Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Median Price
-
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
R&J Components
Anansix
Cyclops Electronics Ltd
Native Components
$0.227
$0.218
Northwest PG Solutions
$0.250
$0.220
Parana Technologies
$8.953
$9.624
ChromeModa Solutions
$10.060
$8.249
IDEA Electronic Components Group
$9.557
$9.054
AZTECH Wire
$17.361
One Stop Electronics
$37.500
Lixinc
Alle Elektronik GmbH
Glotronic Ltd.
Authorized Procurement Solutions
Corphita
DigiPath Technology Company
$9.070
Microchip USA
Line Drivers & Receivers DS92001TMAX attributes and parameters. Explore more Line Drivers & Receivers devices from National Semiconductor
Differential Output:
Driver No. of Bits:
Maximum High Level Input Current:
Input Characteristics:
Interface IC Type:
Interface Standard:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Minimum Out Swing:
Output Characteristics:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Receive Delay:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Transmit Delay:
Width:
DS92001TMAX Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
2N2222A
Telcom Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM7805CT/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
M24308/2-1F
Esterline Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
1554216004
Molex
WIRE AND CABLE;
STM32H743BIT6
STMicroelectronics
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
CL10B104KB8NNNC
Samsung Electro-mechanics
CL10B104KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in various electronic devices. With dimensions of 1.6mm x 0.8mm x 0.9mm, it operates b/w -55 to 125 °C providing stable performance in compact designs.
BAV99
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Changzhou Galaxy Century Microelectronics
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
1N4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
SMBJ18CA
Semitron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32F401CDY6TR
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
SS14
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138PS,115
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
LP2950CDT-3.3G
Onsemi
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
EU2B-YS2J03C
Idec
ROTARY SWITCH;
2N7002
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
LTC1535ISW#PBF
Analog Devices
LTC1535ISW#PBF by Analog Devices is a CMOS Line Transceiver with EIA-422 and EIA-485 interface standards. It operates in industrial temperature range (-40 to 85 °C) with differential output and Schmitt trigger input characteristics. Ideal for applications requiring reliable communication over long distances.
THVD2410DGKR
Texas Instruments
THVD2410DGKR by Texas Instruments is a line transceiver with differential output and Schmitt trigger input. It operates in automotive temperature grade range (-40 to 125 °C) with max supply voltage of 5.5 V. Ideal for EIA-422-B, TIA-422-B, EIA-485-A, and TIA-485-A interface standards applications due to its fast transmit delay (350 ns) and low receive delay (80 ns).
SN65176BDRG4
SN65176BDRG4 by Texas Instruments is a Line Driver & Receiver with 8 terminals. It operates at 5V, has a max supply voltage of 5.25V, and offers differential output. Ideal for industrial applications requiring EIA-422-B, TIA-422-B, EIA-485-A, TIA-485-A, V.11, or X.27 interface standards in compact designs.
ISL3173EIUZ-T
Renesas Electronics
ISL3173EIUZ-T by Renesas Electronics is a Line Driver & Receiver with 10 terminals, operating at -40 to 85°C. It features EIA-422 and EIA-485 interface standards, BICMOS technology, and a supply voltage range of 3V to 3.6V. Ideal for industrial applications requiring differential output and Schmitt trigger input characteristics.
LTC2861IDE#PBF
LTC2861IDE#PBF by Analog Devices is an EIA-485-A/TIA-485-A/EIA-422 line transceiver with CMOS technology. It operates at 4.5V to 5.5V, has a max transmit delay of 50ns, and a max receive delay of 70ns. Ideal for industrial applications requiring differential outputs and Schmitt trigger input characteristics.
MAX232ACPE
Rochester Electronics
LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
MAX3232IPWRE4
MAX3232IPWRE4 by Texas Instruments is a Line Driver & Receiver with 16 terminals, operating at -40 to 85 °C. It has a max supply voltage of 3.6 V and peak reflow temperature of 260 C. Ideal for industrial applications requiring EIA-232-F, TIA-232-F, V.28 interface standard compliance.
SN65HVD1781DRG4
SN65HVD1781DRG4 by Texas Instruments is a line driver/receiver with 5.5V max supply voltage, 200ns max transmit delay, and differential output. Ideal for automotive applications due to its EIA-485-A interface standard and operating temperature range of -40 to 125°C.
SN65176BDR
SN65176BDR by Texas Instruments is a line driver & receiver with 8 terminals, operating at 5V. It features a max supply voltage of 5.25V, transmit delay of 22ns, and operates in industrial temperature range (-40 to 105°C). Ideal for EIA-422-B, TIA-422-B, EIA-485-A interfaces in various applications requiring differential output and Schmitt trigger input characteristics.
THVD2410DRBR
THVD2410DRBR by Texas Instruments is a line transceiver with differential output, suitable for automotive applications. It operates b/w -40 to 125°C and supports EIA-422-B, TIA-422-B, EIA-485-A, and TIA-485-A interface standards. With a max transmit delay of 350ns and max supply current of 5.6mA at 5.5V, it offers reliable communication in harsh environments.
SP3485EN-L
Exar
Exar's SP3485EN-L is a BICMOS line transceiver with EIA-422/EIA-485 interface standards. It operates at 3.3V, has 8 terminals, and offers differential output. With a max transmit delay of 60ns, it is ideal for industrial applications requiring reliable communication over short distances.
MAX232N
MAX232N by Texas Instruments is a Line Driver & Receiver with 2 functions, operating at 5V. It features IN-LINE package style, TOTEM-POLE output characteristics, and EIA-232-F interface standard. Ideal for applications requiring inverted output polarity and Schmitt trigger input characteristics in commercial temperature grade environments.
ISO1412DW
ISO1412DW by Texas Instruments is a line driver/receiver with 16 terminals, operating at -40 to 125°C. It features EIA-485-A and EIA-422 interface standards, with differential output and Schmitt trigger input characteristics. Ideal for automotive applications due to its small outline package and nickel palladium gold terminal finish.
SN65HVD32DR
SN65HVD32DR by Texas Instruments is a line driver/receiver with 3.6V max supply voltage, 305ns max transmit delay, and 70ns max receive delay. Ideal for industrial applications requiring EIA-422-B, TIA-422-B, EIA-485-A, TIA-485-A, V.11 interface standards in a compact package style with dual terminals and CMOS technology.
ISL83483IBZ
Intersil
MAX3232EIDWR
MAX3232EIDWR by Texas Instruments is a Line Driver & Receiver with 16 terminals. It operates at 3.3/5V, has a max supply voltage of 3.6V, and supports EIA-232-F interface standard. Ideal for industrial applications requiring inverted output polarity and Schmitt trigger input characteristics.
MAX3430ESA
Maxim Integrated
MAX3430ESA by Maxim Integrated is a Line Driver & Receiver with 3.63V max supply voltage, 1500ns max transmit delay, and 120ns max receive delay. Ideal for EIA-422, EIA-485, TIA-485 interfaces in industrial applications requiring differential output and Schmitt trigger input characteristics.
Maxlinear
MAX232CSE+
LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
MAX3221EUE+
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved