Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NXP Semiconductors' PCF85176T/1Y is a graphics display driver with dot matrix and segment display modes, serial data input, and 20-digit capacity. It operates b/w -40 to 85 °C with a supply voltage range of 1.8-5.5 V, making it suitable for LCD driver applications requiring multiplexed display capability in compact designs.
Median Price
$1.940
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Chip1Stop
1+ parts
100+ parts
$1.090
1k+ parts
$0.930
10k+ parts
$0.909
DigiKey
$2.400
$1.453
$1.333
-
Mouser Electronics
$1.460
$1.310
$1.210
Avnet
EBV Elektronik
Arrow
$1.107
Verical
Nova Conductors
$1.208
Digiode
$1.843
Chip Stock
ComSIT Distribution GmbH
Vyrian
IBS Electronics
$1.459
Anansix
Ampacity Inc.
$0.760
Semicontronic
$0.741
$0.737
Continental Prestige Electronics
$1.183
Argo Parts USA
Netroflash
$1.147
$1.123
Corphita
$1.746
Aztec Data Supply Inc.
$5.560
Microchip USA
$6.562
Corohmni
$13.485
AZTECH Wire
$13.580
UNI Independent Distributors
Authorized Procurement Solutions
Lixinc
Robosynatics
$2.218
$2.172
Lucentia Tech
The use of plastic/epoxy material makes this product lightweight and durable, ideal for portable devices.
This dual display mode offers versatility for different types of visual information to be presented, enhancing user experience.
The serial data input mode allows for easy integration with other systems, simplifying the setup process.
Being surface mountable, this product can be easily installed on circuit boards, saving space and reducing assembly time.
The high maximum supply voltage ensures stable and reliable performance, making it suitable for various power sources.
The rectangular package shape provides a compact form factor, maximizing space efficiency in device design.
With an even higher maximum supply voltage, this product can withstand voltage fluctuations, increasing its robustness.
The ample number of terminals allows for a variety of connections, enabling compatibility with different system configurations.
The small outline, thin profile, and shrink pitch package style saves PCB space and enhances overall aesthetics of the device.
The low minimum supply voltage ensures energy efficiency and compatibility with a wide range of power sources.
Graphics Display Drivers PCF85176T/1Y attributes and parameters. Explore more Graphics Display Drivers devices from NXP Semiconductors
Additional Features:
Data Input Mode:
Display Mode:
Input Characteristics:
Interface IC Type:
JESD-30 Code:
Length:
Moisture Sensitivity Level (MSL):
Multiplexed Display Capability:
No. of Digits/Characters:
No. of Functions:
No. of Segments:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Maximum Supply Voltage-1:
Minimum Supply Voltage-1:
Nominal Supply Voltage-1:
Surface Mount:
Technology:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
Minimum fmax:
PCF85176T/1Y Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
NXP is a leading semiconductor company that creates cutting-edge technology to power secure connections in a smarter world. Founded in 2006, they have grown to become one of the top five global semiconductor companies and serve their customers in over 70 countries around the world.
Executive Director, President, CEO
Kurt Sievers
Executive VP, CFO
Bill Betz
Executive VP, Chief Sales Officer
Ron Martino
ICN8
Fabrication
Fab Initiation
1996
Netherlands
Nijmegen
Wafer Capacity
55,000
ATMC (Austin Tech & Mfg Center)
1995
USA
Austin
30,000
N/A
1989
Germany
Boeblingen
CHD
1993
Chandler
OHTC
1991
24,000
New Expansion Fab
2026
ECHO
2020
10,000
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
2N2222A
Texas Instruments
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
TCA6424ARGJR
TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SS14
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
CRG0805F10K
TE Connectivity
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
USBLC6-2SC6
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
SMBJ18CA
Meritek Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
BAV99
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
LM7805CT
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
BAT54SLT1G
Onsemi
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
Synsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
Eic Semiconductor
Db Lectro
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
PCA9622DR
NXP Semiconductors
PCA9622DR by NXP Semiconductors is a LED display driver with 32 terminals, operating voltage range of 2.3V to 5.5V, and serial data input mode. It has a small outline package style suitable for industrial applications requiring a max temperature of 85°C.
MAX7219EWG+T
Maxim Integrated
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR;
ICM7224IPL
ICM7224IPL by Maxim Integrated is a 40-terminal graphics display driver with serial data input mode. It operates b/w -20 to 85 °C and supports liquid crystal displays with 29 segments. With a CMOS technology, it has a max supply voltage of 6 V and min of 3 V, making it suitable for various display applications.
MAX7221EWG+T
Analog Devices
Analog Devices' MAX7221EWG+T is a Graphics Display Driver with 8-digit display capability, operating at 5V. It features serial data input mode, segment display mode, and can handle up to 7 segments. Ideal for industrial applications requiring LED display drivers in small outline packages.
AL8807MP-13
Diodes Incorporated
AL8807MP-13 by Diodes Inc. is a LED display driver with 8 terminals, operating voltage range of 6-30V, and temp grade for automotive applications. It comes in a small outline package with matte tin finish, suitable for graphics displays requiring high temperature tolerance up to 125°C.
LM3409HVMY
LM3409HVMY by Texas Instruments is a LED display driver with a supply voltage range of 6V to 42V, suitable for automotive applications. This small outline package IC has 10 terminals and operates b/w -40°C to 125°C. With gull wing terminal form and 0.5mm pitch, it's ideal for graphics display drivers in compact designs.
MP3301GJ-Z
Monolithic Power Systems
MP3301GJ-Z by Monolithic Power Systems is a graphics display driver with a max supply voltage of 6V. It has a small outline, very thin profile package style and is suitable for automotive applications. With 10 segments and a nominal voltage of 5V, it is an ideal choice for LED display driver interface ICs.
PCF8577CT/3,112
NXP Semiconductors' PCF8577CT/3,112 is a graphics display driver with dot matrix display mode and serial data input. It operates b/w -40 to 85 °C and supports multiplexed displays. Ideal for industrial applications requiring a CMOS technology-based LCD driver with 32 segments and low supply current of 0.125 mA at 5 V.
PCF8577CT/3,118
PCF8577CT/3,118 by NXP Semiconductors is a graphics display driver with dot matrix display mode and serial data input. It operates b/w -40 to 85 °C with a supply voltage range of 2.5-6 V, suitable for industrial applications requiring multiplexed display capability.
LM3509SDX/NOPB
LM3509SDX/NOPB by Texas Instruments is a graphics display driver with 10 terminals, operating voltage range of 2.7V to 5.5V, and constant-current output for LED displays. It features a small outline package style, dual terminal position, and matte tin finish suitable for industrial temperature grades applications requiring multiplexed display capability.
TLC5940PWPG4
TLC5940PWPG4 by Texas Instruments is a graphics display driver with 16 segments, operating at 30 MHz. It features a serial data input mode and open-drain output characteristics. Ideal for LED displays, it has a max supply voltage of 5.5 V and operates in industrial temperature grades from -40 to 85 °C.
ISL97671AIRZ-T
Renesas Electronics
ISL97671AIRZ-T by Renesas Electronics is a graphics display driver with 20 terminals, operating voltage range of 4.5V to 26.5V, and serial data input mode. It is designed for LED display applications, featuring a compact rectangular chip carrier package with very thin profile suitable for surface mount assembly. With an output polarity of TRUE and standard input characteristics, this driver offers reliable performance in a wide temperature range from -40°C to 85°C.
MCP1662T-E/OT
Microchip Technology
MCP1662T-E/OT by Microchip Technology is a graphics display driver with 3.3V power supply, operating temperature range of -40 to 125 °C, and terminal finish in matte tin. It has 5 terminals, small outline package style, and is suitable for automotive applications as an LED display driver interface IC.
TLD1311ELXUMA1
Infineon Technologies
TLD1311ELXUMA1 by Infineon Technologies is a graphics display driver with a max supply voltage of 40V. It is a small outline, low profile package with 14 terminals and a gull wing terminal form. This LED display driver is suitable for various applications requiring high-quality graphics.
LP5036RJVR
LP5036RJVR by Texas Instruments is a SERIAL graphics display driver with 36 channels and segments. It operates b/w -40 to 125 °C, suitable for automotive applications. With a supply voltage range of 2.7V to 5.5V, it offers a max fmax of 0.4 MHz for LED displays.
MAX25611AATC/VY+
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 12; Package Code: HVQCCN; Package Shape: SQUARE;
AL8861MP-13
LED DISPLAY DRIVER; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 30;
MAX7221EWG+
MAX7221EWG+ by Analog Devices is a Graphics Display Driver with 8-digit display capability. It operates on a supply voltage range of 4-5.5V, featuring serial data input mode and segment display mode. Ideal for industrial applications requiring multiplexed LED displays in compact spaces.
PCA9635PW
PCA9635PW by NXP Semiconductors is a serial graphics display driver with 16 segments. It operates b/w -40 to 85 °C and supports a supply voltage range of 2.3-5.5 V. Ideal for LED displays, it comes in a small outline package with dual terminals and Gull Wing form factor.
AL8871QT16E-13
AL8871QT16E-13 by Diodes Inc. is a graphics display driver with 16 terminals, operating from -40 to 125 °C. It has a supply voltage range of 8-60 V and is suitable for automotive applications due to its small outline package style and matte tin terminal finish.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
PCF85134HL/1,118
PCF85134HL/1,118 by NXP Semiconductors is a graphics display driver with dot matrix and segment display modes. It operates at a voltage range of 1.8V to 5.5V, making it suitable for industrial applications. With 7-digit characters and 60 segments, this CMOS technology-based driver offers multiplexed display capability for liquid crystal displays.
PCF85176H/1,518
PCF85176H/1,518 by NXP Semiconductors is a graphics display driver with dot matrix display mode and serial data input. It operates at 1.8-5.5V, suitable for industrial applications. With 64 terminals and small outline package style, it offers multiplexed display capability for liquid crystal displays.
PCF8566T/1,118
PCF8566T/1,118 by NXP Semiconductors is a 40-terminal graphics display driver with serial data input mode. It operates at supply voltages of 2.5V to 3.5V and supports multiplexed display capability for industrial temperature grade applications. The IC features a segment display mode and Gull Wing terminal form, making it suitable for liquid crystal displays in various electronic devices.
PCF8566TS/1,118
PCF8566TS/1,118 by NXP Semiconductors is a graphics display driver with 12-digit display capability. It operates on a supply voltage range of 2.5V to 3.5V and features a segment display mode for industrial applications. The IC has a max operating temperature of 85°C and supports multiplexed displays with low power consumption at 0.09mA max supply current.
PCF85162T/1Y
LIQUID CRYSTAL DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: TSSOP; Package Shape: RECTANGULAR;
PCF8566T/1,112
PCF8566T/1,112 by NXP Semiconductors is a 40-terminal graphics display driver with segment display mode and serial data input. It operates at a voltage range of 2.5V to 6V, suitable for industrial applications requiring multiplexed display capability in temperatures ranging from -40°C to 85°C.
PCF8576CT/1,518
LIQUID CRYSTAL DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 56; Package Code: SSOP; Package Shape: RECTANGULAR;
PCF85176T/1,118
PCF85176T/1,118 by NXP Semiconductors is a DOT MATRIX display driver with SERIAL data input mode. It operates at 1.8-5.5V and supports up to 40 segments for industrial-grade applications requiring multiplexed display capability.
PCF85162T/1,118
NXP Semiconductors PCF85162T/1,118 is a Graphics Display Driver with 32 segments and 16 digits. It operates at a voltage range of 1.8V to 5.5V, making it suitable for industrial applications requiring multiplexed display capability. The driver features a small outline package with dual terminal position and Gull Wing form factor for easy surface mount installation.
PCF8566T
LIQUID CRYSTAL DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 40; Package Code: SSOP; Package Shape: RECTANGULAR;
PCF8566T/1
PCF8566T/1 by NXP Semiconductors is a graphics display driver with a segment display mode and serial data input. It has a small outline, shrink pitch package style and can operate in industrial temperature grades. It is commonly used as an interface IC for liquid crystal displays (LCDs).
PCF8562TT/2,118
PCF8566T/S480/1,11
PCF8566TD
PCF85176T/1
LIQUID CRYSTAL DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 56; Package Code: TSSOP; Package Shape: RECTANGULAR;
PCF85176T
LIQUID CRYSTAL DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 56; Package Code: SON; Package Shape: RECTANGULAR;
PCF8576DT/2,118
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved