Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 7.5 V; Maximum Voltage Tolerance: 3.5 %;
Median Price
$3.080
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Component Electronics Inc.
1+ parts
100+ parts
$2.310
1k+ parts
$2.000
10k+ parts
-
Vyrian
Anansix
Digiode
Ashlea Components Ltd
Parana Technologies
$3.568
$4.090
DigiPath Technology Company
$3.929
$3.615
ChromeModa Solutions
$4.009
$3.287
IDEA Electronic Components Group
$3.608
One Stop Electronics
$9.500
AZTECH Wire
$17.208
Corphita
Fixed Regulators - Positive Multiple Output LDO LP2966IMM-3336 attributes and parameters. Explore more Fixed Regulators - Positive Multiple Output LDO devices from National Semiconductor
Adjustability:
Maximum Dropout Voltage-1:
Nominal Dropout Voltage-1:
Maximum Dropout Voltage-2:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Line Regulation:
Maximum Load Regulation:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Current-2:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Maximum Output Voltage-2:
Minimum Output Voltage-2:
Nominal Output Voltage-2:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Voltage Tolerance:
Width:
LP2966IMM-3336 Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
1N4148WS
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
KSZ9031RNXIC
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
LL4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2902037
Phoenix Contact
MODULAR TERMINAL BLOCK;
LM358AN
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BAV99
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358N
Texas Instruments
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
M39029/58-360
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
LM358M
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
SN6505BDBVR
SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.
Fairchild Semiconductor
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ULN2803ADWR
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
MMBT3904LT1G
Onsemi
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
Taitron Components
TPS70858PWPRG4
TPS70858PWPRG4 by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It offers a Nominal Output Voltage of 3.3V and Max Dropout Voltage of 0.14V, suitable for applications requiring stable power supply in compact designs. Operating within -40 to 125°C, it features a small outline package with Gull Wing terminals for surface mount assembly.
LP3986BLX-3131/NOPB
LP3986BLX-3131/NOPB by Texas Instruments is a fixed positive multiple output LDO regulator with 2 outputs. It has a max dropout voltage of 0.1 V, operating temperature range from -40 to 125°C, and a package style of grid array for applications requiring precise voltage regulation in compact spaces.
TPS71256DRC
TPS71256DRC by Texas Instruments is a fixed positive multiple output LDO regulator with 2.8V nominal output voltage and 0.21V max dropout voltage. It has a small outline package style, suitable for applications requiring dual outputs with up to 0.25A current capacity in a compact design.
LP3996SDX-3033/NOPB
LP3996SDX-3033/NOPB by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 3.3V and 3V nominal output voltages, 0.55V and 0.22V max dropout voltages, suitable for applications requiring low dropout voltage and multiple outputs. It features a small outline package style, dual terminal position, and matte tin finish.
ADP220ACBZ275275R7
ADP220ACBZ275275R7 by Analog Devices is a PMOS technology-based fixed positive multiple output LDO regulator with two outputs. It has a max dropout voltage of 0.23 V, operating temperature range from -40 to 125 °C, and a package style of grid array with very thin profile. Ideal for applications requiring precise voltage regulation in compact electronic devices.
TPS780300250DRVT
TPS780300250DRVT by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 3V nominal output voltage, 0.25V max dropout voltage, and 0.15A max output current. Ideal for applications requiring stable power supply in compact spaces due to its small outline package style and very thin profile design.
ADP322ACPZ-189-R7
Analog Devices' ADP322ACPZ-189-R7 is a Fixed Positive Multiple Output LDO Regulator with 3 outputs. It offers a Max Dropout Voltage of 0.17 V and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring precise voltage regulation in compact spaces.
MAX8559ETAAO+T
Analog Devices' MAX8559ETAAO+T is a BICMOS LDO regulator with 3.3V and 2.6V outputs, ideal for applications requiring low dropout voltage of 0.12V, such as portable electronics. It features dual terminals, small outline package style, and max operating temperature of 85 °C.
MAX8866TEUA+T
Analog Devices' MAX8866TEUA+T is a fixed positive multiple output LDO regulator with 2 outputs. It has a min input voltage of 2.5V, max output current of 0.1A per output, and operates at temperatures up to 150 °C. Ideal for applications requiring compact power management solutions in electronic devices.
LP2967IMMX-2626
LP2967IMMX-2626 by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 2.6V nominal output voltage, 0.425V max dropout voltage, and 0.15A max output current per channel. It is ideal for applications requiring dual regulated power supplies in compact electronic devices due to its small outline package and low dropout voltage.
CAT6221-PPTD-GT3
CAT6221-PPTD-GT3 by Onsemi is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It has a Max Dropout Voltage of 0.35 V, operating temperature range from -40 to 125 °C, and can handle up to 0.3 A output current. Ideal for applications requiring stable voltage regulation in compact spaces.
NCP3335ADM180R2G
NCP3335ADM180R2G by Onsemi is a Fixed Positive Multiple Output LDO Regulator with 1.8V nominal output voltage, 0.34V max dropout voltage, and 0.5A max output current per channel. It is ideal for applications requiring stable power supply in compact spaces, such as IoT devices and portable electronics.
LDR3318PT-R
STMicroelectronics
LDR3318PT-R by STMicroelectronics is a fixed positive multiple output LDO regulator with a max dropout voltage of 0.8V and supports up to 1A output current. It features two outputs: 1.8V and 3.3V, ideal for powering low-voltage devices in compact applications. Its surface mount design ensures efficient space utilization in electronic circuits.
NCP4523G1T1G
NCP4523G1T1G by Onsemi is a Fixed Positive Multiple Output LDO Regulator with 3 outputs. It has a Max Dropout Voltage of 0.35V and 0.24V, suitable for applications requiring precise voltage regulation in compact spaces. With a package style of Small Outline, Low Profile, Shrink Pitch, it is ideal for surface mount designs in various electronic devices.
LP2966MX5050EP
LP2966MX5050EP by Texas Instruments is a fixed positive multiple output LDO regulator with 2 outputs. It has a max dropout voltage of 0.27 V, operating temperature range from -40 to 125 °C, and can handle up to 0.15 A output current per channel. Ideal for applications requiring stable power supply in compact spaces.
CS8361YDWF16
CS8361YDWF16 by Onsemi is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It offers a Max Dropout Voltage of 0.7V and 0.6V, suitable for applications requiring stable voltage regulation in a compact form factor. Operating temperature ranges from -40 to 150 °C make it versatile for various electronic devices.
TLV7111833DDSER
TLV7111833DDSER by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 2% voltage tolerance. It offers dual outputs at 1.8V and 3.3V, ideal for applications requiring precise voltage regulation in compact designs. Operating temperature range from -40 to 125°C makes it suitable for various electronic devices.
ADP220ACBZ-1827R7
Analog Devices' ADP220ACBZ-1827R7 is a PMOS technology-based LDO regulator with 2 outputs. It offers fixed output voltages of 1.8V and 2.7V, ideal for applications requiring precise voltage regulation in compact spaces. With a max dropout voltage of 0.23V and operating temperatures ranging from -40°C to 125°C, it ensures stable performance in various environments.
MAX8866REUA+
Analog Devices' MAX8866REUA+ is a fixed positive multiple output LDO regulator with 2.7V min and 2.89V max output voltage, suitable for applications requiring dual outputs in a compact design. With a package size of 3x3mm and Gull Wing terminals, it operates at temperatures up to 150°C, making it ideal for space-constrained environments.
MAX8530EBTJO+
Analog Devices' MAX8530EBTJO+ is a BICMOS technology-based LDO regulator with 2 positive outputs. It offers a max dropout voltage of 0.2 V, operating temperature up to 150 °C, and a package style of grid array for applications requiring precise voltage regulation in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved