Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 10; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Input Voltage Absolute: 6.5 V; Maximum Voltage Tolerance: 3.75 %;
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Euro-Tech
Anansix
Digiode
One Stop Electronics
$5.500
Parana Technologies
$6.786
$7.438
DigiPath Technology Company
$7.472
$6.875
ChromeModa Solutions
$7.625
$6.252
IDEA Electronic Components Group
$6.862
AZTECH Wire
$10.017
Corphita
Microchip USA
Fixed Regulators - Positive Multiple Output LDO LP3996SD-2828 attributes and parameters. Explore more Fixed Regulators - Positive Multiple Output LDO devices from National Semiconductor
Adjustability:
Maximum Dropout Voltage-1:
Nominal Dropout Voltage-1:
Maximum Dropout Voltage-2:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Line Regulation:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current-1:
Maximum Output Current-2:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Maximum Output Voltage-2:
Minimum Output Voltage-2:
Nominal Output Voltage-2:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Voltage Tolerance:
Width:
LP3996SD-2828 Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
2N2222A
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
1N4148WT
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/56-351
Amphenol
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;
1N4148
Digitron Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
M39029/58-360
Molex
CONNECTOR ACCESSORY; Alternate Contact Sources: MILITARY; Removal Tool Sources: MILITARY; Material: COPPER ALLOY; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354;
Rectron
1N5819HW-7-F
Diodes Incorporated
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
Microchip Technology
M24308/2-1F
Cinch Connectivity Solutions
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Body Depth: .375 inch;
BSS138W-7-F
Multicomp Pro
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;
Surge Components
USB3320C-EZK-TR
Microchip Technology's USB3320C-EZK-TR is a Bus Controller IC with 32 terminals, operating at 1.6-2V. It supports USB bus compatibility, clock frequency up to 60MHz, and CMOS technology. Ideal for applications requiring Universal Serial Bus peripherals in compact designs with low power consumption.
North American Philips Discrete Products Div
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Onsemi
MMBT3906LT1G
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
SMBJ18CA
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
TPS71247DRC
Texas Instruments
TPS71247DRC by Texas Instruments is a fixed positive multiple output LDO regulator with 2 outputs. It has a max dropout voltage of 0.21 V and can handle an operating temperature range from -40 to 125°C. This regulator is suitable for applications requiring precise voltage regulation in compact electronic devices.
TPS71257DRCTG4
TPS71257DRCTG4 by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 2.85V nominal output voltage, 0.23V max dropout voltage, and 0.25A max output current per channel. It is suitable for applications requiring stable power supplies in compact spaces, such as portable electronic devices or IoT sensors.
MAX8559EBAK2-T
Analog Devices
Analog Devices' MAX8559EBAK2-T is a BICMOS technology-based LDO regulator with 2 outputs. It offers fixed output voltages of 1.8V and 2.8V, with a max dropout voltage of 0.12V. Ideal for applications requiring precise voltage regulation in compact electronic devices.
TLV7113025DSER
TLV7113025DSER by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 2.5V and 3V nominal output voltages, ideal for applications requiring low dropout voltage of 0.215V to 0.25V. This CMOS technology regulator has dual terminals, operates b/w -40°C to 125°C, and offers excellent load regulation of 0.015%.
CS8164YTHA5
CS8164YTHA5 by Onsemi is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It has a Max Dropout Voltage of 0.7V and 0.6V, suitable for applications requiring stable voltage regulation in temperature-sensitive environments. With a package style of Flange Mount and through-hole terminal form, it is ideal for various electronic devices needing precise power management.
TPS71921-22DRVT
TPS71921-22DRVT by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It has a max dropout voltage of 0.4 V, operating temperature range from -40 to 125 °C, and can handle a max input voltage of 7 V. Ideal for applications requiring stable power supply in compact spaces.
TPS70151PWPG4
TPS70151PWPG4 by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It offers a Max Dropout Voltage of 0.275 V, operating temperature range from -40 to 125°C, and a max output current of 0.5 A. Ideal for applications requiring stable voltage regulation in compact designs.
AP7312-1828FM-7
AP7312-1828FM-7 by Diodes Inc. is a fixed positive multiple output LDO regulator with 2 outputs. It has a max dropout voltage of 0.3V, operating temperature range from -40 to 125°C, and can handle up to 0.15A output current per channel. Ideal for applications requiring stable voltage regulation in compact spaces.
CAT6221-MGTD-GT3
CAT6221-MGTD-GT3 by Onsemi is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It has a Max Dropout Voltage of 0.35 V, operating temperature range from -40 to 125 °C, and a package style of Small Outline, Very Thin Profile. Ideal for applications requiring precise voltage regulation in compact spaces.
AP7312-1525FM-7
AP7312-1525FM-7 by Diodes Inc. is a fixed positive multiple output LDO regulator with 2 outputs. It has a max dropout voltage of 0.3V and 0.2V, operating temperature range from -40 to 125°C, and can handle up to 0.15A output current per channel. Ideal for applications requiring stable voltage regulation in compact spaces like portable electronics or IoT devices.
ADP221ACBZ-2828-R7
Analog Devices' ADP221ACBZ-2828-R7 is a PMOS technology-based LDO regulator with 2 outputs. It offers fixed output voltages of 2.8V and has a max dropout voltage of 0.23V, making it ideal for applications requiring precise voltage regulation in compact electronic devices.
ADP3304AR-3.3
ADP3304AR-3.3 by Analog Devices is a fixed positive multiple output LDO regulator with 3.3V nominal output voltage and 1% max voltage tolerance. It has a small outline package style, Gull Wing terminal form, and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring stable power supply with dual outputs in compact electronic devices.
TPS70251PWPRG4
TPS70251PWPRG4 by Texas Instruments is a PMOS technology-based LDO regulator with 2 outputs. It offers a max dropout voltage of 0.275 V and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring fixed positive multiple output regulation in compact designs.
TPS70351PWP
TPS70351PWP by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 3.3V and 1.8V outputs, ideal for applications requiring low dropout voltages of 0.25V. It features a small outline package with gull wing terminals, operating temperature range from -40 to 125°C, and max output currents of 1A and 2A for versatile power management solutions in compact designs.
LP3996SDX-1833/NOPB
LP3996SDX-1833/NOPB by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It offers a Max Dropout Voltage of 0.55V and 0.22V, suitable for applications requiring stable voltage regulation in tight spaces. Operating temperature range from -40°C to 125°C makes it ideal for various electronic devices.
NCV8154MW280120TBG
NCV8154MW280120TBG by Onsemi is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It has a Max Dropout Voltage of 0.29 V and operates in temperatures ranging from -40 to 125 °C. Ideal for applications requiring precise voltage regulation in automotive electronics and industrial control systems.
TLV7111333DDSER
TLV7111333DDSER by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It offers a Nominal Output Voltage of 1.3 V and Max Dropout Voltage of 0.2 V, suitable for applications requiring stable voltage regulation in compact electronic devices. Operating temperature ranges from -40 to 125 °C.
TLE4473GV53AUMA2
Infineon Technologies
TLE4473GV53AUMA2 by Infineon Technologies is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It has a Nominal Output Voltage-1 of 3.3 V and Max Dropout Voltage-2 of 0.6 V, suitable for applications requiring stable voltage regulation in compact spaces like automotive electronics.
LP8900TLX-3333/NOPB
Texas Instruments LP8900TLX-3333/NOPB is a Fixed Positive Multiple Output LDO Regulator with 2.8V nominal output voltage, 0.164V max dropout voltage, and 0.2A max output current per channel. Ideal for applications requiring low power consumption in compact electronic devices.
TPS71812-33DRVRG4
TPS71812-33DRVRG4 by Texas Instruments is a BICMOS technology-based LDO regulator with 2 outputs. It has a max dropout voltage of 0.4 V, operating temperature range from -40 to 125 °C, and can handle up to 0.2 A output current per channel. Ideal for applications requiring fixed positive multiple output regulation in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved