Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TWO TERMINAL VOLTAGE REFERENCE; Temperature Grade: INDUSTRIAL; No. of Terminals: 3; Package Code: TSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Median Price
$1.172
Lifecycle Status
Suppliers In-Stock
25
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$1.280
100+ parts
$0.741
1k+ parts
$0.637
10k+ parts
$0.604
Adafruit Industries
$2.209
$2.010
$1.811
-
RS (Exports)
$1.001
DigiKey
$0.643
$0.592
Arrow
$0.567
$0.537
Nova Conductors
$0.616
Digiode
$1.083
Forefront Electronics and Design
$5.880
Chip Stock
Vyrian
Anansix
ComSIT Distribution GmbH
ComSIT USA
Martec Srl
Netsource Technology, Inc.
ABC Electronics Ltd.
Bristol Electronics
Semi Source
Atlantic Semiconductor
LWI Electronics Inc
Component Sense
Prism Electronics
Diverse Electronics
EMSNET
Sea View Technologies
Semicontronic
$0.482
$0.470
$0.468
Ampacity Inc.
Continental Prestige Electronics
Argo Parts USA
$0.598
Netroflash
Modulus Dynamics
$0.684
$0.677
$0.656
Corohmni
$0.744
Corphita
$1.026
Advanced Electronics
Parana Technologies
$17.876
$18.051
ChromeModa Solutions
$20.085
$16.470
IDEA Electronic Components Group
$19.081
$18.076
Perfect Parts
A-Z Elektronik GmbH
Lixinc
Kepictronics
Alle Elektronik GmbH
GreenTree Electronics
DigiPath Technology Company
$18.109
Infinite Electronics LLP (Excess)
Authorized Procurement Solutions
EMSNET (Excess)
Voltage References LM431AIM3/NOPB attributes and parameters. Explore more Voltage References devices from National Semiconductor
Additional Features:
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Maximum Output Voltage:
Minimum Output Voltage:
Nominal Output Voltage:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current (Isup):
Surface Mount:
Technology:
Max Voltage Temp Coef:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Trim or Adjustable Output (V):
Width (mm):
LM431AIM3/NOPB Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
06035C104KAT2A
KYOCERA AVX
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
LM317T/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-609 Code: e3; Package Shape: RECTANGULAR;
LM555CN
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
1N4148
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
2N2222A
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CM
Harris Semiconductor
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
LL4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
STM32H743ZIT6
STMicroelectronics
STM32H743ZIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications, offering features such as 21 timers, CAN and USB connectivity, and low power mode.
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
Asi Semiconductor
Weitronic Enterprise
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Fagor Electronica S Coop
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
REF2033QDDCRQ1
Texas Instruments
REF2033QDDCRQ1 by Texas Instruments is a 5V voltage reference with 3.2983-3.30165V output range, -40 to 125°C operating temp, and 0.05% voltage tolerance. Ideal for automotive applications due to AEC-Q100 screening and nickel palladium gold finish in a rectangular package.
REF5030ID
REF5030ID by Texas Instruments is a voltage reference with output voltage range of 2.997-3.003V, operating temperature -40 to 125°C, and voltage tolerance of 0.1%. It is ideal for automotive applications due to its small outline package, adjustable output, and high accuracy in various temperature conditions.
LM4040BIM3-2.5/NOPB
REF5050IDRG4
REF5050IDRG4 by Texas Instruments is a voltage reference with adjustable output (V) ranging from 4.995 V to 5.005 V, suitable for automotive applications. It operates b/w -40 °C to 125 °C, with a max voltage tolerance of 0.1%. This small outline package has dual terminals and Gull Wing form factor, making it ideal for surface mount designs.
REF5050AIDGKT
REF5050AIDGKT by Texas Instruments is a voltage reference with adjustable output (4.995-5.005V) and 3ppm/°C max voltage temp coef. It is used in automotive applications, has a small outline package style, and operates b/w -40 to 125 °C.
LTC6655LNCHMS8-5#PBF
Analog Devices
LTC6655LNCHMS8-5#PBF by Analog Devices is a 3-terminal voltage reference with output voltage range of 4.9975V to 5.0025V, suitable for automotive applications. It operates b/w -40°C to 125°C, with max supply current of 7.5mA and voltage tolerance of 0.05%.
LM4041DIM3-1.2/NOPB
TWO TERMINAL VOLTAGE REFERENCE; Temperature Grade: INDUSTRIAL; No. of Terminals: 3; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LMV431AIMFX/NOPB
TWO TERMINAL VOLTAGE REFERENCE; Temperature Grade: INDUSTRIAL; No. of Terminals: 3; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
REF3330AIDBZT
REF3330AIDBZT by Texas Instruments is a 3-terminal voltage reference with nominal output of 3V. It operates b/w -40 to 125°C, ideal for automotive applications. With a max voltage tolerance of 0.15%, it comes in a small outline package shape suitable for surface mount assembly.
ADR445ARMZ-REEL7
ADR445ARMZ-REEL7 by Analog Devices is a voltage reference with trimmable output, operating from -40 to 125 °C. It has a nominal output of 5V and voltage tolerance of 0.12%. With a small outline package, it's ideal for automotive applications requiring precise voltage references.
LM385M3-2.5/NOPB
LM385M3-2.5/NOPB by Texas Instruments is a 3-terminal voltage reference IC with a nominal output voltage of 2.5V and max voltage tolerance of 1.52%. It operates b/w 0 to 70°C, making it suitable for commercial applications requiring precise voltage references in compact designs due to its small outline package style and thin profile.
LM4040AEX3-3.3-T
Maxim Integrated
LM4040AEX3-3.3-T by Maxim Integrated is a 3-terminal voltage reference with output voltage of 3.2967-3.3033V, suitable for automotive applications due to its BICMOS technology and -40 to 125°C operating range. It comes in a small outline package with gull wing terminals, making it ideal for surface mount designs requiring precise voltage regulation.
LM4040DIZ-5.0/NOPB
Texas Instruments LM4040DIZ-5.0/NOPB is a 3-terminal voltage reference with output voltage range of 4.901V to 5.099V and max tolerance of 1%. Ideal for industrial applications, it operates b/w -40°C to 85°C, featuring a compact cylindrical package style suitable for various electronic devices.
REF5050IDGKT
REF5050IDGKT by Texas Instruments is a voltage reference with a nominal output of 5V, adjustable from 4.995V to 5.005V. It operates in automotive-grade temperatures (-40 to 125°C) and has a max voltage tolerance of 0.1%. This three-terminal IC is ideal for precision applications requiring stable voltage references.
LT1461CCS8-2.5#PBF
Linear Technology
THREE TERMINAL VOLTAGE REFERENCE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
REF2033AIDDCR
REF2033AIDDCR by Texas Instruments is a voltage reference with 5V nominal voltage, 3.3V output voltage, and 0.05% max voltage tolerance. It is used in automotive applications due to its -40 to 125°C operating temperature range and small outline package style for space-constrained designs. The device features dual terminals, surface mount capability, and a moisture sensitivity level of 2.
LM431BIM3
LM431BIM3 by Texas Instruments is a voltage reference IC with adjustable output (2.47-2.52V) and max output current of 0.1A, suitable for industrial applications. It operates in temperatures ranging from -40 to 85°C, with a small outline package style ideal for surface mount PCB designs. The device features a low temp coefficient of 54.509 ppm/°C and requires a min supply voltage of 2.44V for operation.
LT1461AIS8-3.3#PBF
THREE TERMINAL VOLTAGE REFERENCE; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ISL21080CIH315Z-TK
Intersil
THREE TERMINAL VOLTAGE REFERENCE; Temperature Grade: INDUSTRIAL; No. of Terminals: 3; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TL431ACDBZR
Nexperia
THREE TERMINAL VOLTAGE REFERENCE; Temperature Grade: COMMERCIAL; No. of Terminals: 3; Package Code: TSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LM431BIM3/NOPB
LM431BIM3/NOPB by Texas Instruments is a voltage reference IC with adjustable output (2.47-2.52V) and max output current of 0.1A. It is used in industrial applications, operates b/w -40 to 85°C, and has a package style of small outline, thin profile for surface mount assembly.
LM431BIM3X/NOPB
LM431BIM3X/NOPB by Texas Instruments is a voltage reference with adjustable output (2.47-2.52V) and max output current of 0.1A. Ideal for industrial applications, it operates b/w -40 to 85°C, in a small outline package with dual terminals for surface mount assembly.
LM431AIM3X/NOPB
LM431AIM3X/NOPB by Texas Instruments is a voltage reference with adjustable output (2.44-2.55V) and max output current of 0.1A, suitable for industrial applications. It operates b/w -40 to 85°C, has a small outline package style, and is surface mountable for compact designs.
LM431CIM3X/NOPB
LM431CIM3X/NOPB by Texas Instruments is a voltage reference with adjustable output (2.485-2.51V) and max output current of 0.1A. Ideal for industrial applications, it operates b/w -40 to 85°C, has a small outline package, and supports surface mount technology.
LM431CIM3/NOPB
LM431AIM3/NOPB
LM431AIM3/NOPB by Texas Instruments is a voltage reference with adjustable output (2.44-2.55V). It is a small outline, thin profile package suitable for industrial applications. With a max output current of 0.1A and temperature coefficient of 54.509 ppm/°C, it is ideal for precision voltage regulation in compact electronic devices.
LM431BIM3X
LM431BIM3X by Texas Instruments is a voltage reference IC with adjustable output (2.47-2.52V) in a small outline package suitable for industrial applications. It operates b/w -40 to 85°C, has a max output current of 0.1A, and features a max supply voltage of 37V with low temp coefficient (54.509 ppm/°C).
LM431ACZ/NOPB
LM431ACZ/NOPB by Texas Instruments is a voltage reference IC with adjustable output from 2.44V to 2.55V, ideal for industrial applications. It operates b/w -40°C to 85°C, offering a max output current of 0.1A in a cylindrical package style. With a nominal output voltage of 2.495V and low temp coefficient at 97.338 ppm/°C, it ensures precise voltage regulation in various electronic circuits.
TWO TERMINAL VOLTAGE REFERENCE; Temperature Grade: COMMERCIAL; No. of Terminals: 3; Package Code: TO-92; Package Shape: ROUND; Surface Mount: NO;
LM431BCM3X/NOPB
TWO TERMINAL VOLTAGE REFERENCE; Temperature Grade: COMMERCIAL; No. of Terminals: 3; Package Code: TSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM431AIM3N1E/NOPB
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved