Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Load Regulation (%): .4 %;
Median Price
$1.890
Lifecycle Status
Suppliers In-Stock
28
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
1k+ parts
10k+ parts
DF Sales Co.
Nova Conductors
$2.507
Vyrian
Digiode
Anansix
Electro Mavin
Prism Electronics
Sensible Micro Corp
Bristol Electronics
Rebound Electronics
Chip Stock
Lantek
MISTER SPROCKETS
Atlantic Semiconductor
Electronic Expediters
A&K Electronics
Q Components
EMSNET
Elcom Components
Electronics Depot
Dark Horse Electronics
LittleDiode
J & M Industries LLC
PC Components Company LLC
Semtec, LLC
ACDS - Activité Composants Distribution Service
Semicontronic
$2.500
$2.438
$2.425
Continental Prestige Electronics
$2.456
Argo Parts USA
Netroflash
Corohmni
$2.674
Advanced Electronics
$2.754
$2.617
Ampacity Inc.
$5.500
Parana Technologies
$8.326
$8.949
DigiPath Technology Company
$9.168
$8.434
ChromeModa Solutions
$9.355
$7.671
IDEA Electronic Components Group
$8.887
$8.420
AZTECH Wire
$9.692
Microchip USA
$28.750
$28.330
$28.130
$27.920
Component Stockers USA
$99.990
Metaverse IC Inc.
QUARKTWIN TECHNOLOGY LTD
Kepictronics
Lixinc
Assy Fe
A-Z Elektronik GmbH
Corphita
Perfect Parts
Alle Elektronik GmbH
Authorized Procurement Solutions
GreenTree Electronics
Robosynatics
Lucentia Tech
Adjustable Regulators - Positive Single Output LDO LM1084IS-ADJ attributes and parameters. Explore more Adjustable Regulators - Positive Single Output LDO devices from National Semiconductor
Adjustability:
Maximum Dropout Voltage-1:
Nominal Dropout Voltage-1:
Maximum Input-Output Voltage Differential:
Minimum Input-Output Voltage Differential:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Line Regulation (%/V):
Maximum Load Regulation (%):
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
LM1084IS-ADJ Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
SMBJ18CA
Goodwork Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT-7
Diodes Incorporated
1N4148WT-7 by Diodes Inc. is a fast recovery rectifier diode with a max reverse recovery time of 0.004 us and a max forward voltage of 1.25 V. It has a package style of small outline, making it suitable for surface mount applications where high-speed switching is required at temperatures ranging from -65 to 150 °C.
1N4148
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
Renesas Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
EU2B-YS2J03F
Idec
ROTARY SWITCH;
LM555CM
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ATMEGA328P-AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
LM107H
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
1N4148WS
Synsemi
Microchip Technology
BAV99
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
PIC18F4550-I/ML
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
SS14
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Micro Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM358M
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
TPS71501MDCKREP
Texas Instruments
TPS71501MDCKREP by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 15V and a max dropout voltage of 0.75V, suitable for applications requiring precise voltage regulation in compact spaces. Operating temperature ranges from -55°C to 125°C, making it versatile for various environments. This regulator features a small outline package style and surface mount capability for easy integration into electronic designs.
LT3012BEFE
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 16; Package Code: HTSSOP; Terminal Form: GULL WING; Operating Temperature (TJ-Min): -40 Cel; Terminal Pitch: .65 mm;
MIC29302BUT&R
Micrel
MIC29302BUT&R by Micrel is an adjustable positive single output LDO regulator with a max output current of 3A and a max dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
LT3080EDD#TRPBF
Analog Devices
LT3080EDD#TRPBF by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 1.1A and a max dropout voltage of 0.5V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
MIC5219YM5-TR
MIC5219YM5-TR by Microchip is an adjustable positive single output LDO regulator with a max dropout voltage of 0.6V and load regulation of 0.7%. It is designed for applications requiring precise voltage regulation in a compact package, suitable for surface mount assembly at temperatures ranging from -40 to 125°C.
LT3010HMS8E#PBF
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: HTSSOP; Terminal Form: GULL WING; Package Equivalence Code: TSSOP8,.19; Package Style (Meter): SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH;
LT3060IDC#TRMPBF
LT3060IDC#TRMPBF by Analog Devices is an adjustable positive single output LDO regulator with a max output voltage of 44.5V and a dropout voltage of 0.51V. This surface-mount device, operating from -40 to 125°C, is ideal for applications requiring precise voltage regulation in compact spaces.
MIC29502WU-TR
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TO-263; Terminal Form: GULL WING; Terminal Pitch: 1.702 mm; Operating Temperature (TJ-Max): 125 Cel;
ADM7151ARDZ-02-R7
ADM7151ARDZ-02-R7 by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 0.8A and a min output voltage of 1.5V. It is commonly used in applications requiring stable voltage regulation, such as power management in electronic devices.
LT1761ES5-SD#PBF
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: VSSOP; Terminal Form: GULL WING; No. of Functions: 1; Width: 1.625 mm;
TPS73601DRBR
TPS73601DRBR by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 0.4A and a max dropout voltage of 0.2V, suitable for applications requiring precise voltage regulation in compact spaces. Operating temperature ranges from -40 to 125°C, making it ideal for various electronic devices where space and thermal management are critical factors. The package style is small outline with very thin profile, ensuring versatility in design integration while maintaining high performance standards.
TPS73601DBVTG4
TPS73601DBVTG4 by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 0.4A and a max dropout voltage of 0.2V, making it ideal for applications requiring precise voltage regulation in tight spaces. With a wide operating temperature range from -40°C to 125°C and a small outline package style, this regulator is suitable for various electronic devices where space and temperature constraints are critical.
MIC61300YMME-TR
MIC61300YMME-TR by Microchip is an adjustable positive single output LDO regulator with a max output current of 3A and dropout voltage of 0.35V. It comes in a small outline package suitable for surface mount applications, offering precise voltage regulation for various electronic devices.
MIC29302WT
MIC29302WT by Microchip Tech is an adjustable positive single output LDO regulator with max output voltage of 25V and current of 3A. It has a low dropout voltage of 0.37V, making it suitable for applications requiring precise voltage regulation in temperature-sensitive environments. The device comes in a rectangular package style with through-hole terminals, ideal for flange mount configurations.
LT1965EMS8E#TRPBF
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: HTSSOP; Terminal Form: GULL WING; Terminal Pitch: .65 mm; Nominal Dropout Voltage-1: .29 V;
LT3065EDD#PBF
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 10; Package Code: HVSON; Terminal Form: NO LEAD; Qualification Status: Not Qualified; Terminal Pitch: .5 mm;
TPS74801DRCT
TPS74801DRCT by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 1.5A and a max input voltage of 5.5V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
MAX8556ETE+
Maxim Integrated
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 16; Package Code: HVQCCN; Terminal Form: NO LEAD; Minimum Operating Temperature: -40 Cel; Maximum Output Current-1: 4 A;
LT3045IDD#PBF
LT3045IDD#PBF by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 0.5A and a max dropout voltage of 0.45V. It is designed for applications requiring precise voltage regulation in compact spaces, featuring a small outline package style and dual terminal position for surface mount assembly.
LT3080EMS8E-1#PBF
Analog Devices' LT3080EMS8E-1#PBF is an adjustable positive single output LDO regulator with a max output voltage of 36V and a dropout voltage of 0.5V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LM1084IT-ADJ/NOPB
LM1084IT-ADJ/NOPB by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 5.5A and a max input-output voltage differential of 25V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits.
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): -40 Cel; Terminal Pitch: 2.54 mm; Technology: BIPOLAR;
LM1085IT-ADJ/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Terminal Pitch: 2.54 mm; Maximum Line Regulation (%/V): .2; Moisture Sensitivity Level (MSL): 1;
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: SFM; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 4 %; Terminal Position: SINGLE;
LM1085IS-ADJ/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Maximum Time At Peak Reflow Temperature (s): 30; Minimum Output Voltage-1: 1.2 V;
LM1085IS-ADJ/NOPB by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 3A. It has a max dropout voltage of 1.5V and can operate in temperatures ranging from -40°C to 125°C. This regulator is commonly used in applications that require precise voltage regulation, such as power supplies and battery charging circuits.
LM1086IS-ADJ/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2 %; Maximum Input-Output Voltage Differential: 15 V;
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; JESD-609 Code: e3; Width: 8.635 mm;
LM1086ISX-ADJ/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input-Output Voltage Differential: 15 V; Minimum Output Voltage-1: 1.2 V;
LM1086ISX-ADJ/NOPB by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 1.5A and a dropout voltage of 1.3V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices.
LM1084IS-ADJ/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Maximum Voltage Tolerance: 1.5 %; Terminal Pitch: 2.54 mm;
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Maximum Line Regulation (%/V): .01; No. of Functions: 1;
LM1085ISX-ADJ/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Maximum Voltage Tolerance: 4 %; Terminal Position: SINGLE;
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Package Style (Meter): SMALL OUTLINE; Width: 8.635 mm;
LM1086CSX-ADJ/NOPB
LM1086CSX-ADJ/NOPB by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 1.5A and a dropout voltage of 1.3V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline, surface mountable, and has a moisture sensitivity level of 3.
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Operating Temperature (TJ-Max): 125 Cel; Terminal Pitch: 2.54 mm;
LM1086CS-ADJ/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Operating Temperature (TJ-Min): 0 Cel; Package Shape: RECTANGULAR;
LM1086CS-ADJ/NOPB by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 1.5A and a dropout voltage of 1.3V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LM1084ISX-ADJ/NOPB
LM1084ISX-ADJ/NOPB by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 5.5A and a max input voltage of 29V. It features a small outline package style, matte tin terminal finish, and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring precise voltage regulation in compact electronic devices.
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Package Body Material: PLASTIC/EPOXY; Moisture Sensitivity Level (MSL): 3;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved