Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 766; Approvals (V): UL; Turns Ratio (Np:Ns): 1:1; Length: 12.7 mm;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Pulse & Datacom Transformers 76601/3 attributes and parameters. Explore more Pulse & Datacom Transformers devices from Newport Components
Application:
Approvals (V):
Minimum ET Product:
Height:
Isolation Voltage:
Length:
Manufacturer Series:
Mounting Feature:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Inductance (Primary):
Transformer Type:
Turns Ratio (Np:Ns):
Width:
76601/3 Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Newport Components - C and D Technologies - Murata PS Company Overview Newport Components was acquired by C&D Technologies December 2000. C&D Technologies, Inc. is a technology company that produces and markets systems for the power conversion and storage of electrical power, including industrial batteries and electronics. This specialized focus has established the company as a leading and valued supplier of products in three major categories - reserve power systems, electronic power supplies and material handling systems. C&D's success in these key markets has been supported by dedication to customer service. Approximately 70 percent of the company's current sales are reserve power systems supplied to leading operators of telecommunications, data transmission, infrastructure computer systems and utilities to enable them to maintain critical operations during power outages. The Power division of C&D Technologies was acquired by Murata Power Solutions in 2007.
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
SMBJ18CA
Db Lectro
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRS1100T3G
Onsemi
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
BAV99
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Shanghai Lunsure Electronic Technology
MMBF170LT1G
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
IRLML6402TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
LL4148
Semtech Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358AN
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
MBR130T1G
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
1N4148
Hy Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FDN306P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
MMSZ5245BT1G
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
CL31B104KBCNNNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.
Rectron
H1197NL
Pulse Electronics
H1197NL by Pulse Electronics is a Datacom Transformer with 1500V isolation voltage. It is designed for 10/100 BASE-TX Ethernet applications, featuring dimensions of L12.70xB6.73xH5.97 mm and matte tin terminal finish. Operating temperature ranges from 0 to 70°C, suitable for surface mount installations in various networking setups.
96046123229
Littelfuse
POWER TRANSFORMER; Mounting Feature: SURFACE MOUNT; Width: 13.5 mm; No. of Functions: 2; Length: 14 mm; Isolation Voltage: 1875 V;
8241
Api Technologies
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Turns Ratio (Np:Ns): 1.414:1; 1:1; Length: 25.53 mm; No. of Functions: 1; Isolation Voltage: 1500 V;
S5394-CLD
Coilcraft
Coilcraft's S5394-CLD is a pulse transformer with 1500V isolation voltage, 400uH primary inductance, and 32 V-us min ET product. Ideal for gate drive applications, this surface mount transformer operates b/w -40 to 85°C with a compact size of L6.99xB6.6xH5.46 mm.
750311771
Wuerth Elektronik & Kg
750311771 by Wurth Elektronik is a Datacom Transformer with 2000V isolation voltage, 400uH inductance, and 6:1 turns ratio. Ideal for surface mount applications in pulse and data communication systems due to its compact dimensions of L32.31xB27.03xH13.69 (mm).
Q1553-22
Pulse Specialty Components
DATACOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: Q1553-22; Maximum Operating Temperature: 130 Cel; Application: GENERAL PURPOSE; Width: 8.89 mm;
824-00274
E & E Magnetic Products
E & E Magnetic Products' 824-00274 is a Pulse & Datacom Transformer with Isolation Voltage of 1500V, Inductance (Primary) of 350uH, and Dimensions L25.4xB12.7xH5.97 (mm). Ideal for 10/1000 BASE-T applications, it operates b/w -40°C to +85°C temperature range and features Surface mounting method.
HX1234NL
HX1234NL by Pulse Electronics is a DATACOM TRANSFORMER with 1CT:1CT Turns Ratio, 1500V Isolation Voltage, and 1dB Insertion Loss. It is designed for 10/100 BASE-TX applications, operates b/w -40 to 85 °C, and has dimensions of L28.58xB12.19xH7.11 mm for surface mount assembly.
749020111A
Wurth Elektronik's 749020111A is a DATACOM TRANSFORMER with 1:1 Turns Ratio, 1500V Isolation Voltage, and 1dB Insertion Loss. It is designed for applications like 1000 BASE-T Ethernet networks, featuring Tin (Sn) over Copper (Cu) Terminal Finish and Surface mounting Feature.
8619
DATACOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Width: 8.89 mm; Application: ISOLATION; Height: 5.84 mm; Length: 12.7 mm;
M21038/27-05
Pico Electronics
DATACOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; No. of Functions: 1; Height: 6.35 mm; Length: 13.208 mm; Application: GENERAL PURPOSE;
PM-DB2762
Premier Magnetics
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): MIL-STD-1553; Length: 10.16 mm; Turns Ratio (Np:Ns): 1:2.5; Height: 8.128 mm;
96046323369
POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): IEC; Length: 14.5 mm; Height: 13.5 mm; Isolation Voltage: 1875 V;
8447
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Length: 14.81 mm; Height: 5.84 mm; No. of Functions: 1; Inductance (Primary): 350 uH;
22100
Schott Magnetics
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Width: 8.89 mm; Height: 6.35 mm; Turns Ratio (Np:Ns): 1:1:1:1; Inductance (Primary): 2000 uH;
96046323299
POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Minimum Operating Temperature: -40 Cel; Packing Method: TRAY; Width: 14 mm; Length: 14.5 mm;
8461
8461 by Api Technologies is a DATACOM TRANSFORMER with 2 functions and an isolation voltage of 1500 V. With primary inductance of 350 uH, it is ideal for applications such as 10/100 BASE-TX LAN networks. This surface mount transformer has dimensions of L28.57 x W16.26 x H5.84 mm, making it suitable for compact electronic devices.
M21038/27-07
Inrcore
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): MIL-PRF-21038/27E; Minimum Operating Temperature: -55 Cel; Width: 8.89 mm; Application: GENERAL PURPOSE;
DA2318-ALC
Coilcraft's DA2318-ALC is a pulse transformer with 1500V isolation voltage, 680uH inductance, and 40.8 V-us min ET product. Ideal for gate drive applications, it operates b/w -40 to 125 °C with a frequency range of 50 KHz to 2000 KHz.
HM5149NLT
HM5149NLT by Pulse Electronics is a DATACOM TRANSFORMER with 4 functions and an isolation voltage of 1500V. With inductance of 360uH, it operates b/w -40 to 125 °C, making it ideal for AEC-Q200 approved applications requiring high performance in a compact form factor.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Newport Components
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved