Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FIXED/ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 2.4 %;
Median Price
$0.665
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Nova Conductors
$1.206
Chip Stock
Digiode
Sea View Technologies
Bristol Electronics
Vyrian
ComSIT Distribution GmbH
ComSIT USA
Anansix
Microfarads
Semi Source
Prism Electronics
Vigor
$0.490
Semicontronic
$0.570
$0.556
$0.553
Ampacity Inc.
Aranea Global
$1.181
$1.134
Argo Parts USA
$1.185
Continental Prestige Electronics
$1.161
Component Stockers USA
$1.600
$1.520
$1.470
Parana Technologies
$3.200
$3.722
Corohmni
$3.235
DigiPath Technology Company
$3.524
IDEA Electronic Components Group
$3.596
$3.236
ChromeModa Solutions
$2.949
Microchip USA
$4.582
Authorized Procurement Solutions
Alle Elektronik GmbH
Kepictronics
Corphita
Perfect Parts
Fixed & Adjustable Regulators - Positive Single Output LDO LP2951CMMX attributes and parameters. Explore more Fixed & Adjustable Regulators - Positive Single Output LDO devices from National Semiconductor
Adjustability:
Maximum Dropout Voltage-1:
Nominal Dropout Voltage-1:
Maximum Input Voltage Absolute:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Line Regulation:
Maximum Load Regulation:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Voltage Tolerance:
Width:
LP2951CMMX Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - EOL 18/Sept/2023
PCN Design/Specification - Copper Bonding Wire 23/Dec/2014 LP2950-N/LP2951-N 18/Jan/2018
PCN Assembly/Origin - Mult Devices 21/Aug/2017
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
LM7805CT
Texas Instruments
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
2N7002
Unisonic Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
SS14
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
2N2222A
Comset Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SPC TECHNOLOGY/ MULTICOMP
OPA2277UA/2K5E4
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
USB3320C-EZK-TR
Microchip Technology
Microchip Technology's USB3320C-EZK-TR is a Bus Controller IC with 32 terminals, operating at 1.6-2V. It supports USB bus compatibility, clock frequency up to 60MHz, and CMOS technology. Ideal for applications requiring Universal Serial Bus peripherals in compact designs with low power consumption.
LL4148
Kec
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ERJ3GEY0R00V
Panasonic
ERJ3GEY0R00V by Panasonic is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. It features a metal glaze/thick film technology, rated for temperatures b/w -55 to 155 °C. With a compact rectangular construction and matte tin over nickel terminal finish, it is ideal for surface mount installations in various electronic devices.
Semicoa
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
LM317AEMP/NOPB
LM317AEMP/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package.
1N4148
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
MAX6469UT29AD1
Analog Devices
Analog Devices' MAX6469UT29AD1 is a BICMOS LDO regulator with 2.9V output voltage, 0.3A output current, and 5V max output voltage. It operates b/w -40 °C to 85°C and is ideal for applications requiring fixed or adjustable positive single-output regulators in compact spaces.
LP2951ACM-3.3/NOPB
LP2951ACM-3.3/NOPB by Texas Instruments is a fixed/adjustable positive single output LDO regulator with 3.3V nominal output voltage, 0.1A max output current, and 30V max input voltage. Ideal for applications requiring precise voltage regulation in compact spaces with operating temperatures ranging from -40 to 125°C.
MAX1818EUT18+T
Analog Devices' MAX1818EUT18+T is a fixed/adjustable LDO regulator with 1.8V output voltage, 0.5A max output current, and 150°C operating temperature. It comes in a small outline package suitable for surface mount applications, making it ideal for compact electronic devices requiring stable power supply solutions.
MAX1792EUA25+
MAX1792EUA25+ by Analog Devices is a fixed/adjustable positive single output LDO regulator with a max output current of 0.5A and dropout voltage of 0.36V. It operates in temperatures ranging from -40 to 85°C, making it suitable for various applications requiring precise voltage regulation in compact spaces. The package style is small outline, thin profile, shrink pitch, ideal for surface mount designs.
LP2952AIM-3.3
LP2952AIM-3.3 by Texas Instruments is a fixed/adjustable positive single output LDO regulator with 3.3V nominal output voltage, 0.25A max output current, and 1.2% max voltage tolerance. It is ideal for applications requiring precise voltage regulation in a compact package with surface mount capability.
LP5904TME-2.5/NOPB
LP5904TME-2.5/NOPB by Texas Instruments is a fixed/adjustable positive single output LDO regulator with a max output current of 0.2A and a nominal output voltage of 2.5V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces. The package style is grid array with very thin profile and fine pitch terminals, ideal for surface mount designs.
LT1580IR-2.5#TR
Analog Devices' LT1580IR-2.5#TR is a BIPOLAR LDO Regulator with 2.5V output voltage, 7A max current, and 0.8V dropout. Ideal for applications requiring precise voltage regulation in compact spaces due to its small outline package and high operating temperature range of -40 to 150 °C.
LT1528CQ#TRPBF
Analog Devices' LT1528CQ#TRPBF is a fixed/adjustable positive single output LDO regulator with a max output current of 3A and dropout voltage of 0.85V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices.
LT1581CT7-2.5#PBF
Analog Devices' LT1581CT7-2.5#PBF is a fixed/adjustable positive single output LDO regulator with 10A max output current and 2.5V nominal output voltage. It features a max dropout voltage of 0.7V, making it suitable for applications requiring precise voltage regulation in temperature-sensitive environments up to 125°C, such as industrial control systems and automotive electronics.
LP2951AMWC
LP2951AMWC by Texas Instruments is a BIPOLAR LDO Regulator with 0.6V Dropout Voltage, 5V Nominal Output, and 29V Max Output. Ideal for applications requiring fixed/adjustable positive single output regulators in surface mount technology. Operating temperature range from -55 to 150°C makes it versatile for various electronic designs.
MAX6469UT19BD2
Analog Devices' MAX6469UT19BD2 is a BICMOS LDO regulator with 1.9V output voltage, 0.3A output current, and 5V max output voltage. It is ideal for applications requiring fixed or adjustable positive single-output regulators in compact spaces due to its small outline package style and low profile design. Operating temperature ranges from -40 °C to 85°C, making it suitable for various electronic devices.
MAX6469TA27AD4
Analog Devices' MAX6469TA27AD4 is a BICMOS LDO regulator with 2.7V output voltage, 0.3A max current, and 5V max output. It operates b/w -40 to 85 °C, suitable for various applications requiring stable voltage regulation in compact designs with its small outline package style.
MAX6469UT24BD3
Analog Devices' MAX6469UT24BD3 is a BICMOS LDO regulator with 1.229V min and 5V max output voltage, ideal for applications requiring precise voltage regulation in compact spaces. With a max output current of 0.3A and operating temperature range from -40 °C to 85°C, it offers reliable performance in various electronic devices. The small outline package with gull wing terminals makes it suitable for surface mount PCB designs.
MAX5024MASA/V+
FIXED/ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
MAX6470TA21BD1
Analog Devices' MAX6470TA21BD1 is a BICMOS LDO regulator with 2.1V output voltage, 0.3A max current, and 5V max output. Ideal for applications requiring fixed/adjustable positive single output regulators in compact spaces due to its small outline package style and low dropout voltage of 0.4V.
LP2951CDR2G
LP2951CDR2G by Onsemi is a fixed/adjustable positive single output LDO regulator with a max output current of 0.1A and a nominal output voltage of 5V. It has a small outline package style, operates at temperatures ranging from -40 to 125°C, and is suitable for applications requiring precise voltage regulation in electronic circuits.
MAX6469TA15AD3
Analog Devices' MAX6469TA15AD3 is a BICMOS LDO regulator with 1.5V output voltage, 0.3A output current, and 2.7% voltage tolerance. Ideal for applications requiring fixed/adjustable positive single output regulators in compact designs with surface mount capability.
LP2951CMM
National Semiconductor
MAX6469TA19AD4
Analog Devices' MAX6469TA19AD4 is a BICMOS LDO regulator with 1.9V output voltage, 0.3A output current, and 2.7% voltage tolerance. Ideal for applications requiring fixed/adjustable positive single output regulators in compact designs with surface mount capabilities. Operating temperature range from -40 to 85 °C makes it versatile for various electronic systems.
MAX6469UT32AD4
Analog Devices' MAX6469UT32AD4 is a BICMOS LDO regulator with 1.229V min and 5V max output voltage, ideal for applications requiring stable power supply in a small form factor. With 0.3A max output current and 2.7% voltage tolerance, it operates b/w -40 °C to 85°C, making it suitable for various electronic devices needing precise voltage regulation.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LP2951CMX/NOPB
FIXED/ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 2.4 %;
LP2951CMX/NOPB by Texas Instruments is a fixed/adjustable positive single output LDO regulator with a max output current of 0.1A and dropout voltage of 0.6V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices.
LP2951ACMX/NOPB
FIXED/ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 1.5 %;
LP2951ACMX/NOPB by Texas Instruments is a fixed/adjustable positive single output LDO regulator with 0.6V max dropout voltage, 5V nominal output voltage, and 125°C max operating temperature. Ideal for applications requiring precise voltage regulation in compact spaces.
LP2951ACDR2G
LP2951ACDR2G by Onsemi is a fixed/adjustable positive single output LDO regulator with a max output current of 0.1A and a nominal output voltage of 5V. It features a small outline package style, operates at temperatures ranging from -40 to 125 °C, and has a dropout voltage as low as 0.35V, making it ideal for various applications requiring precise voltage regulation in compact designs.
LP2951CMX-3.3/NOPB
LP2951CMX-3.3/NOPB by Texas Instruments is a BIPOLAR LDO Regulator with 3.3V Nominal Output Voltage, 0.1A Max Output Current, and 30V Max Input Voltage. Ideal for applications requiring low dropout voltage and precise voltage regulation in compact designs.
LP2951CMX-3.0/NOPB
LP2951CMX-3.0/NOPB by Texas Instruments is a fixed/adjustable positive single output LDO regulator with 3V nominal output voltage, 0.1A max output current, and 29V max output voltage. It operates in temperatures ranging from -40 to 125°C and is suitable for applications requiring precise voltage regulation in compact electronic devices.
LP2951ACMX-3.3/NOPB
LP2951ACMX-3.3/NOPB by Texas Instruments is a fixed/adjustable positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates b/w -40 to 125 °C, and offers low load regulation at 0.2%. Ideal for applications requiring precise voltage regulation in compact designs.
FIXED/ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 1.4 %;
LP2951ACMX-3.0/NOPB
LP2951ACMX-3.0/NOPB by Texas Instruments is a fixed/adjustable positive single output LDO regulator with 3V nominal output voltage, 0.1A max output current, and 29V max output voltage. Ideal for applications requiring precise voltage regulation in compact spaces with operating temperatures ranging from -40 to 125°C.
LP2951ACMM-3.3/NOPB
LP2951ACMM-3.3/NOPB by Texas Instruments is a fixed/adjustable positive single output LDO regulator with 3.3V nominal output voltage, 0.6V max dropout voltage, and 0.2% max load regulation. Ideal for applications requiring precise voltage regulation in a compact form factor such as portable electronics and IoT devices.
FIXED/ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 1.4 %;
LP2951ACMM/NOPB
LP2951ACMM/NOPB by Texas Instruments is a BIPOLAR LDO Regulator with 8 terminals. It offers a Nominal Output Voltage of 5V, Max Dropout Voltage of 0.6V, and Max Load Regulation of 0.2%. Ideal for applications requiring a fixed/adjustable positive single output regulator in compact spaces with operating temperatures ranging from -40°C to 125°C.
Rochester Electronics
FIXED/ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: TSSOP; Terminal Form: GULL WING; Nominal Output Voltage-1: 5 V; Maximum Output Voltage-1: 29 V;
FIXED/ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 1.5 %;
LP2951ACM-3.0/NOPB
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved