEL MOUNT applications requiring MOMENTARY action with SCREW termination type.
BZ-RX43
BZ-RX43 by Honeywell Sensing And Control is a SPDT snap action/limit switch with 15A@480VAC AC max rating. Featuring a plastic plunger actuator, it has a body width of 17.45 inch and terminal finish of Matte Tin (Sn). Ideal for panel mounting applications requiring momentary switch action.
6088171016
Altech
SNAP ACTING/LIMIT SWITCH;
311SM605-H4
SNAP ACTING/LIMIT SWITCH; Manufacturer Series: SM;
11TL604
C & K Components
11TL604 by C & K Components is a snap action/limit switch with SPDT switch function and stainless steel plunger actuator. It has an electrical life of 150,000 cycles, insulation resistance of 1G ohm, and can handle AC contact current up to 15A@250VAC. Ideal for panel mounting applications requiring reliable switching in temperatures ranging from -55°C to 150°C.
XCMN2115L1
Schneider Electric Sa
E61-10K
The Cherry E61-10K snap action/limit switch has SPDT function, 5A@250VAC AC rating, and -40 to 85°C operating temp. Ideal for panel mounting applications requiring momentary ON-(ON) contact function with a roller lever actuator.
BZ-RX20
BZ-RX20 by Honeywell Sensing And Control is a SPDT snap action/limit switch with 15A@480VAC AC max rating. With a plastic plunger type actuator, it has a body width of 17.45 inch and can handle up to 125VDC 0.5A DC max rating. Ideal for panel mounting applications requiring momentary switch action.
DB1CA1LC
The Cherry's DB1CA1LC snap action switch has SPDT function, 6.5mm actuator travel, and 6000 cycles electrical life. Ideal for panel mounting applications with a max AC contact current of 5A@250VAC and operating temperatures ranging from -40 to 120°C.
311SM68-H4
311SM68-H4 by Honeywell is a SPDT snap action/limit switch with a body width of 6.35in and max operating temperature of 121°C. It has a max AC contact current of 1A, suitable for panel mounting applications requiring momentary switch action.
D2F-01L3-A
Omron
Omron's D2F-01L3-A snap action switch has an electrical life of 30k cycles, SPDT switch function, and IP40 sealing. With a simulated roller lever actuator type, it is ideal for applications requiring momentary switch action in environments with temperatures ranging from -25°C to 65°C.
BZ-2RL2T04
Honeywell Sensing And Control's BZ-2RL2T04 is a SPDT snap acting/limit switch with 5.48mm actuator travel and 1.39N max operating force. Its corrosion-proof sealing makes it ideal for panel mount applications requiring momentary switch action in industrial settings.
V7-1C17D844-429
Honeywell Sensing And Control's V7-1C17D844-429 is a SPDT snap action/limit switch with 10.2" width, 15.9mm height, and 3.05mm actuator travel. It operates b/w -40 to 82°C, handles up to 15A@250VAC for AC contact current, and has a max force of 1.27N. Ideal for panel mounting applications requiring momentary switch action with quick connect termination type.
MS27240-4
Honeywell Sensing And Control's MS27240-4 is a 4PDT snap action/limit switch with corrosion-proof sealing. It has a body height of 30.48 mm, actuator travel of 4.2 mm, and max DC contact voltage of 28 V. Ideal for panel mounting applications requiring momentary switch action with a max operating force of 53.38 N.
ZMA00A080L04PC
Itt Cannon
ITT Cannon's ZMA00A080L04PC is a SPDT snap action/limit switch with 300,000 cycle electrical life. Featuring gold (Au) terminal finish, it operates b/w -25 to 85 °C and handles 0.1A@30VDC DC max rating R load. With a compact body size of 5.8" x 6.5mm x 12.8mm, this switch is ideal for applications requiring momentary switch action in industrial settings.
D2D-3104
The Omron D2D-3104 is a DPST snap acting/limit switch with 4A@380VAC AC max rating, 100000 cycle electrical life, and IP40 sealing. It features a plunger actuator type with 2.3mm travel, suitable for panel mounting applications requiring momentary switch action at temperatures ranging from -25 to 85°C.
FFS-11-10
Honeywell Sensing And Control's FFS-11-10 is a 19" snap action switch (DPST) with 87mm height and 24mm length. It features momentary switch action, wire termination, and panel mounting. Ideal for applications requiring reliable switching in industrial machinery and equipment.
ZM90G70A01
ZM90G70A01 by Honeywell Sensing And Control is a SPDT snap action/limit switch with 6.4" body width, 10.6mm height, and PIN PLUNGER actuator type. It has a max operating temperature of 120°C and can handle up to 10.1A@250VAC current. Ideal for panel mounting applications requiring momentary switch action with quick connect termination.
111SM1-T2
111SM1-T2 by Honeywell is a SPDT snap action/limit switch with 5A@250VAC rating. Featuring a straight lever actuator, it has an operating force of 1.9599N and an actuator travel of 5.588mm. Ideal for panel mounting applications requiring momentary switch action in industrial settings.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
D4C-1632
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SEALED ROLLER PLUNGER; Maximum Operating Temperature: 70 Cel; Termination Type: WIRE;
D4C-1603
The Omron D4C-1603 is a snap action and limit switch with a 200000 cycle electrical life. It has a body width of 16 inch and sealing rating of IP67, making it suitable for various applications. With a max AC contact current of 5A and a max DC contact current of 4A, it provides reliable switching performance in industrial settings.
D4C-1424
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): ROLLER LEVER; Maximum Operating Temperature: 70 Cel; Manufacturer Series: D4C;
D4C-1524
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): ROLLER LEVER; Body Length/Diameter: 40 mm; Additional Features: O.T. = 50 DEG, P.T. = 13 DEG, D.T. = 3 DEG, T.T.= 63 DEG;
D4C-1620
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): ROLLER LEVER; AC Maximum Rating R Load (Contact): 5A@250VAC; Switch Action: MOMENTARY;
D4C-1601
Omron D4C-1601 is a SPDT snap action/limit switch with 200000 cycles electrical life. With IP67 sealing, it operates b/w -10°C to 70°C. Ideal for panel mounting applications, it has a max AC contact current of 5A@250VAC and DC contact current of 4A@30VDC.
D4C-1203-M
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): CROSSROLLER PLUNGER; Maximum Pre Travel: 1.8 mm; Electrical Life: 200000 Cycle(s);
D4C-1032-AK1EJ03
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SEALED ROLLER PLUNGER; Maximum AC Contact Current: 1 A; AC Maximum Rating R Load (Contact): 1A@125VAC;
D4C-1220
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): ROLLER LEVER; Maximum Operating Force: 5.69 N; Maximum AC Contact Voltage: 250 V;
D4C-1220-P
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): ROLLER LEVER; Switch Action: MOMENTARY; Electrical Life: 200000 Cycle(s);
D4C-1024-AK1EJ03
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): ROLLER LEVER; Sealing: IP67; Electrical Life: 200000 Cycle(s);
D4C-1102
D4C-1203
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): CROSSROLLER PLUNGER; Maximum Operating Force: 6.86 N; Maximum AC Contact Voltage: 250 V;
D4C-1031-DK1EJ03
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SEALED PIN PLUNGER; Electrical Life: 200000 Cycle(s); Actuator Travel (mm): 4.8;
D4C-1210
D4C-1002-DK1EJ03
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): ROLLER PLUNGER; Body Height: 51.5 mm; Body Width: 16 inch;
D4C-1201
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Body Width: 16 inch; Maximum AC Contact Current: 5 A;
D4C-1024-DK1EJ03
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): ROLLER LEVER; Body Length/Diameter: 40 mm; Termination Type: WIRE;
D4C-1201-M
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Termination Type: WIRE; Maximum Operating Temperature: 70 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved