Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LINE RECEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
Median Price
$2.090
Lifecycle Status
Suppliers In-Stock
26
In-Stock Inventory
1k+
Rochester
1+ parts
$0.870
100+ parts
$0.850
1k+ parts
$0.840
10k+ parts
-
Chip1Stop
$0.928
Farnell
$1.560
$1.060
$0.811
$0.720
Texas Instruments
$2.005
$1.656
$0.895
Newark
$1.420
$1.030
$0.921
Arrow
$2.605
$1.804
$1.495
$1.148
DigiKey
$2.670
$1.723
$1.485
$1.369
Mouser Electronics
$1.590
$1.480
$1.360
RS (Exports)
$2.140
$1.891
Verical
Nova Conductors
$1.376
Digiode
$1.905
TME
$2.300
$1.570
Chip Stock
Vyrian
Anansix
Bristol Electronics
Inventory MP
CirComp Electronics, Inc.
Prism Electronics
LIBRA Elektronik GmbH
Holdelec - ElecDif-Pro
ACDS - Activité Composants Distribution Service
Sensible Micro Corp
NAC Semi
Atlantic Semiconductor
Argo Parts USA
Continental Prestige Electronics
$1.348
Bastille Electronics
$1.307
$1.242
$1.225
Modulus Dynamics
$1.527
$1.512
$1.466
Semicontronic
$1.530
$1.492
$1.484
Ampacity Inc.
Corphita
Component Stockers USA
$2.490
$1.650
$1.300
$1.160
Parana Technologies
$6.323
$7.072
DigiPath Technology Company
$6.963
$6.406
ChromeModa Solutions
$7.105
$5.826
IDEA Electronic Components Group
$6.394
Corohmni
$7.715
Perfect Parts
Authorized Procurement Solutions
CPlus Electronics
A-Z Elektronik GmbH
Lixinc
Glotronic Ltd.
Alle Elektronik GmbH
QUARKTWIN TECHNOLOGY LTD
GreenTree Electronics
Speed Components Ltd (Excess)
Metaverse IC Inc.
Line Drivers & Receivers DS34C86TM/NOPB attributes and parameters. Explore more Line Drivers & Receivers devices from National Semiconductor
Input Characteristics:
Interface IC Type:
Interface Standard:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Low Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Receive Delay:
Receiver No. of Bits:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
DS34C86TM/NOPB Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
CRCW080510R0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
SS14
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDC5614P
Onsemi
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
MBR1560CT
General Instrument
MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.
LL4148
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Shenzhen Socay Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRS1100T3G
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
CRCW04020000Z0ED
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM358AN
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Hy Electronic
BAV99
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Sensitron Semiconductor
Panjit International
BSS84-7-F
SPC TECHNOLOGY/ MULTICOMP
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;
M24308/2-1F
Defense Logistics Agency
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE AND PANEL; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Empty Shell: NO;
1N4148WT
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
FDLL4148
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
MAX485ESA-T
Maxim Integrated
MAX485ESA-T by Maxim Integrated is a CMOS line transceiver with 8 terminals, operating at 5V. It features EIA-422 and EIA-485 interface standards, with a max supply voltage of 5.25V and output polarity as complementary. Ideal for industrial applications requiring differential outputs and Schmitt trigger inputs.
SN65LBC179QDRG4
SN65LBC179QDRG4 by Texas Instruments is a Line Driver & Receiver with 5V supply voltage, 18ns transmit delay, and -40 to 125°C operating temperature. Ideal for automotive applications, it features differential output, EIA-485/ISO 8482 interface standards, and Schmitt trigger input characteristics.
MAX3485ESA+
Analog Devices
MAX3485ESA+ by Analog Devices is a CMOS line transceiver with EIA-422 and EIA-485 interface standards. It operates at 3.3V, has 8 terminals, and offers differential outputs. With a max transmit delay of 35ns, it's ideal for industrial applications requiring high-speed data transmission in harsh environments.
DS26LV31TM/NOPB
National Semiconductor
LINE DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
MAX3232ECAE-T
MAX3232ECAE-T by Maxim Integrated is a Line Driver & Receiver with 16 terminals, operating at 3-5.5V. It features a small outline package and Schmitt trigger input characteristics. Ideal for EIA-232, TIA-232, V.24, and V.28 interface standards in commercial temperature grade applications.
NBA3N012CSNT1G
NBA3N012CSNT1G by Onsemi is a Line Receiver IC with 5 terminals, operating at 3.3V nominal voltage. It features a max receive delay of 3.5ns and interface standard EIA-644-A; TIA-644-A, making it ideal for automotive applications requiring fast signal processing in compact designs.
MAX3232EIDBR
MAX3232EIDBR by Texas Instruments is a Line Driver & Receiver with 16 terminals. It operates at 3.3/5V, has inverted output polarity, and supports EIA-232-F interface standard. Ideal for industrial applications requiring reliable data transmission in temperature range of -40 to 85°C.
ICL3232IBNZ-T
Renesas Electronics
Renesas Electronics' ICL3232IBNZ-T is a Line Transceiver with 2 functions, operating at -40 to 85°C. It supports EIA-232, TIA-232, V.24, and V.28 interfaces with Schmitt Trigger input characteristics. This small outline IC has a max supply voltage of 5.5V and is ideal for industrial applications requiring reliable communication over short distances.
MAX3232CDBR
MAX3232CDBR by Texas Instruments is a Line Driver & Receiver with 16 terminals. It operates at 3.3/5V, has a max supply voltage of 3.6V, and supports EIA-232-F interface standard. Ideal for applications requiring reliable data transmission in commercial temperature range from 0 to 70°C.
Intersil
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
FIN1104MTCX
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: TSSOP; Package Shape: RECTANGULAR;
DS10BR150TSDX/NOPB
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVQCCN; Package Shape: SQUARE;
ADV7611BSWZ-P
ADV7611BSWZ-P by Analog Devices is a 64-terminal line receiver with CMOS technology. It operates b/w -40 to 85 °C and has a supply voltage range of 1.71-1.89 V. Ideal for industrial applications, it features a compact square package with low profile and gull wing terminals.
MAX3232ECUP
MAX3232ECUP by Maxim Integrated is a Line Driver & Receiver with 3.3/5 V power supplies, 20 terminals, and EIA-232 interface standard. It operates b/w 0-70 °C and has a max output low current of 1.6 A. Ideal for applications requiring reliable communication in commercial temperature environments.
THVD1452DGSR
THVD1452DGSR by Texas Instruments is a line driver & receiver with a supply voltage range of 3-5.5V, operating temperature from -40 to 125°C, and differential output interface. It features a transmit delay of 20ns, receive delay of 40ns, and is ideal for automotive applications requiring EIA-485-A/TIA-485-A standard communication.
MAX3221EEAE+
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR;
MAX232CSE
Rochester Electronics
LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
MAX232EEPE+
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
MAX3485ECSA-T
MAX3485ECSA-T by Maxim Integrated is a Line Driver & Receiver with 3-3.6V supply voltage range, 35ns max transmit delay, and EIA-422/EIA-485 interface standard. Ideal for applications requiring differential output and Schmitt trigger input characteristics in commercial temperature grade environments.
MAX232ESE-T
MAX232ESE-T by Maxim Integrated is a Line Driver & Receiver with 2 functions, operating at 4.5-5.5V. It has a max transmit delay of 10000ns and output polarity is inverted. Widely used in industrial applications for EIA-232-E, TIA-232-E, V.28, and V.24 interface standards due to its CMOS technology and Schmitt trigger input characteristics.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DS34LV86TM/NOPB
DS34LV86TMX/NOPB
DS34LV86TMX/NOPB by Texas Instruments is a 16-terminal line driver with 3.6V supply voltage, operating b/w -40 to 85°C. It features EIA-422-B interface standard, differential output, and 4-bit receiver for industrial applications requiring high-speed data transmission.
DS34C86TMX/NOPB
DS34C87TMX/NOPB
DS34C87TMX/NOPB by Texas Instruments is a 4-function line driver with 5V supply, EIA-422 interface standard, and CMOS technology. It has a max transmit delay of 11ns and operates in industrial temperature range. Ideal for applications requiring high-speed data transmission over long distances.
DS34C86TM/NOPB
DS34LV86TMX
DS34C87TM/NOPB
DS34LV86TM
DS34C86TMX
DS34LV87TMX/NOPB
DS34LV87TMX/NOPB by Texas Instruments is a 4-bit line driver with 3.3V power supply, operating at industrial temperature range of -40 to 85°C. It features EIA-422-B, TIA-422-B, V.11 interface standard and offers differential output with true output polarity. Ideal for applications requiring high-speed data transmission in harsh environments.
DS34C86TM
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved