Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's DFE252012F-4R7M=P2 is a shielded, surface mount fixed inductor with 4.7uH nominal inductance and 1.5A max rated current. Ideal for power applications, it operates b/w -40 to 125°C, featuring a compact rectangular package (2.5mm x 2mm x 1.2mm).
Median Price
$0.134
Lifecycle Status
Suppliers In-Stock
24
In-Stock Inventory
1k+
Newark
1+ parts
$0.086
100+ parts
1k+ parts
10k+ parts
-
DigiKey
$0.240
$0.165
$0.135
$0.115
Mouser Electronics
$0.136
$0.109
Future Electronics
$0.108
Arrow
Verical
TTI
$0.126
RS (Exports)
$0.222
Farnell
$0.252
$0.233
$0.214
Element14
$0.235
$0.221
$0.207
Chip1Stop
Nova Conductors
$0.142
Maritex
$0.117
$0.098
Chip Stock
IBS Electronics
$0.151
NAC Semi
$0.220
Vyrian
SPM Sales
A&K Electronics
Rotakorn
Bristol Electronics
Elcom Components
Sensible Micro Corp
Prism Electronics
Argo Parts USA
$0.138
Bastille Electronics
$0.128
Continental Prestige Electronics
$0.201
$0.187
$0.172
$0.158
Corohmni
$0.880
Authorized Procurement Solutions
Perfect Parts
Robosynatics
$0.092
$0.090
Lucentia Tech
Kepictronics
Allows for easy and efficient mounting on PCBs, saving space and simplifying assembly process.
Provides protection from electromagnetic interference, ensuring stable and reliable performance in various applications.
Allows for flexibility in connections and circuit design.
Provides an ideal inductance value for power applications, offering efficient energy storage and transfer capabilities.
Can handle relatively high currents, making it suitable for power electronics applications.
Ensures reliable performance in a wide range of temperature environments, even in extreme conditions.
Offers high magnetic permeability and low core losses, enhancing the inductor's performance efficiency.
Fixed Inductors DFE252012F-4R7M=P2 attributes and parameters. Explore more Fixed Inductors devices from Murata Manufacturing
Inductor Type:
Inductor Application:
Nominal Inductance:
Maximum Rated Current:
DC Resistance:
Tolerance:
No. of Functions:
Test Frequency:
Package Shape:
Case or Size Code:
Shielded:
Construction:
Core Material:
Surface Mounted:
Minimum Operating Temperature:
Maximum Operating Temperature:
Terminal Position:
Terminal Shape:
No. of Terminals:
Package Style:
Package Length:
Package Height:
Package Width:
Packing Method:
DFE252012F-4R7M=P2 Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
2N2222A
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138DW-7-F
Diodes Incorporated
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
SMBJ18CA
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
BSS138
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
CRCW06030000Z0EAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.
BAV99
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
LM107H
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
MMBT3904LT1G
Onsemi
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
KSZ9031RNXIA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
LM317BD2TG
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
1N4148
Leshan Radio
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99WT1G
Fairchild Semiconductor
2N7002-T1-E3
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
B82731T2102A020
TDK
B82731T2102A020 by TDK is a fixed inductor with 10000 uH nominal inductance, 0.63 ohm DC resistance, and 1 A max rated current. It is a power inductor for PCB mount applications, featuring dual in-line terminal placement and ferrite core material. Operating temperature ranges from -40 to 125 °C.
B82464G4333M000
TDK's B82464G4333M000 is a shielded, surface mount fixed inductor with 33uH nominal inductance and 1.85A max rated current. Ideal for power applications, it operates b/w -55 to 150°C and features a ferrite core in a compact rectangular package.
77A-100M-00
Fastron Electronics
77A-100M-00 by Fastron Electronics is a general purpose inductor with 10uH nominal inductance, 0.042 ohm DC resistance, and 5A max rated current. It is used for various applications requiring a fixed inductor with tubular construction and ferrite core material.
NRS4018T6R8MDGJ
Taiyo Yuden
Taiyo Yuden's NRS4018T6R8MDGJ is a fixed inductor with 6.8uH nominal inductance, 1.45A max current, and 30MHz self-resonance freq. Ideal for power applications, it features dual-ended terminals, SMT package style, and ferrite core material.
33457
GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Maximum Rated Current: 52.8 A; JESD-609 Code: e3;
DRA127-151-R
Cooper Industries
GENERAL PURPOSE INDUCTOR; Inductor Application: DC-DC CONVERTER; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
NRS4018T220MDGJV
Taiyo Yuden's NRS4018T220MDGJV is a surface mount fixed inductor with 22uH nominal inductance, 0.72A max rated current, and 125°C max operating temp. Ideal for power applications, this general purpose inductor features ferrite core material and dual-ended terminals for efficient performance.
DR74-4R7-R
Cooper Electronic Technologies
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
HC3
Lcr Capacitors (Eu)
HC3 by Lcr Capacitors (Eu) is a fixed inductor with 1000uH nominal inductance, 25A max rated current, and 60°C max operating temp. Ideal for high current applications, it features radial terminal placement and flexible lead shape in a rectangular package.
B82464-G4103-M
The TDK B82464-G4103-M is a shielded, dual-ended fixed inductor with 10uH nominal inductance and 3.4A max rated current. Ideal for power applications, it operates b/w -55 to 125°C, featuring a self-resonance frequency of 22MHz and DC resistance of 0.03 ohm.
SRN6045-2R2Y
Bourns
Bourns SRN6045-2R2Y is a shielded, surface mount fixed inductor with 2.2uH nominal inductance and 3.5A max rated current. Ideal for power applications, it operates b/w -40 to 125°C with a self-resonance frequency of 35MHz.
3615A100K
TE Connectivity
TE Connectivity's 3615A100K is a surface mount fixed inductor with dual-ended terminals, ideal for RF applications. It offers a nominal inductance of 10uH, max operating temperature of 100°C, and self-resonance frequency of 42MHz. This general-purpose inductor has a compact rectangular package measuring 13mm x 5mm x 5.3mm.
NR4018T2R2M
Taiyo Yuden's NR4018T2R2M is a shielded fixed inductor with 2.2uH nominal inductance, suitable for power applications. With a max rated current of 1.44A and self-resonance frequency of 52MHz, it operates b/w -25°C to 120°C. This SMT inductor features dual-ended terminals and ferrite core construction in a compact 4x4mm package.
B82464A4105K000
The TDK B82464A4105K000 is a surface mount fixed inductor with 1000uH nominal inductance, suitable for power applications. It has a max operating temperature of 150°C and can handle a rated current of 0.33A. This general purpose inductor features dual-ended terminals and L bend shape, making it ideal for various electronic circuits.
ELGTEAR47NA
Panasonic
Panasonic ELGTEAR47NA is a shielded, surface mount fixed inductor with 0.47uH nominal inductance and 1.2A max rated current. Ideal for power applications, it has dual-ended terminals, operates b/w -40 to 125 °C, and features a self-resonance frequency of 126 MHz.
33465
Hirel Systems
GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Shape or Size Description: RECTANGULAR PACKAGE; Nominal Inductance (L): 88.2 uH;
VLS3012HBX-2R2M
VLS3012HBX-2R2M by TDK is a shielded, dual-ended fixed inductor with 2.2uH nominal inductance and 105°C max operating temp. Ideal for power applications, it has a metal core construction, 2.84A max rated current, and compact SMT package size of 3x3x1.2mm.
B82472G4104M000
The TDK B82472G4104M000 is a shielded, surface mount fixed inductor with 100uH nominal inductance. It operates b/w -55°C to 125°C, with a max rated current of 0.56A. Ideal for power applications requiring a general purpose inductor in a compact rectangular package.
CM322522-220KL
The Bourns CM322522-220KL is a surface mount fixed inductor with a nominal inductance of 22 uH. It is a general purpose inductor suitable for RF applications, with a max operating temperature of 125 °C and max rated current of 0.11 A.
XAL5030-222MEB
Coilcraft
Coilcraft XAL5030-222MEB is a shielded, surface mount inductor with 2.2uH nominal inductance and 9.7A max rated current. Ideal for power applications, it operates b/w -40 to 125°C, featuring a self-resonance frequency of 38MHz and AEC-Q200 reference standard compliance.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DFE252012F-1R0M=P2
Toko
Murata Manufacturing
Murata Manufacturing's DFE252012F-1R0M=P2 is a shielded, surface mount fixed inductor with 1uH nominal inductance and 3.3A max rated current. Ideal for power applications, it operates b/w -40°C to 125°C and features a compact rectangular package (2.5mm x 2mm x 1.2mm).
DFE252012P-2R2M=P2
Murata Manufacturing's DFE252012P-2R2M=P2 is a shielded, surface mount fixed inductor with 2.2uH nominal inductance and 2.2A max rated current. Ideal for power applications, it has a compact rectangular package measuring 2.5mm x 2mm x 1.2mm, operating b/w -40°C to 125°C efficiently at a test frequency of 1MHz.
GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Shielded: YES; Surface Mount: YES; Shape or Size Description: RECTANGULAR PACKAGE; Core Material: IRON;
DFE252012P-1R0M=P2
Murata Manufacturing's DFE252012P-1R0M=P2 is a shielded, surface mount fixed inductor with 1uH nominal inductance and 3.2A max rated current. Ideal for power applications, it operates b/w -40°C to 125°C and features a compact rectangular package (2.5mm x 2mm x 1.2mm).
GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Shielded: YES; Surface Mount: YES; Shape or Size Description: RECTANGULAR PACKAGE; Maximum Operating Temperature: 125 Cel;
DFE252012P-4R7M=P2
GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Shielded: YES; Surface Mount: YES; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 125 Cel;
DFE201612E-2R2M=P2
DFE201612E-R47M=P2
DFE252012PD-R47M=P2
GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES; Minimum Operating Temperature: -40 Cel;
DFE201610E-2R2M=P2
DFE201610E-1R0M=P2
Murata's DFE201610E-1R0M=P2 is a shielded, dual-ended SMT inductor with 1uH nominal inductance. Operating b/w -40 to 125°C, it has a max rated current of 2.7A making it ideal for power applications. With a compact size of 2x1.6x1mm, this general-purpose inductor suits various electronic devices.
DFE201610P-2R2M=P2
Murata Manufacturing's DFE201610P-2R2M=P2 is a shielded, surface mount fixed inductor with 2.2uH nominal inductance and 1.4A max rated current. Ideal for power applications, it has dual-ended terminals and operates b/w -40 to 125°C.
DFE201610P-1R5M=P2
Murata Manufacturing's DFE201610P-1R5M=P2 is a shielded, surface mount fixed inductor with 1.5uH nominal inductance and 1.8A max rated current. Ideal for power applications, this general purpose inductor has a compact rectangular package measuring 2mm x 1.6mm x 1mm and operates b/w -40°C to 125°C.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved