Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FIXED RESISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 20 ohm; Rated Power Dissipation (P): 15 W; Maximum Operating Temperature: 275 Cel; Tolerance: 5 %;
Median Price
$0.612
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
DigiKey
1+ parts
$0.540
100+ parts
-
1k+ parts
10k+ parts
Mouser Electronics
$0.750
$0.656
$0.537
$0.467
Master Electronics
$0.527
$0.455
Verical
$0.685
$0.607
IBS Electronics
$0.592
Fixed Resistors TUW15J20RE attributes and parameters. Explore more Fixed Resistors devices from Ohmite Manufacturing
Additional Features:
Construction:
Diameter (Lead):
Length (Lead):
Manufacturer Series:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Resistor Type:
Series:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Terminal Shape:
Tolerance:
Operating Voltage:
TUW15J20RE Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.21.00.80
SB
measuring instruments.
SMBJ18CA
KYOCERA AVX
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDC5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
LL4148
Promax-johnton
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
OPA2277UA/2K5
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
OHN3020U
Tt Electronics Plc
OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.
C1206C104K5RACTU
KEMET Corporation
KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
M39029/56-351
TE Connectivity
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
SS14
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDD5614P
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
SPC TECHNOLOGY/ MULTICOMP
MMBF170LT1G
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
CRGCQ0805F10R
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
General Semiconductor
LM7805CT/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
Secos
LM358D-T
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
2N2222A
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
USB3320C-EZK-TR
Standard Microsystems
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
CRCW040227K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040227K0FKED is a fixed resistor with 27000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating temperature range of -55 to 155 °C.
ERJ8ENF10R0V
Panasonic
ERJ8ENF10R0V by Panasonic is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. It is ideal for surface mount applications in electronics due to its compact rectangular package and high operating temperature range of -55 to 155 °C. The metal glaze/thick film technology ensures reliable performance in various environments.
TNPW080510K0FEEA
Vishay Intertechnology's TNPW080510K0FEEA is a thin film fixed resistor with 10000 ohm resistance, 1% tolerance, and 125 °C max operating temperature. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance.
RK73H1ETTP10R0F
Koa Speer Electronics
RK73H1ETTP10R0F by Koa Speer Electronics is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for automotive applications due to AEC-Q200 reference standard, operating voltage of 75 V, and temperature range from -55 to 155 °C.
CRCW060310R0FKTA
Vishay Intertechnology's CRCW060310R0FKTA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 75 V.
CRCW1206100RFKEAHP
Vishay Intertechnology's CRCW1206100RFKEAHP is a fixed resistor with 100 ohm resistance, 1% tolerance, and 0.75 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 200 V. Temperature coefficient of 100 ppm/°C ensures stable performance from -55 to 155 °C.
RLP73K2BR27JTD
RLP73K2BR27JTD by TE Connectivity is a fixed resistor with a resistance of 0.27 ohm and a tolerance of 5%. It is a surface mount component with dimensions of 3.1mm x 1.55mm x 0.55mm, making it suitable for various electronic applications.
RMCF0603FT100K
Stackpole Electronics
RMCF0603FT100K by Stackpole Electronics is a fixed resistor with 100000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It is ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard certification and operating temperature range of -55 to 155 °C.
CRCW04021K00FKEDC
Vishay Intertechnology's CRCW04021K00FKEDC is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
CRCW06036K80FKEAHP
Vishay Intertechnology's CRCW06036K80FKEAHP is a fixed resistor with 6800 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 75 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
RCU-0C
TE Connectivity's RCU-0C is a METAL FOIL resistor with 0 ohm resistance. It comes in a RECTANGULAR PACKAGE, SMT style, and WRAPAROUND terminals. Ideal for jumper applications, it operates b/w -55 to 125 °C and measures 1.6mm x 0.8mm x 1.15mm in size.
RC0402FR-07560RL
Yageo
Yageo's RC0402FR-07560RL is a fixed resistor with 560 ohm resistance, 1% tolerance, and 0.0625 W power dissipation. It operates b/w -55 to 155 °C and has a temperature coefficient of 100 ppm/°C. Ideal for surface mount applications in various electronic circuits.
RC0402FR-0715KL
Yageo's RC0402FR-0715KL is a fixed resistor with 15000 ohm resistance, 1% tolerance, and 0.0625 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
MCT06030C1000FP500
Vishay Intertechnology's MCT06030C1000FP500 is a thin film fixed resistor with 100 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 125 °C and has a temperature coefficient of 50 ppm/°C. Ideal for surface mount applications in electronics requiring precise resistance values.
RESKIT1206RS
TE Connectivity's RESKIT1206RS is a 2-terminal fixed resistor with thick film technology. It has dimensions of 1mm x 0.5mm x 0.35mm and a temperature coefficient of 100 ppm/°C. With a tolerance of 5% and rated power dissipation of 0.25W, it is commonly used in electronic circuits for precise resistance applications.
CRCW080510R0FKEAC
Vishay Intertechnology's CRCW080510R0FKEAC is a fixed resistor with a resistance of 10 ohm and a tolerance of 1%. It operates at temperatures ranging from -55 to 155 °C and is commonly used in surface mount applications.
RK73Z1ETTP
RK73Z1ETTP by Koa Speer Electronics is a fixed resistor with a resistance of 0 ohm. It has a rectangular construction and is suitable for surface mount applications. With a rated temperature range of -55 to 155 °C, it meets AEC-Q200 and IEC60115-8 standards.
CRCW040220K0FKEDHP
Vishay Intertechnology's CRCW040220K0FKEDHP is a fixed resistor with 20000 ohm resistance, 1% tolerance, and 0.2 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and operating voltage of 50 V.
ERA6AEB105V
ERA6AEB105V by Panasonic is a fixed resistor with a resistance of 1000000 ohm and tolerance of 0.1%. It operates at temperatures ranging from -55 to 155 °C and has a max power dissipation of 0.125 W. It is commonly used in surface mount applications requiring high precision and reliability.
RC0402FR-072.2RL
Yageo's RC0402FR-072.2RL is a 2.2 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a temperature coefficient of 200 ppm/°C, it operates b/w -55 to 155 °C and can handle up to 50V voltage, making it ideal for various electronic circuits.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Ohmite Manufacturing
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved