Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Display Drivers; Temperature Grade: OTHER; Terminal Form: BALL; No. of Terminals: 20; Package Code: FBGA; Package Shape: RECTANGULAR;
Median Price
$2.121
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Texas Instruments
1+ parts
100+ parts
$1.859
1k+ parts
$1.050
10k+ parts
-
Nova Conductors
Digiode
$2.015
Vyrian
Anansix
Continental Prestige Electronics
$1.029
Argo Parts USA
Netroflash
Ampacity Inc.
$1.800
Corphita
$1.909
Parana Technologies
$2.528
$3.017
DigiPath Technology Company
$2.783
$2.561
ChromeModa Solutions
$2.840
$2.329
IDEA Electronic Components Group
$2.556
Graphics Display Drivers LM2756TMX/NOPB attributes and parameters. Explore more Graphics Display Drivers devices from National Semiconductor
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Sub-Category:
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
LM2756TMX/NOPB Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
1N4148
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
SZNUP2105LT1G
Onsemi
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
KSZ9031RNXIA
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
2N2222A
Fairchild Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
FDC5614P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
RC0805FR-0710RL
Yageo
Yageo's RC0805FR-0710RL is a 10 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. With a temperature range of -55 to 155 °C, it suits applications requiring precise resistance values in compact surface mount designs.
STM32H743ZIT6
STMicroelectronics
STM32H743ZIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications, offering features such as 21 timers, CAN and USB connectivity, and low power mode.
BSS138W-7-F
Multicomp Pro
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;
LL4148
Kec
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;
BSS138
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
EU2B-YS3103F
Idec
ROTARY SWITCH;
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
BSS84-7-F
SPC TECHNOLOGY/ MULTICOMP
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
Panjit International
LIS3DHTR
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
TLC5926IDBQR
TLC5926IDBQR by Texas Instruments is a graphics display driver with 24 terminals, operating voltage of 3-5.5V, and constant-current output for LED displays. It features a small outline package, serial data input mode, and dual terminal position. Ideal for automotive applications due to its wide temperature range (-40 to 125°C) and moisture sensitivity level of 2.
BCR402WH6327XTSA1
Infineon Technologies
BCR402WH6327XTSA1 by Infineon Technologies is a LED display driver with 4 terminals, small outline package style, and 10V nominal voltage. It is used in graphics display drivers for applications requiring surface mount technology and thin profile packages.
LM3410XMFX/NOPB
LM3410XMFX/NOPB by Texas Instruments is a small outline LED display driver with 5 terminals, suitable for automotive applications. It operates b/w -40 to 125°C, with a supply voltage range of 2.7V to 5.5V. The package style is low profile and surface mountable, making it ideal for graphics display drivers in compact designs.
NSI50010YT1G
NSI50010YT1G by Onsemi is a small outline LED display driver with 2 terminals, matte tin finish, and gull wing terminal form. It has a peak reflow temperature of 260°C and is suitable for graphics display applications requiring compact design and surface mount technology.
IS31FL3236A-QFLS2-TR
Lumissil Microsystems
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 44; Package Code: HVQCCN; Package Shape: SQUARE;
PCF8577CT/F3,118
NXP Semiconductors' PCF8577CT/F3,118 is a 40-terminal graphics display driver with dot matrix display mode and serial data input. Operating b/w -40 to 85 °C, it supports multiplexed displays and has a max supply voltage of 6 V. Ideal for industrial applications requiring liquid crystal display drivers in compact spaces.
LM3409QHVMY/NOPB
National Semiconductor
Display Drivers; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: TSSOP; Package Shape: RECTANGULAR; Peak Reflow Temperature (C): 260;
TPS92518HVPWPT
TPS92518HVPWPT by Texas Instruments is a graphics display driver with 2 channels, operating at -40 to 125 °C. It features a serial data input mode, small outline package style, and supports a max supply voltage of 65 V. Ideal for automotive applications requiring LED display drivers in compact designs.
TLC59210IPWR
TLC59210IPWR by Texas Instruments is a LED display driver with 8 channels, operating at 3-5.5V. It features parallel data input mode, small outline package style, and industrial temperature grade. Ideal for graphics displays, it has 20 terminals in a rectangular shape for surface mount applications.
HV9961LG-G
Supertex
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
MC34844AEPR2
MC34844AEPR2 by NXP Semiconductors is a Graphics Display Driver with SERIAL data input mode, 32 terminals, and 12V power supply. It operates in industrial temperature range (-40 to 105 °C) and supports multiplexed display capability for LED displays.
BU97981MUV-E2
ROHM
ROHM's BU97981MUV-E2 is a 56-terminal graphics display driver with 49 segments. It operates at temperatures from -30 to 70°C and supports power supplies of 2/3.3V to 5V. Ideal for liquid crystal displays, this chip carrier package is surface-mountable and features a segment display mode.
AL8860QMP-13
Diodes Incorporated
LED DISPLAY DRIVER; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260; JESD-609 Code: e3;
FAN5640S7X
FAN5640S7X by Onsemi is a LED display driver with 4 segments, operating voltage range of 6-20V. It has a compact thin profile package suitable for industrial applications. With dual terminals and matte tin finish, it can handle temperatures from -40 to 85°C efficiently.
TPS61165DBV
TPS61165DBV by Texas Instruments is a LED display driver with 10 segments. It operates b/w -40 to 85 °C and has a supply voltage range of 3-18 V. This small outline, low profile IC is ideal for industrial applications requiring compact design and efficient power management.
TPS92638QPWPRQ1
TPS92638QPWPRQ1 by Texas Instruments is an LED display driver with 8 channels, suitable for automotive applications. It operates b/w -40 to 125 °C and supports a supply voltage range of 5-40 V. The package style is small outline with a max seated height of 1.2 mm, making it ideal for compact designs in automotive displays.
BCR402UE6327HTSA1
BCR402UE6327HTSA1 by Infineon Technologies is a LED display driver with 6 terminals in a small outline package. It operates at 10V nominal voltage, with terminal pitch of 0.95mm and gull wing terminal form. Ideal for graphics display applications due to its compact size and surface mount capability.
MP2489DJ-LF-Z
Monolithic Power Systems
MP2489DJ-LF-Z by Monolithic Power Systems is a LED display driver with a supply voltage range of 6V to 60V. It operates in industrial temperatures from -40°C to 85°C, making it suitable for various graphics display applications. This small outline package has dual terminals and a max seated height of 1mm, ideal for compact designs.
TLC5928DBQR
TLC5928DBQR by Texas Instruments is a graphics display driver with 24 terminals, operating voltage range of 3-5.5V, and serial data input mode. Ideal for LED displays, it has a small outline package style, dual terminal position, and can handle temperatures from -40 to 85°C.
HV9910CLG-G
HV9910CLG-G by Microchip Technology is a LED display driver with 8 terminals, operating voltage range of 15-450V, and automotive temperature grade. It is designed for graphics display applications, featuring small outline package style and dual terminal position for easy integration. With matte tin finish and gull wing terminal form, it ensures reliable performance in various environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LM27961TLX/NOPB
LM27961TLX/NOPB by National Semiconductor is a Graphics Display Driver with 18 terminals, operating voltage range of 2.7V to 5.5V, and peak reflow temperature of 260°C. It is ideal for LED display driver applications due to its thin profile package style and fine pitch terminal design.
LM27966SQ/NOPB
LM27966SQ/NOPB by Texas Instruments is a graphics display driver with a serial data input mode. It operates at a max supply voltage of 5.5V and has 6 channels. This IC is commonly used as an LED display driver in various applications.
LM27966SQ/NOPB by National Semiconductor is a graphics display driver with a square package shape and 24 terminals. It operates at temperatures ranging from -30 to 85 °C and has a power supply of 3/5V. This CMOS technology chip carrier is commonly used in applications requiring high-quality graphics displays.
LM27952SD/NOPB
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 14; Package Code: HVSON; Package Shape: RECTANGULAR;
LM27952SD/NOPB by Texas Instruments is a graphics display driver with 14 terminals, operating voltage range of 3-5.5V, and constant-current output for LED displays. It features a small outline package style, industrial temperature grade, and CMOS technology suitable for LED display applications in various industries.
LM2755TMX/NOPB
LED DISPLAY DRIVER; Temperature Grade: OTHER; Terminal Form: BALL; No. of Terminals: 18; Package Code: VFBGA; Package Shape: RECTANGULAR;
Display Drivers; Temperature Grade: OTHER; Terminal Form: BALL; No. of Terminals: 18; Package Code: FBGA; Package Shape: RECTANGULAR;
LM2756TMX/NOPB
LM2756TMX/NOPB by Texas Instruments is a graphics display driver with a max supply voltage of 5.5V and a min operating temperature of -30°C. It is used as an LED display driver in applications requiring constant-current output characteristics.
LM2755TM/NOPB
LM2751SD-B/NOPB
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 10; Package Code: HVSON; Package Shape: SQUARE;
LM2753SDX/NOPB
LM2754SQ
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
LM2754SQ/NOPB
LM2715SQX-ADJ
LIQUID CRYSTAL DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: RECTANGULAR;
LM2751SDX-A
LM2754SQX
LM2754SQX/NOPB
LM2715MTX-ADJ
LIQUID CRYSTAL DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;
LM2756TMX
LED DISPLAY DRIVER; Temperature Grade: OTHER; Terminal Form: BALL; No. of Terminals: 20; Package Code: VFBGA; Package Shape: RECTANGULAR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved