Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DM74ALS163BN by National Semiconductor is a 4-bit synchronous digital counter with load/preset input. Operating at 5V, it has a max frequency of 40MHz and propagation delay of 20ns. Ideal for applications requiring precise counting in TTL technology circuits.
Median Price
$27.095
Lifecycle Status
Suppliers In-Stock
29
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
100+ parts
$24.656
1k+ parts
$22.218
10k+ parts
-
Digiode
$0.217
TEDSS.com
$0.650
Component Electronics Inc.
$0.770
$0.580
$0.500
American Microsemiconductor Inc.
$0.790
DigiKey Marketplace
$0.240
R&J Components
Vyrian
Mil-Aero Solutions, Inc.
ACDS - Activité Composants Distribution Service
Anansix
Resion
Electronic Expediters
Halfin
Bristol Electronics
Fibra_Brandt Electronic GMBH
Connector Distribution Corp
Right Parts Inc.
M&R Communications
Prism Electronics
Nova Conductors
Q Components
PAR Electronics
Flex Direct, LLC
ECAB
Manoshevitz Elec. Sales
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
DF Sales Co.
Corphita
$0.205
Component Stockers USA
$0.230
$0.220
$0.200
Corohmni
$10.187
AZTECH Wire
$14.072
Aztec Data Supply Inc.
$14.212
Ampacity Inc.
$23.030
Advanced Electronics
QUARKTWIN TECHNOLOGY LTD
A-Z Elektronik GmbH
Authorized Procurement Solutions
Alle Elektronik GmbH
Perfect Parts
Microchip USA
Glotronic Ltd.
Argo Parts USA
Metaverse IC Inc.
Supply Digital
Cyclops Electronics Ltd (Excess)
Infinite Electronics LLP (Excess)
Continental Prestige Electronics
Bastille Electronics
Speed Components Ltd (Excess)
Kepictronics
Assy Fe
PLASTIC/EPOXY material provides durability and protection to the internal components of the digital counter, ensuring long-term reliability.
Having 4 bits allows for a wide range of counting possibilities, suitable for various applications.
Operating at a nominal supply voltage of 5V ensures compatibility with standard electronic systems, making integration easy.
The low propagation delay of 20ns ensures quick response time for counting operations, enhancing efficiency.
Using TTL technology ensures high-speed and reliable operation, making it suitable for demanding counting tasks.
Digital Counters DM74ALS163BN attributes and parameters. Explore more Digital Counters devices from National Semiconductor
Additional Features:
Count Direction:
Family:
JESD-30 Code:
JESD-609 Code:
Length:
Load Capacitance (CL):
Load or Preset Input:
Logic IC Type:
Maximum Frequency At Nominal Supply:
Maximum I (ol):
Operation Mode:
No. of Bits:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Maximum Power Supply Current (ICC):
Propagation Delay (tpd):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage / Vsup (V):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Trigger Type:
Width:
Minimum fmax:
DM74ALS163BN Logic ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
NSN
5962-01-423-8587, 5962014238587
NIIN
014238587
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
2N7002
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
MBR0520LT1
Onsemi
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
1N4148
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
MBR130T1G
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
2N2222A
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
DS18B20Z
Maxim Integrated
DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.
BAV99
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
1N4148WS
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14+
Multicomp Pro
SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
BSS138BK,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;
LM317T
Fairchild Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
IRLML6401TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
CD4541BM96G4
Texas Instruments
CD4541BM96G4 by Texas Instruments is a 16-bit digital counter with positive edge trigger, synchronous operation mode, and 18000 ns propagation delay. It is used in military-grade applications for counting up signals with a supply voltage range of 3V to 18V. The package style is small outline with dual-position gull wing terminals.
SN74LV163ADGVR
SN74LV163ADGVR by Texas Instruments is a 4-bit digital counter with a propagation delay of 11.5 ns and operates at a max frequency of 50 MHz. It is designed for industrial applications requiring synchronous operation, positive edge triggering, and a supply voltage range from 2V to 5.5V.
CD4516BE
Thomson Consumer Electronics
BINARY COUNTER; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
CD4022BNSR
CD4022BNSR by Texas Instruments is an 8-bit digital counter with a propagation delay of 270 ns and max frequency of 5.5 MHz. It operates on a nominal voltage of 5V, suitable for military-grade applications requiring synchronous operation and positive edge triggering in a compact small outline package.
CD4018BE
CD4018BE by Texas Instruments is a CMOS digital counter with 5 bits and 16 terminals. It operates synchronously with a propagation delay of 180 ns at 5V, suitable for military-grade applications. The package is rectangular in shape, measuring 19.305mm x 7.62mm x 5.08mm, with a max frequency of 3MHz at nominal voltage.
MC74AC161DG
BINARY COUNTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
SN74LV393APWRE4
SN74LV393APWRE4 by Texas Instruments is a digital counter with 4 bits, operating at 3.3V. It features a propagation delay of 32ns and can handle load capacitance up to 50pF. Ideal for industrial applications requiring asynchronous operation and negative edge triggering, this CMOS technology-based device has a max frequency of 35MHz.
SN74HC590ADWR
SN74HC590ADWR by Texas Instruments is an 8-bit digital counter with a propagation delay of 38ns at 5V. It operates in industrial temperatures (-40 to 85°C) and has a max frequency of 16MHz. Ideal for applications requiring asynchronous operation and positive edge triggering, it comes in a small outline package suitable for surface mounting.
CD74HC191M96G4
CD74HC191M96G4 by Texas Instruments is a 4-bit digital counter with load/preset input and positive edge trigger. Operating at 2-6V, it has a max frequency of 20MHz and propagation delay of 255ns. Ideal for military applications due to its MILITARY temperature grade, this CMOS technology device comes in a small outline package suitable for surface mount assembly.
SN74HC4020PWRG4
SN74HC4020PWRG4 by Texas Instruments is a 14-bit digital counter with a max frequency of 22MHz. It operates on a supply voltage range of 2-6V and has a propagation delay of 190ns. Ideal for industrial applications requiring asynchronous count direction, it features negative edge triggering and comes in a small outline package with surface mount capability.
HEF4060BT,653
NXP Semiconductors
HEF4060BT,653 by NXP Semiconductors is a 14-bit digital counter with 420 ns propagation delay and operates on a supply voltage range of 3-15V. Ideal for industrial applications, it features negative edge trigger type, up count direction, and can handle frequencies up to 4MHz.
CD74HCT40103E
CD4059AM96E4
CD4059AM96E4 by Texas Instruments is a CMOS digital counter with 24 terminals, operating at 5V supply voltage. It features a propagation delay of 360ns and can handle frequencies up to 1.5MHz. Ideal for military applications due to its wide temperature range (-55°C to 125°C) and bidirectional count direction capability.
CD74HC191ME4
CD74HC191ME4 by Texas Instruments is a 4-bit digital counter with synchronous operation. It features a max frequency of 23 MHz and propagation delay of 255 ns. Ideal for military-grade applications, it operates within a temperature range of -55 to 125°C.
74HC40103D
Philips Semiconductors
BINARY COUNTER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
CD74HCT393M96
Rca Solid State
BINARY COUNTER; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
HEF4017BT-Q100J
RING COUNTER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
74HCT193PW-Q100J
NXP Semiconductors' 74HCT193PW-Q100J is a CMOS digital counter with 4 bits, operating at a max frequency of 13 MHz. It features load/preset inputs, positive edge trigger, and synchronous operation mode. With AEC-Q100 screening level, it's ideal for automotive applications requiring bidirectional counting in a compact package style.
HCF4060YM013TR
STMicroelectronics
HCF4060YM013TR by STMicroelectronics is a 14-bit digital counter with 740 ns propagation delay. Operating at temperatures from -40 to 125°C, it has a max frequency of 3.5 MHz and supports supply voltages from 3V to 20V. Ideal for automotive applications due to AEC-Q100 screening level and small outline package style.
CD4029BEX
Harris Semiconductor
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DM74ALS163BN
BINARY COUNTER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
DM74ALS163BM
BINARY COUNTER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
DM7493AN
BINARY COUNTER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
DM74LS160N
DM74LS160N by National Semiconductor is a TTL synchronous digital counter with 16 terminals. It operates at 5V, with load/preset input and max frequency of 25MHz. Commonly used in applications requiring up counting, it has a max power supply current of 32mA and can withstand temperatures from 0 to 70°C.
DECADE COUNTER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
DM74LS161N/A+
DM74LS161AJ
DM74LS163J
DM74LS168AN
DM7490AN/A+
DECADE COUNTER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
DM74190N
DM74LS169AM
DM74190J
DM7490AN
DM74LS160N/A+
DM74ALS162N/B+
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved