Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NTE3047 by Nte Electronics is a SINGLE TRIAC OUTPUT OPTOCOUPLER with 0.06A max forward current, 8mA trigger current, and 7500V isolation voltage. It operates b/w -55°C to 100°C, making it ideal for applications requiring high isolation and precise triggering in various electronic circuits.
Median Price
$2.470
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Master Electronics
1+ parts
100+ parts
$1.910
1k+ parts
$1.620
10k+ parts
$1.530
Nova Conductors
$1.339
-
Electro Sonic
$2.550
$1.970
$1.670
$1.580
TME
$3.100
$1.550
DigiKey Marketplace
$3.130
$2.600
Hutch & Son
Vyrian
Electronic Expediters
American Microsemiconductor Inc.
PC Components Company LLC
Bristol Electronics
Sensible Micro Corp
Advanced Electronics
$0.310
$0.282
$0.254
Argo Parts USA
Continental Prestige Electronics
$1.312
AZTECH Wire
$17.129
Netroflash
$1.272
$1.245
This single configuration makes the product easy to set up and use in various applications.
With a maximum forward current of 0.06 A, this device can handle high current applications efficiently.
The TRIAC output optocoupler type ensures reliable triggering and control of connected devices.
The high maximum operating temperature of 100°C allows the device to withstand heat in industrial environments.
The low minimum operating temperature of -55°C enables the device to function in cold conditions without any issues.
The low nominal input trigger current of 8 mA ensures efficient and precise triggering of the device.
With a minimum peak off-state voltage of 250 V, this product offers reliable isolation for safety and protection.
The high maximum isolation voltage of 7500 V provides excellent protection against electrical hazards and ensures safe operation.
Optocoupler Trigger Device Outputs NTE3047 attributes and parameters. Explore more Optocoupler Trigger Device Outputs devices from Nte Electronics
Configuration:
Maximum Forward Current:
Nominal Input Trigger Current:
Maximum Isolation Voltage:
No. of Elements:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Minimum Peak Off-state Voltage:
NTE3047 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
Founded in New Jersey in 1979, NTE Electronics, Inc has grown from a small-town supplier with ten semiconductors in its entire line to the largest aftermarket semiconductor supplier in the industry. Today, our product line consists of over 23,000 devices. Included in this offering is NTE Brand Semiconductors. In January 2001 NTE acquired the assets of the ECG division of Philips N.A. With this addition, NTE became the industry leader in supplying private label aftermarket electronic components to the Industrial, Commercial, Consumer, and MRO marketplace. NTE is a Master Distributor for some of the industry's major manufacturers of electronic components and accessories. NTE's 40,000 square foot headquarters in Bloomfield, NJ houses, under one roof, all the essential services and inventory to continually supply electronic components to its worldwide network of authorized distributors. NTE's warehouse maintains a large inventory of each device to ensure a 98% fill rate and an average 24-hour shipping time. NTE devices are quality tested to consistently assure that they meet or exceed the industry specifications of the device they are replacing. They have been used in NASA space projects, German automobiles, hospital/medical applications and in virtually every type of consumer item. NTE's global network of distributors extends across the United States, Canada, Latin America, the Caribbean and 35 other countries throughout the world. No matter how you measure success, NTE Electronics, Inc has become the leader in the replacement electronic component industry.
LL4148
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
1N4148
Excel (Suzhou) Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
SPC TECHNOLOGY/ MULTICOMP
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
DP83848IVVX/NOPB
National Semiconductor
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
LM358N
Taejin Technology
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
MBR1560CT
General Instrument
MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.
M39029/58360
Souriau
CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; Tool Settings: M22520/2-09; Terminal Type: CRIMP; MIL Conformity: YES; Mating Contacts: M39029/56348;
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
MMSZ5245BT1G
Onsemi
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
SMBJ18CA
Fagor Electronica S Coop
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
OPA2277UA/2K5E4
Texas Instruments
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
International Devices
1N4148WS
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
2N7002-7-F
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; Package Shape: RECTANGULAR;
SS14
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 150 Cel; Maximum Repetitive Peak Reverse Voltage: 60 V; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 150 A;
PIC18F4550T-I/PT
Microchip Technology
The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.
Taiwan Semiconductor
FODM3052R2
FODM3052R2 by Onsemi is a single TRIAC output optocoupler with a max on-state voltage of 3V and forward current of 0.06A. It operates b/w -40 °C to 100°C, has an isolation voltage of 3750V, and is ideal for applications requiring optocoupler trigger device outputs in surface mount configurations.
MOC3042SVM
MOC3042SVM by Onsemi is a single TRIAC output optocoupler with 3V max on-state voltage and 1A peak surge current. Ideal for triggering devices, it operates b/w -40 to 85 °C, offers 7500V isolation voltage, and has a surface mount feature for easy installation in various applications.
MOC3081SR2VM
Fairchild Semiconductor
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Repetitive Off-state Voltage (Peak): 800 V; Maximum Isolation Voltage: 7500 V; Configuration: SINGLE;
IL4218-X016
Infineon Technologies
TRIAC OUTPUT OPTOCOUPLER; Additional Features: HIGH SENSITIVITY, UL APPROVED; Minimum Peak Off-state Voltage: 800 V; No. of Elements: 1; Maximum Isolation Voltage: 5300 V; Nominal Input Trigger Current: .7 mA;
BRT13H
Vishay Intertechnology
The Vishay Intertechnology BRT13H is a TRIAC output optocoupler with a max on-state voltage of 2.3V and peak surge current of 3A. It operates b/w -40°C to 100°C, has an isolation voltage of 5300V, and is ideal for triggering devices in various applications requiring through-hole mounting.
VO4258M
VO4258M by Vishay Intertechnology is a single TRIAC output optocoupler with max operating temp of 100°C. It features 800V peak repetitive off-state voltage and 5300V isolation voltage. Ideal for applications requiring optoelectronic triggering in environments ranging from -40°C to 100°C.
IL4117-X007
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Minimum Operating Temperature: -55 Cel; Maximum Isolation Voltage: 5300 V; Minimum Peak Off-state Voltage: 700 V; No. of Elements: 1; Additional Features: HIGH SENSITIVITY, UL APPROVED;
IL4218-X001
Vishay Semiconductors
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Additional Features: UL RECOGNIZED, VDE APPROVED; Maximum On State Current: .3 A; Maximum Forward Current: .06 A; Configuration: SINGLE;
TLP268J(TPL,E(T
Toshiba
Toshiba's TLP268J(TPL,E(T is a single optocoupler with peak surge current of 1.2A and max forward current of 0.0075A. Ideal for applications requiring TRIAC output, it offers max isolation voltage of 3750V and operates b/w -25 to 85°C, making it suitable for surface mount configurations.
TLP266J
Toshiba TLP266J is a single optocoupler with peak surge current of 1.2A and max forward current of 0.025A. Ideal for triggering devices, it features a triac output with zero cross voltage, operating b/w -25°C to 85°C. With a max isolation voltage of 3750V, it's suitable for surface mount applications requiring high on-state current at 0.07A.
MOC3061M
The Onsemi MOC3061M is a single TRIAC output optocoupler with 3V max on-state voltage and 1A peak surge current. Operating from -40 to 85°C, it offers 600V repetitive off-state voltage and 7500V isolation for industrial control applications. Ideal for triggering devices with low forward and input trigger currents of 0.06A and 0.015A respectively.
MOC3081
Motorola
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .06 A; Peak Surge Current: 1 A; No. of Elements: 1;
50034
Murrelektronik
The Murrelektronik 50034 is a single optocoupler trigger device with a max forward current of 0.01 A and isolation voltage of 6000 V. Ideal for panel mounting, it operates b/w -20°C to 60°C, making it suitable for applications requiring reliable TRIAC output optocouplers.
VO3053-X007T
VO3053-X007T by Vishay Intertechnology is a single optocoupler with peak surge current of 1A, max forward current of 0.06A, and max operating temp of 100°C. Ideal for triggering devices in applications requiring high isolation voltage up to 4420V, such as industrial control systems and power supplies.
ASO242R
Crydom
The Crydom ASO242R is a SINGLE SCR OUTPUT OPTOCOUPLER with 2500V isolation voltage. Operating temperature ranges from -30°C to 80°C, making it suitable for various trigger device output applications. Its Tin (Sn) finish with Nickel (Ni) barrier ensures reliable performance in demanding environments.
IL4217-X007
Siemens
TRIAC OUTPUT OPTOCOUPLER; Nominal Input Trigger Current: .7 mA; Configuration: SINGLE; Minimum Peak Off-state Voltage: 700 V; Additional Features: HIGH SENSITIVITY, UL APPROVED; Minimum Operating Temperature: -55 Cel;
FOD420
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Minimum Peak Off-state Voltage: 600 V; Nominal Input Trigger Current: .75 mA; Maximum Operating Temperature: 100 Cel; Maximum Isolation Voltage: 5000 V;
MOC3051SR2VM
The Onsemi MOC3051SR2VM is a single optocoupler with a max on-state voltage of 2.5V and peak surge current of 1A. It operates b/w -40 to 85°C, has an isolation voltage of 7500V, and is ideal for triggering devices in various applications.
NTE3047
Nte Electronics
MOC3020SM
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Nominal Input Trigger Current: 30 mA; Maximum Input Trigger Current: .03 A; Minimum Operating Temperature: -40 Cel;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NTE3048
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 100 Cel; Nominal Input Trigger Current: 8 mA; Configuration: SINGLE; Maximum Forward Current: .06 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved