Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 52; Package Code: HSSOP; Package Shape: RECTANGULAR; Terminal Position: DUAL;
Median Price
$6.116
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
DigiKey
1+ parts
-
100+ parts
1k+ parts
$5.320
10k+ parts
Verical
$6.913
Digiode
Flip Electronics
Anansix
Vyrian
Microchip USA
$15.234
One Stop Electronics
$19.500
UNI Independent Distributors
Authorized Procurement Solutions
Corphita
Peripheral Drivers MC07XS6517BEKR2 attributes and parameters. Explore more Peripheral Drivers devices from NXP Semiconductors
Built-in Protections:
Driver No. of Bits:
Input Characteristics:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Current Flow Direction:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Screening Level:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Maximum Supply Voltage-1:
Minimum Supply Voltage-1:
Nominal Supply Voltage-1:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Turn-off Time:
Turn-on Time:
Width:
MC07XS6517BEKR2 Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
NXP is a leading semiconductor company that creates cutting-edge technology to power secure connections in a smarter world. Founded in 2006, they have grown to become one of the top five global semiconductor companies and serve their customers in over 70 countries around the world.
Executive Director, President, CEO
Kurt Sievers
Executive VP, CFO
Bill Betz
Executive VP, Chief Sales Officer
Ron Martino
ICN8
Fabrication
Fab Initiation
1996
Netherlands
Nijmegen
Wafer Capacity
55,000
ATMC (Austin Tech & Mfg Center)
1995
USA
Austin
30,000
N/A
1989
Germany
Boeblingen
CHD
1993
Chandler
OHTC
1991
24,000
New Expansion Fab
2026
ECHO
2020
10,000
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
1N4148
Won-top Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
2N2222A
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
MMBT2222ALT1G
Rochester Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
SMBJ18CA
Uniohm
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
M39029/58-360
CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;
DS18B20Z
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Accuracy (Cel): 0.50;
M39029/56351
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
SS14
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Shandong Yiguang Electronic Joint Stock
LM317T
Analog Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
Unitrode
EU2B-YS3203F
Idec
ROTARY SWITCH;
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
1N4148WS
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
VN920B5-E
STMicroelectronics
STMicroelectronics' VN920B5-E is a peripheral driver with 36V max supply voltage, 10A max output current, and built-in protections. Ideal for applications requiring source flow direction, such as automotive systems, industrial controls, and power management circuits.
VNS1NV04PTR-E
VNS1NV04PTR-E by STMicroelectronics is a peripheral driver with built-in protections for transient, over current, and over voltage. It has 8 terminals in a small outline package style, suitable for applications requiring a nominal voltage of 5V. With a turn-on time of 1us and output current flow direction as sink, it offers efficient performance in various electronic systems.
DS2482S-100+T&R
DS2482S-100+T&R by Analog Devices is a peripheral driver with 8 terminals, operating at -40 to 85°C. It has a supply voltage range of 2.9V to 5.5V and turn-off time of 2.2µs. Ideal for industrial applications requiring buffer or inverter based interface ICs in compact designs.
BTS4880R
Infineon Technologies
BTS4880R by Infineon is a peripheral driver with 8 functions, AEC-Q100 screening level, and built-in protections. It operates at supply voltages of 11-45V, with output peak current limit of 1.4A. Ideal for automotive applications requiring high reliability and protection against transient, over/under voltage, thermal issues.
LMG1020YFFT
Texas Instruments
LMG1020YFFT by Texas Instruments is a peripheral driver with 6 terminals, operating voltage range of 4.75V to 5.25V, and max output current of 7A. It features built-in thermal and under voltage protections, making it suitable for automotive applications requiring fast turn-on/off times and source/sink current flow direction control.
VND5160JTR-E
VND5160JTR-E by STMicroelectronics is a Peripheral Driver with 2 functions, operating at 4.5-36 V. It offers built-in protections against transient, over current, and over voltage. This CMOS technology driver has a turn-on time of 10 us and is ideal for BUFFER OR INVERTER BASED applications.
NUD3112DMT1G
Onsemi
NUD3112DMT1G by Onsemi is a Peripheral Driver with 2 functions, offering transient protection. It operates in industrial temperature range (-40 to 85°C) and has a max output current of 0.5A. Ideal for applications requiring buffer or inverter based peripheral drivers with sink output current flow direction.
TPS22810DBVR
TPS22810DBVR by Texas Instruments is a 6-terminal peripheral driver with max supply voltage of 18V and output current of 2A. It operates b/w -40 to 105°C, suitable for industrial applications requiring transient, thermal, and under-voltage protections. The small outline package with gull wing terminals makes it ideal for surface mount designs in compact spaces.
HCPL-316J
Agilent Technologies
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
MAX845ESA+
Maxim Integrated
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
HCPL-316J#500
Broadcom
HCPL-316J#500 by Broadcom is a Peripheral Driver with 16 terminals, operating voltage range of 4.5V to 5.5V, and built-in protections against over/under voltage. It features a small outline package style suitable for industrial applications requiring a nominal output peak current limit of 2.5A and sink flow direction.
CSD88599Q5DCT
CSD88599Q5DCT by Texas Instruments is a half bridge based peripheral driver with a max supply voltage of 54V and operating temperature range of -55 to 150°C. With 22 terminals in a small outline package, it is ideal for applications requiring source and sink output current flow direction in military-grade environments.
BSP752R
BSP752R by Infineon Technologies is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates at supply voltages ranging from 6V to 52V and has a max output current of 1.3A. This MOS technology-based device is ideal for applications requiring buffer or inverter based peripheral drivers in automotive systems.
FPF2100
Fairchild Semiconductor
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;
BSP452E6327
Siemens
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Shape: RECTANGULAR; Turn-off Time: 150 us; Nominal Output Peak Current Limit: 1.7 A;
ISP772TFUMA1
ISP772TFUMA1 by Infineon Technologies is a Peripheral Driver with 8 terminals, offering built-in protections against transient, over current, and over voltage. It operates b/w -30 to 85 °C with a supply voltage range of 5-34 V. Ideal for applications requiring buffer or inverter based peripheral drivers.
NUD3160DMT1G
NUD3160DMT1G by Onsemi is a Peripheral Driver with 2 functions, operating at -40 to 125 °C. It has a max supply voltage of 60 V and output current of 0.15 A. Ideal for automotive applications requiring BUFFER OR INVERTER BASED PERIPHERAL DRIVER interface ICs.
DS2482X-100+T
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 9; Package Code: VFBGA; Package Shape: RECTANGULAR;
PTPS1H000AQDGNRQ1
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Screening Level: AEC-Q100;
VNQ860SPTR-E
STMicroelectronics' VNQ860SPTR-E is a peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates within a power supply range of 8-36V and has a nominal output peak current limit of 0.7A. This small outline driver is ideal for applications requiring source flow direction in automotive systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MC07XSF517EK
Freescale Semiconductor
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 40; Moisture Sensitivity Level (MSL): 3; JESD-609 Code: e3; Terminal Finish: Matte Tin (Sn);
NXP Semiconductors
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 52; Maximum Operating Temperature: 125 Cel; Nominal Supply Voltage: 5 V; Surface Mount: YES;
MC07XS6517BEK
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 54; Package Code: HSSOP; Package Shape: RECTANGULAR;
MC07XS3200EK
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: SSOP; Package Shape: RECTANGULAR;
MC07XS3200EKR2
MC07XS6517DEK
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 52; Package Code: HSSOP; Package Shape: RECTANGULAR; Width: 7.5 mm;
MC07XS6517DEKR2
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 52; Package Code: HSSOP; Package Shape: RECTANGULAR; Turn-off Time: 120 us;
MC07XSC200EK
MC07XSC200EKR2
Peripheral Drivers; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: SSOP; Package Shape: RECTANGULAR;
MC07XSF517BEK
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Finish: Tin (Sn); Maximum Time At Peak Reflow Temperature (s): 40; Moisture Sensitivity Level (MSL): 3; JESD-609 Code: e3; Peak Reflow Temperature (C): 260;
MC07XSF517BEKR2
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 40; Moisture Sensitivity Level (MSL): 3; Terminal Finish: Tin (Sn);
MC07XSF517EKR2
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 52; Maximum Time At Peak Reflow Temperature (s): 40; Package Body Material: PLASTIC/EPOXY; Power Supplies (V): 5;
MC07XSG517DEK
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Moisture Sensitivity Level (MSL): 3; Maximum Time At Peak Reflow Temperature (s): 40; Peak Reflow Temperature (C): 260;
MC07XSG517DEKR2
BUFFER OR INVERTER BASED PERIPHERAL DRIVER;
MC07XSG517EK
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Finish: TIN; Maximum Time At Peak Reflow Temperature (s): 40; Moisture Sensitivity Level (MSL): 3; JESD-609 Code: e3; Peak Reflow Temperature (C): 260;
MC07XSG517EKR2
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Finish: TIN; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 40; JESD-609 Code: e3;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved