Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Other Regulators; No. of Terminals: 3; Terminal Form: WIRE; Maximum Input Voltage Absolute: 42 V; Maximum Voltage Tolerance: 3 %; Maximum Output Current-1: .2 A;
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Anansix
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Vyrian
Corphita
Other Function Regulators LM120H24/883 attributes and parameters. Explore more Other Function Regulators devices from National Semiconductor
Adjustability:
Maximum Input Voltage Absolute:
JESD-30 Code:
JESD-609 Code:
Maximum Line Regulation:
Maximum Load Regulation:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Nominal Output Voltage-1:
Package Body Material:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Qualification Status:
Screening Level:
Sub-Category:
Technology:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Voltage Tolerance:
LM120H24/883 Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
2N7002
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BAV99
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
SS14
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
2N2222A
Crystalonics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ULN2803A
Texas Instruments
ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.
1N4148
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
LL4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Hitano Enterprise
Sensitron Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
Intersil
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
1N4148WS
Multicomp Pro
Temic Semiconductors
MBRS360T3G
Onsemi
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
UA78M20MJG
UA78M20MJG by Texas Instruments is a ceramic package bipolar regulator with an output voltage of 20V and load regulation of 0.2%. It operates in temperatures ranging from -55°C to 125°C, making it suitable for various applications requiring stable fixed voltage supply. With 8 terminals and through-hole terminal form, it offers reliable performance in diverse electronic circuits.
NJU7774F32-TE1
New Japan Radio
Other Regulators; JESD-609 Code: e6; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260; Terminal Finish: TIN BISMUTH;
SN0211032DBVR
Texas Instruments SN0211032DBVR is a CMOS regulator with 1.6V output voltage, 0.15A output current, and 4% voltage tolerance. It operates b/w -40°C to 125°C, suitable for applications requiring precise voltage regulation in compact designs like portable electronics and IoT devices.
LM9036MM-3.3/NOPB
National Semiconductor
Other Regulators; No. of Terminals: 8; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 55 V; Maximum Voltage Tolerance: 5 %;
SN0211070DBVR
Texas Instruments' SN0211070DBVR is a CMOS regulator with 5 terminals, adjustable output voltage from 1.6V to 9.5V, and max output current of 0.15A. Ideal for applications requiring precise voltage regulation in temperature range -40°C to 125°C, such as portable electronics and automotive systems.
UA78L05CLPP1
UA78L05CLPP1 by Texas Instruments is a fixed 5V voltage regulator with a max output current of 0.1A and operating temperature range from 0 to 125°C. It features a bipolar technology, plastic/epoxy package body material, and is ideal for applications requiring stable power supply in various electronic devices.
TA78015AP
Toshiba
Toshiba's TA78015AP is a 3-terminal fixed voltage regulator with an output of 15V and max current of 1.4A. Operating b/w 0-125°C, it has a dropout voltage of 2V and can handle input voltages up to 35V. Ideal for applications requiring stable power supply in various electronic devices.
UA78L12ACLP3
UA78L12ACLP3 by Texas Instruments is a fixed 12V voltage regulator with a max output current of 0.1A and operating temperature range from 0 to 125°C. It features a plastic/epoxy package body material, bipolar technology, and offers excellent line and load regulation for various electronic applications.
TL780-05CKC3
TL780-05CKC3 by Texas Instruments is a 5V fixed voltage regulator with 1.5A output current and 2% voltage tolerance. It operates b/w 0°C to 125°C, making it suitable for various applications requiring stable power supply such as industrial automation and consumer electronics. The device features a plastic/epoxy package body material and bipolar technology for reliable performance in diverse environments.
UA78M08CKC1
UA78M08CKC1 by Texas Instruments is a fixed 8V voltage regulator with 3 terminals and 5% voltage tolerance. Operating temperature ranges from 0 to 125°C, making it suitable for various applications in electronics requiring stable power supply regulation. Its bipolar technology and plastic/epoxy package body material ensure reliable performance in diverse environments.
LM340T5.0
Motorola
LM340T5.0 by Motorola is a 3-terminal fixed voltage regulator with a nominal output of 5V and max output current of 1.5A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation such as power supplies and battery chargers. Its bipolar technology ensures efficient performance with low dropout voltage and high load regulation capabilities.
UA78M10MJG
UA78M10MJG by Texas Instruments is a 10V fixed voltage regulator with 0.5A output current and 2.5V dropout voltage, ideal for applications requiring stable power supply. With a max input voltage of 35V and operating temperature range from -55 to 150°C, it ensures reliable performance in various environments. Featuring ceramic package material and through-hole terminals, this bipolar technology regulator offers precise regulation with low line/load variations.
UA7908CKCP1
UA7908CKCP1 by Texas Instruments is a fixed bipolar regulator with an output voltage of -8V and max current of 1.5A. It has a plastic/epoxy package body, operates b/w 0-125°C, and offers 5% voltage tolerance. Ideal for applications requiring stable power supply in various electronic devices.
LP2997MX
LP2997MX by Texas Instruments is a DDR termination regulator with 8 terminals in a small outline package. It operates b/w 0°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces. The surface-mount design and gull wing terminals enhance its versatility for different electronic devices.
UA78M08CKDP3
UA78M08CKDP3 by Texas Instruments is a fixed 8V voltage regulator with 3 terminals and 5% voltage tolerance. Operating temperature ranges from 0 to 125°C, suitable for various applications requiring stable power supply such as industrial automation and consumer electronics. Its bipolar technology ensures efficient performance in plastic/epoxy package body material.
UA7918CKCP3
UA7918CKCP3 by Texas Instruments is a fixed bipolar regulator with an output voltage of -18V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable power supply regulation. With a package body material of PLASTIC/EPOXY, this regulator offers precise voltage control with low line and load regulation percentages.
TPS77328DGKT
TPS77328DGKT by Texas Instruments is a CMOS regulator with 2.8V output voltage, 0.25A max current, and 0.27V dropout voltage. It operates b/w -40 to 125°C, suitable for various applications requiring stable power supply in compact designs with its small outline package and gull wing terminals.
UA78M12MJGB
UA78M12MJGB by Texas Instruments is a fixed voltage regulator with an output of 12V and max current of 0.5A. It operates in temperatures ranging from -55 to 150°C, making it suitable for various applications requiring stable power supply such as industrial equipment and automotive electronics. With a package style of IN-LINE and through-hole terminal form, it offers reliable performance in diverse environments.
NCP51200MNTXG
NCP51200MNTXG by Onsemi is a DDR termination regulator with a max operating temperature of 125°C and a min operating temperature of -40°C. It is used in applications such as small outline, heat sink/slug, very thin profile packages with 10 terminals.
LM9036M-5.0/NOPB
Other Regulators; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 55 V; Maximum Voltage Tolerance: 5 %;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved