Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TWO TERMINAL VOLTAGE REFERENCE; Temperature Grade: INDUSTRIAL; No. of Terminals: 3; Package Code: TSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Median Price
$0.567
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.440
100+ parts
$0.418
1k+ parts
10k+ parts
-
Texas Instruments
$0.464
$0.357
$0.188
Mouser Electronics
$0.670
$0.374
$0.319
$0.298
DigiKey
$0.320
Nova Conductors
Digiode
Bristol Electronics
$0.750
$0.278
$0.195
Chip Stock
ComSIT Distribution GmbH
Vyrian
Sternenhof Electronics
TME
$0.311
Microfarads
Anansix
Netsource Technology, Inc.
Prism Electronics
Argo Parts USA
$0.309
Netroflash
$0.312
Semicontronic
$0.365
$0.363
Corphita
$0.396
Continental Prestige Electronics
$0.434
$0.244
$0.177
Advanced Electronics
Component Stockers USA
$0.690
$0.470
$0.290
Ampacity Inc.
$0.810
Parana Technologies
$12.646
$13.108
DigiPath Technology Company
$13.925
$12.811
IDEA Electronic Components Group
$14.209
$13.499
$12.788
ChromeModa Solutions
$11.651
Corohmni
$22.222
Perfect Parts
QUARKTWIN TECHNOLOGY LTD
Lixinc
A-Z Elektronik GmbH
Technoshack Inc. (Excess)
Futuretech Components
GreenTree Electronics
Lucentia Tech
S.R.D Solutions
Authorized Procurement Solutions
Metaverse IC Inc.
CPlus Electronics
Alle Elektronik GmbH
Modulus Dynamics
Kepictronics
Robosynatics
Voltage References LM431AIM3X/NOPB attributes and parameters. Explore more Voltage References devices from National Semiconductor
Additional Features:
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Maximum Output Voltage:
Minimum Output Voltage:
Nominal Output Voltage:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current (Isup):
Surface Mount:
Technology:
Max Voltage Temp Coef:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Trim or Adjustable Output (V):
Width (mm):
LM431AIM3X/NOPB Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - SOT devices Marking 05//Feb/2024
PCN Assembly/Origin - Mult Devices 21/Aug/2017
PCN Packaging - Pin One Dot 07/Jan/2019
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
LL4148
Taitron Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LM358D-T
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
DS18B20Z
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Accuracy (Cel): 0.50;
1N4148
American Power Devices
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
SS14
Vishay Intertechnology
Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
BAV99
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Changzhou Starsea Electronics
Vishay Telefunken
Pro-an Electronic
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW040210K0FKED
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
SMBJ18CA
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
LM555CMX
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
REF3140AIDBZTG4
REF3140AIDBZTG4 by Texas Instruments is a 3-terminal voltage reference with a nominal output voltage of 4.096 V and a max supply voltage of 5.5 V, suitable for automotive applications. It operates in temperatures ranging from -40 to 125 °C and has a max output current of 0.01 A, making it ideal for precision voltage regulation in compact electronic devices. The package style is small outline, thin profile, shrink pitch with gull wing terminal form for surface mount assembly.
REF02AUG4
REF02AUG4 by Texas Instruments is a voltage reference with adjustable output (V) ranging from 4.985 V to 5.015 V. It has a nominal voltage of 15 V and operates in industrial temperature grade (-40 to 85 °C). This small outline package with gull wing terminals is ideal for precision voltage regulation in various electronic applications.
ADR02AUJZ-REEL7
Analog Devices
ADR02AUJZ-REEL7 by Analog Devices is a 5V voltage reference with adjustable output. It has a temperature range of -40 to 125°C, making it suitable for automotive applications. With a max supply voltage of 36V and low voltage tolerance of 0.1%, this IC is ideal for precision voltage regulation in compact electronic devices.
LT1236ACS8-10#PBF
Linear Technology
THREE TERMINAL VOLTAGE REFERENCE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LT1461CCS8-5#TRPBF
LT1461CCS8-5#TRPBF by Analog Devices is a 3-terminal voltage reference with output voltage of 5V. It operates b/w 0-70°C, suitable for commercial applications. With a supply voltage range of 5.5-20V and low temp coefficient of 12 ppm/°C, it's ideal for precision voltage regulation in various electronic circuits.
LMV431AIMF
National Semiconductor
TWO TERMINAL VOLTAGE REFERENCE; Temperature Grade: INDUSTRIAL; No. of Terminals: 3; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
REF3040AIDBZR
Xilinx
THREE TERMINAL VOLTAGE REFERENCE; Temperature Grade: AUTOMOTIVE; No. of Terminals: 3; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MAX873BESA
Maxim Integrated
MAX873BESA by Maxim Integrated is a voltage reference IC with 2.5V output, adjustable from 2.4975V to 2.5025V, suitable for industrial applications. It operates b/w -40°C to 85°C, with a supply voltage range of 4.5V to 18V and low supply current of 0.375mA, making it ideal for precision voltage regulation in various electronic systems.
TL431AIDBZR
Rochester Electronics
THREE TERMINAL VOLTAGE REFERENCE; Temperature Grade: INDUSTRIAL; No. of Terminals: 3; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM431BIM3X/NOPB
LM431BIM3X/NOPB by Texas Instruments is a voltage reference with adjustable output (2.47-2.52V) and max output current of 0.1A. Ideal for industrial applications, it operates b/w -40 to 85°C, in a small outline package with dual terminals for surface mount assembly.
LM336Z-2.5X
LM336Z-2.5X by National Semiconductor is a 3-terminal voltage reference with adjustable output (2.39-2.59V). Operating from 0 to 70°C, it has a max supply current of 10mA and temp coef of 54 ppm/°C. Ideal for precision applications requiring stable voltage references in commercial-grade environments.
TL431AIDBVT
THREE TERMINAL VOLTAGE REFERENCE; Temperature Grade: INDUSTRIAL; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
REF3040AIDBZR by Texas Instruments is a 3-terminal voltage reference with a nominal output voltage of 4.096 V and max supply voltage of 5.5 V, suitable for automotive applications. It operates in temperatures ranging from -40 to 125°C with a max seated height of 1.12 mm, making it ideal for compact designs requiring precise voltage regulation.
ATL431LIBQDBZR
Texas Instruments' ATL431LIBQDBZR is a voltage reference IC with adjustable output (2.487-2.512V) and small outline package for automotive applications. It operates b/w -40 to 125°C, has 3 terminals, and a max supply voltage of 36V. Ideal for precision voltage regulation in compact electronic designs.
TL431AILPG
TL431AILPG by Onsemi is a three-terminal voltage reference IC with adjustable output from 2.44V to 2.55V. It operates in industrial temperature range (-40°C to 85°C) and can handle max output current of 0.1A. This voltage reference is commonly used in applications requiring precise voltage regulation within a compact cylindrical package.
LM385M3-1.2/NOPB
TWO TERMINAL VOLTAGE REFERENCE; Temperature Grade: COMMERCIAL; No. of Terminals: 3; Package Code: TSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM4040DIZ-5.0/NOPB
Texas Instruments LM4040DIZ-5.0/NOPB is a 3-terminal voltage reference with output voltage range of 4.901V to 5.099V and max tolerance of 1%. Ideal for industrial applications, it operates b/w -40°C to 85°C, featuring a compact cylindrical package style suitable for various electronic devices.
LT1461CCS8-3.3#PBF
ZRB500F01TA
ZRB500F01TA by Diodes Inc. is a 3-terminal voltage reference with a nominal output of 5V and ±1% max voltage tolerance. It operates in industrial temperatures (-40 to 85°C) with a thin profile, small outline package suitable for surface mount applications. This bipolar technology device has a max seated height of 1.12mm, making it ideal for compact electronic designs.
LM4040AIM3-2.5
LM4040AIM3-2.5 by Texas Instruments is a 3-terminal voltage reference with a nominal output voltage of 2.5V and max voltage tolerance of 0.1%. It operates in industrial temperature grades from -40 to 85°C, making it suitable for precision applications requiring stable voltage references in compact designs. The package style is small outline, thin profile, shrink pitch, ideal for surface mount PCBs where space is limited.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LM431BIM3/NOPB
LM431BIM3/NOPB by Texas Instruments is a voltage reference IC with adjustable output (2.47-2.52V) and max output current of 0.1A. It is used in industrial applications, operates b/w -40 to 85°C, and has a package style of small outline, thin profile for surface mount assembly.
LM431AIM3X/NOPB
LM431AIM3X/NOPB by Texas Instruments is a voltage reference with adjustable output (2.44-2.55V) and max output current of 0.1A, suitable for industrial applications. It operates b/w -40 to 85°C, has a small outline package style, and is surface mountable for compact designs.
LM431CIM3X/NOPB
LM431CIM3X/NOPB by Texas Instruments is a voltage reference with adjustable output (2.485-2.51V) and max output current of 0.1A. Ideal for industrial applications, it operates b/w -40 to 85°C, has a small outline package, and supports surface mount technology.
LM431CIM3/NOPB
LM431AIM3/NOPB
LM431AIM3/NOPB by Texas Instruments is a voltage reference with adjustable output (2.44-2.55V). It is a small outline, thin profile package suitable for industrial applications. With a max output current of 0.1A and temperature coefficient of 54.509 ppm/°C, it is ideal for precision voltage regulation in compact electronic devices.
LM431BIM3X
LM431BIM3X by Texas Instruments is a voltage reference IC with adjustable output (2.47-2.52V) in a small outline package suitable for industrial applications. It operates b/w -40 to 85°C, has a max output current of 0.1A, and features a max supply voltage of 37V with low temp coefficient (54.509 ppm/°C).
LM431ACZ/NOPB
LM431ACZ/NOPB by Texas Instruments is a voltage reference IC with adjustable output from 2.44V to 2.55V, ideal for industrial applications. It operates b/w -40°C to 85°C, offering a max output current of 0.1A in a cylindrical package style. With a nominal output voltage of 2.495V and low temp coefficient at 97.338 ppm/°C, it ensures precise voltage regulation in various electronic circuits.
TWO TERMINAL VOLTAGE REFERENCE; Temperature Grade: COMMERCIAL; No. of Terminals: 3; Package Code: TO-92; Package Shape: ROUND; Surface Mount: NO;
LM431BCM3X/NOPB
LM431BIM3
LM431AIM3N1E/NOPB
TWO TERMINAL VOLTAGE REFERENCE; Temperature Grade: INDUSTRIAL; No. of Terminals: 3; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved