Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's NCP21XW222J03RA is a 2200 ohm NTC thermistor with thermal sensitivity index of 3950 K. It features dual-ended terminals, SMT package style, and operates b/w -40 to 125 °C. Ideal for temperature compensation applications with 5% tolerance and operating voltage of 5 V.
Median Price
$0.065
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
DigiKey
1+ parts
$0.170
100+ parts
$0.113
1k+ parts
$0.095
10k+ parts
-
Chip1Stop
$0.046
Arrow
Verical
Bristol Electronics
Electronic Expediters
Component Sense
Nova Conductors
Modulus Dynamics
$0.052
Corohmni
$0.430
Eastek
Metaverse IC Inc.
Glotronic Ltd.
GreenTree Electronics
Authorized Procurement Solutions
Argo Parts USA
Continental Prestige Electronics
Aranea Global
The ability to provide temperature compensation is essential for accuracy in various electronic applications.
The specific resistance value of 2200 ohm ensures reliable temperature sensing and compensation.
With a high maximum operating temperature of 125°C, this thermistor can withstand demanding environmental conditions.
The high thermal sensitivity index of 3950 K ensures precise temperature measurements and compensation.
The surface mount design allows for easy and efficient installation on circuit boards, saving space and reducing overall production costs.
Non-linear Resistors NCP21XW222J03RA attributes and parameters. Explore more Non-linear Resistors devices from Murata Manufacturing
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Reference Standard:
Resistance:
Resistor Type:
Terminal Finish:
Terminal Placement:
Terminal Shape:
Thermal Sensitivity Index:
Thermistor Application:
Tolerance:
Operating Voltage:
NCP21XW222J03RA Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
2N7002
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
08055C104KAT2A
KYOCERA AVX
08055C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
SMBJ18CA
General Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
2N2222A
International Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
06035C104KAT2A
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
1N4148
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
STM32H753IIK6
STMicroelectronics
STM32H753IIK6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like CAN, ETHERNET, and USB. Ideal for industrial applications requiring high-speed processing and extensive connectivity options.
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
0462-201-16141
TE Connectivity
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
BAV99-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Microsemi
DS18B20Z+T&R
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Body Material: PLASTIC/EPOXY;
Zowie Technology
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
Rectron
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
NTCALUG01A103F161A
Vishay Intertechnology's NTCALUG01A103F161A is a 10000 ohm NTC thermistor with 1% tolerance. It has a thermal sensitivity index of 3984 K and operates b/w -40 to 150 °C. Ideal for temperature sensing applications, it features radial terminal placement and tin finish, suitable for chassis mount installations.
RXEF110K-AP
TE Connectivity's RXEF110K-AP is a PTC resettable fuse with rated AC voltage of 72V. It has radial terminal placement and disk package shape, suitable for temperature sensing applications. With operating temperatures from -40°C to 85°C, it is mounted through hole for reliable performance.
MPTS2920L150
Meritek Electronics
MPTS2920L150 by Meritek Electronics is a PTC thermistor with 1.5W power dissipation, operating b/w -40°C to 85°C. It features dual-ended terminals in a rectangular package for temperature sensing applications. The thermistor has pure tin terminal finish and is surface mountable for easy installation.
NANOSMDC050F/13.2-2
TE Connectivity's NANOSMDC050F/13.2-2 is a PTC resettable fuse with dual-ended terminals, rated at 0.8W power dissipation. It has a rectangular package shape and operates b/w -40°C to 85°C, making it ideal for temperature sensing applications in surface mount installations.
NTC0805J100K
TE Connectivity's NTC0805J100K is a 100k ohm NTC thermistor with 5% tolerance. It operates b/w -55°C to 125°C, making it ideal for temperature sensing applications. With a thermal sensitivity index of 4100 K, this surface mount thermistor offers accurate and reliable performance in compact devices.
SMD030F-2018-2
Littelfuse
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .5 ohm; Maximum Operating Temperature: 85 Cel; Operating Voltage: 60 V; Terminal Shape: FLAT;
S14K275
Infineon Technologies
S14K275 by Infineon Technologies is a VARISTOR with METAL OXIDE FILM tech. It has 71J energy capacity, 275V RMS & 350V DC max circuit voltage. Ideal for THROUGH HOLE MOUNT applications requiring surge protection in various electronic circuits.
MF-SM030-2-99
Bourns
Bourns MF-SM030-2-99 is a PTC resettable fuse with 60V URac, 1.7W P, and -40 to 85°C operating range. It offers overload protection in surface mount applications with dual-ended terminals in a rectangular package.
B72214-S300-K101
TDK
TDK B72214-S300-K101 varistor with 30V URac, 9J energy absorption, and -40 to 85°C temp range. Ideal for surge protection in circuits due to its metal oxide film technology and radial package shape. Suitable for applications requiring high voltage tolerance and through-hole mounting.
RXEF050-1
TE Connectivity's RXEF050-1 is a PTC resettable fuse with 72V URac. It has a rated power dissipation of 0.77W and max operating temp of 85°C. Ideal for temperature sensing applications, it features radial terminal placement in a disk package for through-hole mounting.
LVR075S-240
TE Connectivity's LVR075S-240 is a PTC resettable fuse with resistance of 0.316 ohm and max circuit voltage of 240V. Ideal for temperature sensing applications, it operates b/w -40 to 85°C. Featuring radial terminal placement, it is CSA, TUV, and UL certified.
CG0402MLU-12G
The Bourns CG0402MLU-12G is a varistor with 12V operating voltage, -40 to 125°C temp range. It has dual-ended terminals, metal oxide film tech, and SMT package style. Ideal for surge protection in electronic circuits due to its compact size and high reliability.
RXEF010-1
TE Connectivity's RXEF010-1 is a PTC resettable fuse with radial terminal placement and disk package shape. Ideal for temperature sensing applications, it operates b/w -40°C to 85°C. With through-hole mounting, this non-linear resistor has 2 wire terminals.
ERZE14A241
Panasonic
Panasonic ERZE14A241 is a VARISTOR with 168J energy capacity, 150V RMS voltage, and -40 to 85°C operating range. Ideal for surge protection in various applications due to its THROUGH HOLE MOUNT design and BULK packaging method.
NTCS0402E3104FHT
Vishay Intertechnology's NTCS0402E3104FHT is a NTC thermistor with 100000 ohm resistance, 1% tolerance, and 3950 K thermal sensitivity index. Ideal for temperature sensing applications due to its dual-ended terminal placement and surface mount package style. Operating range from -40°C to 150°C makes it suitable for various industries.
60R050XU
60R050XU by Littelfuse is a PTC resettable fuse with resistance of 0.5 ohm and operating voltage of 60V. It is used for overcurrent protection in applications requiring radial terminal placement and disk package shape. This non-linear resistor has a max operating temperature of 85°C and min of -40°C, meeting CUL, TUV, and UL standards.
B72214-S250-K101
The TDK B72214-S250-K101 is a VARISTOR with 25V max circuit RMS voltage and 7J energy absorption. It has radial terminals, operates b/w -40 to 85 °C, and is ideal for surge protection in electronic circuits.
RXEF110K-2
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Terminal Placement: RADIAL; Packing Method: TR; Minimum Operating Temperature: -40 Cel;
TRF250-120UT
TE Connectivity's TRF250-120UT is a PTC resettable fuse with 60V operating voltage and 1W power dissipation. Ideal for temperature sensing applications, it features radial terminal placement in a disk package measuring 6mm x 3.8mm x 10mm. Compliant with CSA, TUV, and UL standards, it operates b/w -40°C to 85°C.
NANOSMDC016F-2
TE Connectivity's NANOSMDC016F-2 is a PTC thermistor with 5 ohm resistance and 0.5 W power dissipation. It features dual-ended terminals, rated for 10 V AC voltage, ideal for overload protection applications. This surface-mount device has a rectangular package and operates up to 85°C temperature.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCP21XV103J03RA
Murata Manufacturing
NCP21XV103J03RA by Murata is a Non-linear Resistor with 10000 ohm resistance, operating voltage of 5 V, and thermal sensitivity index of 3900 K. It is used for temperature sensing applications due to its NTC thermistor type, dual-ended terminal placement, and surface mounting type.
NCP21WF104J03RA
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 100000 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %; Package Style (Meter): SMT;
NCP21XQ102J03RA
NCP21XQ102J03RA by Murata Manufacturing is a non-linear resistor with a resistance of 1000 ohm. It is used for temperature sensing applications and has a thermal sensitivity index of 3650 K. With a max operating temperature of 125 °C, it is suitable for various electronic devices.
NCP21WB473J03RA
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 47000 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %; Length (Package): 2 mm;
NCP21XM221J03RA
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 220 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %; Terminal Finish: Tin (Sn) - with Nickel (Ni) barrier;
NCP21XM472J03RA
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 4700 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %; Height (Package): .8 mm;
NCP21XW153J03RA
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 15000 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %; Width (Package): 1.25 mm;
NCP21XW223J03RA
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 22000 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %; Minimum Operating Temperature: -40 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved