Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Sealing: IP40; null: 4; Maximum Contact DC Rating (R Load): 0.025A@24VDC; Body Height: 5 mm;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Native Components
1+ parts
100+ parts
1k+ parts
10k+ parts
Northwest PG Solutions
DIP & SIP Switches A6SR-4104-R100 attributes and parameters. Explore more DIP & SIP Switches devices from Omron
Insulation Resistance:
Contact Resistance:
Contact Maximum DC Rating (R Load):
Contact Maximum DC Current:
Contact Maximum DC Voltage:
Contact Maximum DC Power Rating (R Load):
Mounting Type:
Length/Diameter:
Height:
Width:
Packing Method:
Termination Type:
Terminal Finish:
Minimum Operating Temperature:
Maximum Operating Temperature:
Sealing Type:
Lifespan:
JESD-609 Code:
Additional Features:
A6SR-4104-R100 Relays trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.90.40
SB
As a global leader in the field of automation, OMRON’s business fields cover a broad spectrum, ranging from industrial automation and electronic components to social systems including automated ticket gates and solar power conditioners, healthcare. At present, OMRON provides products and services in around 120 countries and regions.
1N4148
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ULN2003ADR
Texas Instruments
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
Dc Components
SMBJ18CA
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
EU2B-YS303C
Idec
ROTARY SWITCH;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
BAV99
Transys Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SS14
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
2N2222A
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
NUP2105LT1G
Onsemi
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
DS18B20U+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;
LM317AEMP/NOPB
LM317AEMP/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package.
218-8LPSTR
Cts
218-8LPSTR by Cts is a slide DIP switch with 8 sections, SPST function, and gold terminal finish. It has an electrical life of 1000 cycles and operates b/w -55 to 85°C. Ideal for surface mount applications requiring latched switch action at a max contact rating of 0.025A@24VDC.
A6D-6103
Omron
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; null: LATCHED; Sealing: IP64; Terminal Finish: GOLD; null: 500VAC;
A6HR-2104
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Maximum Operating Temperature: 85 Cel; Packing Method: TUBE; Minimum Operating Temperature: -30 Cel; Body Width: 3.67 inch;
1-1825059-1
TE Connectivity
TE Connectivity 1-1825059-1 is a SPST slide DIP switch with 3 positions. It features polyphenylene sulfide housing, copper alloy terminals, and gold-plated center contacts. Ideal for panel mounting applications requiring a latched OFF-ON contact function at temperatures ranging from -30°C to 85°C.
416131160802
Wuerth Elektronik & Kg
Wurth Elektronik 416131160802 is a DPST slide DIP switch with gold-plated contacts. It has a 1000-cycle electrical life, 100M ohm insulation resistance, and operates b/w -40 to 85°C. Ideal for applications requiring reliable switching in electronic circuits.
219-2LPSTJRF
The Cts 219-2LPSTJRF is a DIP switch with SPST function, gold plating, and polyethylene housing. It has 2000 cycles electrical life, 1000000000 ohm insulation resistance, and operates b/w -55 to 85 °C. Ideal for OFF-ON contact functions in electronic devices requiring a latched slide switch with solder termination.
90B02ST
Grayhill
Grayhill's 90B02ST is a DIP switch with 2000 cycles electrical life, SPST switch function, and top tape sealing. Ideal for applications requiring a slide DIP switch with 0.1A@6VDC max contact DC rating, such as through-hole-straight mounting in electronic devices.
A6T-0102
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; null: SPST; Additional Features: WITH SEAL TAPE; Body Length/Diameter: 26.34 mm; Contact Resistance: 200 mohm;
A6FR-0101
DIP Switches; null: PIANO DIP SWITCH;
1825059-3
Tyco Electronics Amp
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Maximum Contact DC Rating (R Load): 0.1A@24VDC; Body Height: 3.5 mm; Termination Type: SOLDER; null: 2;
A6SN-7102-P
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Minimum Operating Temperature: -30 Cel; Maximum Operating Temperature: 85 Cel; Electrical Life: 1000 Cycle(s); Contact Resistance: 200 mohm;
435668-7
TE Connectivity's 435668-7 DIP & SIP Switch features SPST switch function, 8 positions, and gold over nickel end contact plating. With a max AC contact current of 1A, it is ideal for applications requiring ON-OFF contact function in electronic devices. The switch has a glass-filled polyester housing material and operates within a temperature range of -55 to 105°C.
1825911-1
TE Connectivity 1825911-1 is a SLIDE DIP SWITCH with 8 sections, GOLD/NICKEL plating, and COPPER ALLOY terminals. With electrical life of 1000 cycles, it operates b/w -30 to 85 °C. Ideal for applications requiring surface mount-straight mounting feature and 0.1A@24VDC max contact DC rating.
1825058-7
TE Connectivity 1825058-7 is a SPST slide DIP switch with 4 positions and extended actuator type. It features gold over nickel plating, copper alloy terminals, and polyphenylene sulfide housing material. Ideal for applications requiring off-on contact function in electronic devices.
435470-1
Tyco Electronics Alcoswitch
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; Additional Features: LOW PROFILE; null: LATCHED; null: SPDT; Termination Type: SOLDER;
TDA10H0SB1
C & K Components
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Maximum Operating Temperature: 85 Cel; null: SLIDE DIP SWITCH; null: SLIDE; Maximum DC Contact Voltage: 24 V;
A6S-4101-H
Omron A6S-4101-H DIP & SIP Switch offers 1000 cycles Electrical Life, 100M ohm Insulation Resistance, and SPST Switch Function. Ideal for applications requiring a compact design with 4 switch sections, such as consumer electronics and industrial control systems.
3-435640-5
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; Body Width: 9.65 inch; Terminal Finish: Tin/Lead (Sn/Pb); Termination Type: SOLDER; Body Length/Diameter: 12.19 mm;
A6SN-0104
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: .039 inch; null: 10; null: 300VAC; null: SPST;
A6S-2101
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Body Height: 3 mm; Body Length/Diameter: 6.2 mm; null: SPST; JESD-609 Code: e4;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
A6SR-4101
The Omron A6SR-4101 is a white DIP & SIP switch with a 1000 cycle electrical life and 100000000 ohm insulation resistance. It has a max DC contact rating of 0.025A@24VDC and is commonly used in surface mount applications.
A6SR-2104
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Packing Method: TUBE; Terminal Finish: Gold (Au); null: .035 inch; Maximum DC Contact Current: .025 A;
A6SR-8101
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Maximum Operating Temperature: 70 Cel; Body Height: 5 mm; Terminal Finish: Gold (Au); Sealing: IP40;
A6SR-2101
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Additional Features: LOW PROFILE; null: 2; Minimum Operating Temperature: -20 Cel; Termination Type: SOLDER;
A6SR-4101-P
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Body Height: 5 mm; Sealing: IP40; Insulation Resistance: 100000000 ohm; Maximum DC Contact Current: .025 A;
A6SR-6104
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Maximum Operating Temperature: 70 Cel; Maximum Contact DC Rating (R Load): 0.025A@24VDC; null: SPST; Terminal Finish: Gold (Au);
A6SR-2104-P
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Minimum Operating Temperature: -20 Cel; Additional Features: LOW PROFILE; Body Width: 4.98 inch; Maximum DC Contact Voltage: 24 V;
A6SR-8101-P
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Sealing: IP40; null: 8; Electrical Life: 1000 Cycle(s); null: 500VAC;
A6SR-0101-P
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: WHITE; Maximum Operating Temperature: 70 Cel; Body Width: 6 inch; Packing Method: TR;
A6SR-4104
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Maximum Operating Temperature: 70 Cel; Body Length/Diameter: 10.06 mm; Contact Resistance: 200 mohm; Additional Features: LOW PROFILE;
A6SR-2101-P
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Electrical Life: 1000 Cycle(s); Contact Resistance: 200 mohm; null: MOMENTARY; JESD-609 Code: e4;
A6SR-4104-P
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Insulation Resistance: 100000000 ohm; null: .035 inch; Maximum DC Contact Current: .025 A; Body Length/Diameter: 10.06 mm;
A6SR-6101-P
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Insulation Resistance: 100000000 ohm; null: PIANO DIP SWITCH; null: 6; Electrical Life: 1000 Cycle(s);
A6SR-6104-P
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Contact Resistance: 200 mohm; Body Width: 6 inch; Sealing: IP40; null: 6;
A6SR-0104-P
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Body Height: 5 mm; Sealing: IP40; null: PIANO DIP SWITCH; Body Length/Diameter: 25.3 mm;
A6SR-0101
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Maximum Operating Temperature: 70 Cel; Minimum Operating Temperature: -20 Cel; Termination Type: SOLDER; Body Width: 6 inch;
A6SR-0104
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: MOMENTARY; Maximum DC Contact Voltage: 24 V; JESD-609 Code: e4; null: 10;
A6SR-2101-R100
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: 2; Body Length/Diameter: 6 mm; Packing Method: TR, EMBOSSED; Additional Features: LOW PROFILE;
A6SR-6101
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Packing Method: TUBE; Contact Resistance: 200 mohm; Maximum Contact DC Rating (R Load): 0.025A@24VDC; Maximum DC Contact Voltage: 24 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved