Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LQG15HZ12NJ02D by Murata is a fixed inductor with 0.012 uH nominal inductance, 100 MHz test frequency, and 3000 MHz self-resonance frequency. It is used as an RF inductor for general purpose applications, featuring dual-ended terminals and a compact 0402 rectangular package suitable for surface mount technology.
Median Price
$0.035
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
DigiKey
1+ parts
$0.100
100+ parts
$0.040
1k+ parts
$0.033
10k+ parts
$0.028
Mouser Electronics
$0.041
$0.034
$0.027
Arrow
-
$0.025
Verical
$0.017
Chip1Stop
$0.022
Rutronik
$0.010
Vyrian
Nova Conductors
Corohmni
$0.391
Andel Nordic
$10.204
$9.796
Eastek
Netroflash
Kepictronics
RC Electronics
Allows for easy installation on circuit boards, saving time and effort during assembly.
Provides flexibility in circuit design and allows for better connectivity.
Suitable for high frequency applications, ensuring reliable performance in RF circuits.
Ideal for RF applications and provides the required inductance for circuit operation.
Can handle high currents, making it versatile for various applications.
Surface mount technology offers compact and space-saving design for efficient PCB layout.
Ensures stability at high frequencies, making it suitable for RF applications.
Low resistance ensures efficient power transfer and minimal energy loss.
Fixed Inductors LQG15HZ12NJ02D attributes and parameters. Explore more Fixed Inductors devices from Murata Manufacturing
Inductor Type:
Inductor Application:
Nominal Inductance:
Maximum Rated Current:
Minimum Quality Factor (at L-nom):
DC Resistance:
Tolerance:
No. of Functions:
Self Resonance Frequency:
Test Frequency:
Package Shape:
Case or Size Code:
Shielded:
Surface Mounted:
Minimum Operating Temperature:
Maximum Operating Temperature:
Terminal Position:
Terminal Shape:
Terminal Finish:
No. of Terminals:
Package Style:
Package Length:
Package Height:
Package Width:
Packing Method:
JESD-609 Code:
Reference Standard:
LQG15HZ12NJ02D Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
BSS138
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
2N2222A
Electronic Transistors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
LM358MX
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1554216002
Molex
WIRE AND CABLE;
1N4148WS
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
SMBJ18CA
Multicomp Pro
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;
1554216004
LM358N
Freescale Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LL4148
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358AN
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
ESD5Z5.0T1G
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
M24308/2-1F
Tyco Electronics Amp
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mixed Contacts: NO; Empty Shell: NO;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
C1206C104K5RACTU
KEMET Corporation
KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
OPA2277UA/2K5
Texas Instruments
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
VLF302515MT-2R2M
TDK
VLF302515MT-2R2M by TDK is a shielded, surface mount inductor with 2.2uH nominal inductance and 1.41A max rated current. Ideal for power applications, this general purpose inductor has a compact 1210 size and operates b/w -40°C to 105°C temperature range.
36501J10NJTDG
Tyco Electronics Components
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: YES; Nominal Inductance (L): .01 uH;
HCF1007-3R3-R
Cooper Industries
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 3; Shielded: NO; Surface Mount: YES; Terminal Shape: WRAPAROUND;
XAL1010-153MEB
Coilcraft
Coilcraft's XAL1010-153MEB is a shielded, surface mount fixed inductor with 15uH nominal inductance and 13.8A max rated current. Ideal for power applications, it operates b/w -40 to 125°C and features a self-resonance frequency of 9MHz.
BDCD002016101R0MS1
Chilisin Electronics
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
5543
Amecon
GENERAL PURPOSE INDUCTOR; Inductor Application: DC-DC CONVERTER; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Maximum Rated Current: 10 A;
DR74-100-R
Eaton Corporation
Eaton Corporation's DR74-100-R is a shielded, dual-ended fixed inductor with 10uH nominal inductance. Ideal for power applications, it has a max rated current of 2.41A and operates b/w -40°C to 125°C. This SMT inductor features matte tin over nickel terminal finish and ferrite core material in a compact 7.6mm package size.
SRN2512-1R0M
Bourns
Bourns SRN2512-1R0M is a shielded, surface mount fixed inductor with 1uH nominal inductance and 3.5A max rated current. Ideal for power applications, it operates b/w -55 to 125°C with a self-resonance frequency of 120MHz.
7447709680
Wuerth Elektronik & Kg
7447709680 by Wurth Elektronik is a surface mount, shielded fixed inductor with a nominal inductance of 68 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 3.2 A and an operating temperature range from -40 to 125 °C.
XAL4020-102MEC
Coilcraft XAL4020-102MEC is a shielded, surface mount inductor with 1uH nominal inductance and 9.6A max rated current. Ideal for power applications, it has a self-resonance frequency of 79MHz and operates b/w -40°C to 125°C.
5511
GENERAL PURPOSE INDUCTOR; Inductor Application: DC-DC CONVERTER; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Shape or Size Description: RECTANGULAR PACKAGE;
LQW15AN6N2C00D
Murata Manufacturing
Murata Manufacturing's LQW15AN6N2C00D is a wirewound chip inductor with 0.0062 uH nominal inductance, 8000 MHz self-resonance frequency, and 3.23% tolerance. Ideal for RF applications due to its high Q factor at 250 MHz test frequency. Surface mount design with dual-ended terminals makes it suitable for compact electronic devices.
LQM21PHR47NG0D
Murata Manufacturing's LQM21PHR47NG0D is an 0805 SMT fixed inductor with 0.47uH nominal inductance, 1.3A max current, and -55 to 150°C operating temp. Ideal for power applications, it features dual-ended terminals and ferrite core material.
U05-3
Torotel Products
The Torotel Products U05-3 is a shielded RF inductor with 20000 uH nominal inductance, 1.23 ohm DC resistance, and operates b/w -55 to 85 °C. It features radial terminal placement, molybdenum permalloy core material, and circular package shape. Ideal for general purpose applications requiring precise inductance values at 0.001 MHz test frequency.
LBM2016TR82J
Taiyo Yuden
LBM2016TR82J by Taiyo Yuden is a surface mount fixed inductor with 0.82 uH nominal inductance, suitable for RF applications. It features dual-ended terminals, operates at -40 to 105 °C, and has a max rated current of 0.39 A. Ideal for general purpose use with a self-resonance frequency of 250 MHz.
SRN3015-6R8M
Bourns SRN3015-6R8M is a shielded, surface mount fixed inductor with 6.8uH nominal inductance and 1.1A max rated current. Ideal for power applications, it features a self-resonance frequency of 50MHz and operates b/w -40°C to 125°C temperature range.
B82477G4472M000
B82477G4472M000 by TDK is a shielded, surface mount fixed inductor with 4.7uH nominal inductance and 6.8A max rated current. Ideal for power applications, it operates b/w -55 to 125°C and features a ferrite core material.
74477110
Wurth Elektronik 74477110 is a shielded fixed inductor with dual-ended terminals. It has a nominal inductance of 10uH, max rated current of 5A, and operates b/w -40 to 125°C. Ideal for power applications, this general purpose inductor features a ferrite core and WRAPAROUND terminal shape.
DR127-1R0-R
PE-53117NL
Pulse Electronics
PE-53117NL by Pulse Electronics is a general purpose inductor with 292uH nominal inductance, 0.15 ohm DC resistance, and 20% tolerance. It is a dual-ended fixed inductor for PCB mount applications, featuring rectangular construction suitable for operating temperatures from -40 to 130°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LQG15HN3N9S02D
Murata Manufacturing's LQG15HN3N9S02D is a fixed inductor with 0.0039 uH nominal inductance, 6000 MHz self-resonance frequency, and 8 min quality factor. It is a general-purpose RF inductor for applications requiring high-frequency performance and compact size, suitable for surface mount designs with dual-ended terminals.
LQG15HN2N2S02D
Murata Manufacturing's LQG15HN2N2S02D is a 0402-sized fixed inductor with 0.0022 uH nominal inductance, suitable for RF applications. Featuring dual-ended terminals and matte tin finish, it operates b/w -55 to 125 °C with max current of 0.9 A. With self-resonance frequency at 6000 MHz and quality factor of 8, it is a general-purpose chip inductor ideal for compact SMT designs.
LQG15HN4N7S02D
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: NO; Surface Mount: YES;
LQG15HS27NJ02D
LQG15HS27NJ02D by Murata is a 0402-sized multilayer chip inductor with 0.027 uH nominal inductance, suitable for RF applications. It has a max operating temperature of 125°C, self-resonance frequency of 1700 MHz, and DC resistance of 0.46 ohm. Ideal for general purpose use, this SMT inductor features dual-ended terminals with matte tin finish.
LQG15HS10NJ02D
LQG15HN1N0S02D
LQG15HN9N1J02D
LQG15HS15NJ02D
Murata Manufacturing's LQG15HS15NJ02D is a 0402-sized fixed inductor with 0.015 uH nominal inductance, suitable for RF applications. Featuring dual-ended terminals and matte tin finish over nickel, it operates b/w -55 to 125 °C with max current of 0.45 A. This general purpose inductor has a self-resonance frequency of 2500 MHz and min quality factor of 8 at L-nom.
LQG15HN4N3S02D
LQG15HN15NJ02D
LQG15HS22NJ02D
LQG15HS22NJ02D by Murata is a 0402-sized fixed inductor with 0.022 uH nominal inductance, suitable for RF applications. Featuring dual-ended terminals and wraparound shape, it operates at -55 to 125 °C with a max rated current of 0.35 A. This general purpose inductor has a self-resonance frequency of 1900 MHz and min quality factor of 8.
LQG15HSR10J02D
LQG15HN12NJ02D
LQG15HS47NJ02D
LQG15HS2N7S02D
LQG18HN15NJ00D
LQG15HS3N9S02D
LQG18HN3N9S00D
LQG15HN18NJ02D
LQG15HN18NJ02D by Murata Manufacturing is a surface mount fixed inductor with dual-ended terminal placement. It has a nominal inductance of 0.018 uH and can operate at temperatures up to 125 °C. This general purpose inductor is commonly used in RF applications.
LQG18HN1N2S00D
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved