Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
UVPROM; Temperature Grade: COMMERCIAL; No. of Terminals: 28; Package Code: WDIP; Package Shape: RECTANGULAR; Maximum Standby Current: .0001 Amp;
Median Price
$17.150
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Forefront Electronics and Design
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Anansix
Digiode
Vyrian
MRC Electronics
Q Components
Sinequanon
Pride Electronics
Prism Electronics
Corphita
Montclair Electronics, Inc.
EPROM NMC27C64Q300 attributes and parameters. Explore more EPROM devices from National Semiconductor
Maximum Access Time:
Input/Output Type:
JESD-30 Code:
JESD-609 Code:
Memory Density:
Memory IC Type:
Memory Width:
No. of Functions:
No. of Terminals:
No. of Words:
No. of Words Code:
Operating Mode:
Maximum Operating Temperature:
Minimum Operating Temperature:
Organization:
Output Characteristics:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Parallel or Serial:
Power Supplies (V):
Programming Voltage (V):
Qualification:
Maximum Seated Height:
Maximum Standby Current:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage / Vsup (V):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
NMC27C64Q300 Memory ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.32.00.61
SB
8542.32.00.60
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
1N4148WS
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
LM317T
Micro Commercial Components
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;
SZNUP2105LT1G
Onsemi
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
1N4148
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
2N7002
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
350766-1
TE Connectivity
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
SN6505BDBVR
Texas Instruments
SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.
Jiangsu Changjiang Electronics Technology
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
Daco Semiconductor
EU2B-YS2J03F
Idec
ROTARY SWITCH;
LM107H/883C
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
FDN5618P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;
Lite-on Semiconductor
OPA2277UA/2K5
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
SMBJ18CA
Yageo
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M27C256B-70XF1
STMicroelectronics
STMicroelectronics M27C256B-70XF1 is a 32KX8 EPROM with 70ns access time, operating at 5V. It features a CMOS technology, 3-STATE output, and parallel interface. Commonly used in commercial applications requiring non-volatile memory storage.
TMS27C512-2JL
TMS27C512-2JL by Texas Instruments is a 64KX8 EPROM with 200ns access time, 5V supply voltage, and 3-STATE output. Commonly used in commercial applications, it features a CMOS technology, operates asynchronously, and has a memory density of 524288 bit.
M27C1001-15L1X
M27C1001-15L1X EPROM by STMicroelectronics features 128Kx8 organization, 120ns access time, and 3-state output characteristics. Commonly used in commercial applications, this CMOS technology chip operates at a nominal voltage of 5V with a max supply current of 30mA.
5962-8961403XA
STMicroelectronics' 5962-8961403XA is a MILITARY-grade EPROM with 128KX8 organization, CMOS technology, and 200 ns access time. It operates at 5V with 32 terminals in RECTANGULAR package for parallel applications.
5962-8766104XX
The Texas Instruments 5962-8766104XX is a MILITARY-grade EPROM with 16KX8 organization, 16384 words, and 131072 bit memory density. Operating in ASYNCHRONOUS mode with a supply voltage range of 4.5V to 5.5V, it offers fast access time of 170 ns. Ideal for military applications requiring reliable non-volatile memory solutions in harsh environments.
M27C1001-12XL1
M27C1001-12XL1 EPROM by STMicroelectronics features 128KX8 organization, 120 ns access time, and 1048576 bit memory density. Ideal for commercial applications, this CMOS technology chip operates at a temperature range of 0 to 70 °C with a supply voltage of 4.75V to 5.25V.
TMS27C210A-200JE
TMS27C210A-200JE by Texas Instruments is a 64KX16 EPROM with 3-STATE output, operating at 5V. It features a max access time of 200ns and is designed for industrial applications requiring reliable non-volatile memory storage in a ceramic, glass-sealed package.
TMS27C040-120JL
TMS27C040-120JL by Texas Instruments is a 512KX8 EPROM with 3-STATE output, operating at 5V. It has a max access time of 120ns and memory density of 4Mbit. Commonly used in commercial applications requiring fast data retrieval and storage in devices with parallel interfaces.
M27C1001-15L3X
M27C1001-15L3X EPROM by STMicroelectronics features 128KX8 organization, 120 ns access time, and 1048576 bit memory density. Ideal for automotive applications, it operates at temperatures ranging from -40 to 125 °C with a supply voltage of 4.5-5.5 V.
EPC2TI32N
Intel
EPC2TI32N by Intel is a 32-terminal EPROM with synchronous operation and 3-STATE output. It features a supply voltage of 3.3V, industrial temperature grade, and serial technology. Ideal for configuration memory applications due to its high memory density of 1695680 bits and compact flatpack design.
M27C512-20XF1
M27C512-20XF1 EPROM by STMicroelectronics features 64KX8 organization, 200ns access time, and 5V nominal voltage. Ideal for applications requiring reliable non-volatile memory storage in commercial temperature environments.
TMS27C020-12JE4
TMS27C020-12JE4 by Texas Instruments is a 256KX8 EPROM with 120 ns access time, operating at 5V. It features a CMOS technology, 3-STATE output, and INDUSTRIAL temperature grade. Ideal for applications requiring high memory density and fast data retrieval in industrial settings.
TMS27LV010A-30JL4
TMS27LV010A-30JL4 by Texas Instruments is a 128KX8 EPROM with 3.3V nominal voltage, operating in asynchronous mode. It features 300 ns max access time and is commonly used in commercial applications requiring reliable memory storage.
TMS27LV010A-30JE
TMS27LV010A-30JE by Texas Instruments is a 128KX8 EPROM with 3.3V nominal voltage, operating in asynchronous mode. It features 300 ns max access time and is commonly used in industrial applications requiring reliable non-volatile memory storage.
TMS27C128-15JL4
TMS27C128-15JL4 by Texas Instruments is a 16KX8 EPROM with 150 ns access time, 3-STATE output, and 5V supply voltage. It is used in commercial applications for storing data securely due to its UVPROM technology and through-hole terminal form.
5962-8961403MXA
STMicroelectronics' 5962-8961403MXA EPROM operates at 5V with 128KX8 organization, MIL-STD-883 screening level. Ideal for military applications, it offers 131072 words memory width, 1048576 bit density, and 200 ns access time.
TMS27C020-250JE4
TMS27C020-250JE4 by Texas Instruments is a 256KX8 EPROM with 250 ns access time, operating at 5V. It features 3-STATE output characteristics and uses CMOS technology. Ideal for industrial applications requiring reliable non-volatile memory storage in a compact IN-LINE package style.
TMS27C128-2JE4
TMS27C128-2JE4 by Texas Instruments is a 16KX8 EPROM with 3-STATE output, operating at 5V. It has an access time of 200ns and memory density of 131072 bits. Commonly used in industrial applications for parallel programming due to its CMOS technology and through-hole terminal form.
TMS27C020-10JL
TMS27C020-10JL by Texas Instruments is a 256KX8 EPROM with 100ns access time, operating at 5V. It features 3-STATE output and CMOS technology, suitable for commercial applications requiring high memory density and parallel operation. The package style is in-line, window with through-hole terminals, making it versatile for various electronic designs.
TMS27128T-25JL
TMS27128T-25JL by Texas Instruments is a 16KX8 EPROM with 131072 bit memory density and 250 ns max access time. It operates at temperatures b/w 0 to 70 °C, suitable for commercial applications requiring fast data retrieval in a 28-terminal IN-LINE package.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved