Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's DFE201610E-R47M=P2 is a shielded, dual-ended fixed inductor with 0.47uH nominal inductance. Ideal for power applications, it has a max rated current of 3.6A and operates b/w -40 to 125°C. Its compact SMT package measures 2mm x 1.6mm x 1mm, making it suitable for various general-purpose inductor needs.
Median Price
$0.176
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.240
100+ parts
$0.165
1k+ parts
$0.136
10k+ parts
$0.109
DigiKey
$0.135
$0.115
Newark
$0.380
$0.245
$0.146
-
Chip1Stop
$0.097
$0.072
$0.063
Future Electronics
$0.108
Arrow
Verical
TTI
$0.104
Farnell
$0.180
$0.138
$0.123
Element14
$0.163
$0.133
RS (Exports)
Nova Conductors
$0.169
Chip Stock
Bristol Electronics
LIBRA Elektronik GmbH
Vyrian
Rotakorn
IBS Electronics
$0.151
Prism Electronics
Cyclops Electronics Ltd
Continental Prestige Electronics
$0.166
Argo Parts USA
$0.164
Netroflash
$0.161
$0.158
Aztec Data Supply Inc.
$0.329
Corohmni
$0.613
Modulus Dynamics
$0.914
QUARKTWIN TECHNOLOGY LTD
Computer Components Inc. - USA
Glotronic Ltd.
Authorized Procurement Solutions
Kepictronics
Assy Fe
Perfect Parts
Surface mount capability allows for easy and convenient installation on PCBs, saving time and effort.
Shielding helps reduce electromagnetic interference, ensuring optimal performance in sensitive electronic applications.
Dual ended terminal placement provides flexibility in circuit design and allows for easy connection to other components.
Ideal nominal inductance value suitable for power inductor applications, offering efficient energy storage and transfer.
High maximum rated current allows for reliable operation under heavy load conditions, ensuring stability and performance.
General purpose inductor suitable for a wide range of applications, providing versatility and compatibility for various circuit designs.
Fixed Inductors DFE201610E-R47M=P2 attributes and parameters. Explore more Fixed Inductors devices from Murata Manufacturing
Inductor Type:
Inductor Application:
Nominal Inductance:
Maximum Rated Current:
DC Resistance:
Tolerance:
No. of Functions:
Test Frequency:
Package Shape:
Case or Size Code:
Shielded:
Construction:
Core Material:
Surface Mounted:
Minimum Operating Temperature:
Maximum Operating Temperature:
Terminal Position:
Terminal Shape:
No. of Terminals:
Package Style:
Package Length:
Package Height:
Package Width:
Packing Method:
DFE201610E-R47M=P2 Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
2N2222A
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
Fairchild Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
BAV99
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
06035C104KAT2A
KYOCERA AVX
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
DS18B20U
Maxim Integrated
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
Leshan Radio
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
Wuxi Xuyang Electronic
BAV99W-7-F
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
SS14
Jinan Jingheng Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
CL31B104KBCNNNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
B82791H2351N001
TDK
B82791H2351N001 by TDK is a fixed inductor with 22000 uH nominal inductance, 1.9 ohm DC resistance, and 0.35 A max rated current. Ideal for power applications, it features a rectangular package with dual in-line terminals suitable for PCB mounting. Operating temperature ranges from -40 to 125 °C.
DR127-150-R
Cooper Industries
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
B82477R4683M100
B82477R4683M100 by TDK is a surface mount, shielded fixed inductor with dual-ended terminal placement. It has a nominal inductance of 68 uH and can handle a max rated current of 2.8 A. This general purpose inductor is commonly used for power applications due to its high operating temperature range and low DC resistance.
DR73-101-R
Cooper Electronic Technologies
IHLP2020CZER5R6M11
Vishay Intertechnology
Vishay Intertechnology's IHLP2020CZER5R6M11 is a shielded, high current inductor with 5.6uH nominal inductance and 4.2A max rated current. Ideal for general purpose applications, this SMT inductor features a self-resonance frequency of 21MHz and operates b/w -55°C to 125°C.
LQH32PHR47NN0L
Murata Manufacturing
Murata Manufacturing's LQH32PHR47NN0L is a shielded, surface mount fixed inductor with 0.47uH nominal inductance. With 2.55A max rated current and -40 to 125°C operating temperature range, it's ideal for power applications requiring general purpose inductors. The compact 1210 size package makes it suitable for various SMT designs.
DR74-4R7-R
Coiltronics
XFL4020-332MEB
Coilcraft
XFL4020-332MEB by Coilcraft is a surface mount, shielded fixed inductor with a nominal inductance of 3.3 uH and max rated current of 5.2 A. It is commonly used as a power inductor in general purpose applications.
7447709101
Wuerth Elektronik & Kg
Wurth Elektronik 7447709101 is a shielded, dual-ended SMT inductor with 100uH nominal inductance. Ideal for power applications, it has a max rated current of 2.5A and operates b/w -40 to 125°C.
IHLP3232CZERR22M01
Vishay Intertechnology's IHLP3232CZERR22M01 is a shielded, high current inductor with 0.22 uH nominal inductance and 32 A max rated current. Ideal for general purpose applications, this SMT inductor has a self-resonance frequency of 104 MHz and operates b/w -55 to 125 °C.
DR125-102-R
CB2012T100MR
Taiyo Yuden
CB2012T100MR by Taiyo Yuden is an 0805 fixed inductor with a nominal inductance of 10uH, suitable for power applications. It has a max operating temperature of 105°C and a DC resistance of 0.65 ohm, making it ideal for general purpose use. With dual-ended terminals and wraparound shape, this SMT inductor offers reliable performance at a self-resonance frequency of 32MHz.
NRS4018T4R7MDGJV
Taiyo Yuden's NRS4018T4R7MDGJV is a fixed inductor with 4.7uH nominal inductance, 1.7A max rated current, and 35MHz self-resonance frequency. Ideal for power applications, it features a ferrite core, operates b/w -40 to 125 °C, and has dual-ended terminals for SMT installation.
DR125-470-R
Eaton Corporation
Eaton Corporation's DR125-470-R is a shielded, surface mount fixed inductor with 47uH nominal inductance. It has a max rated current of 2.71A and operates b/w -40 to 125°C. Ideal for power applications, this general purpose inductor features dual-ended terminals and ferrite core material.
2312-H-RC
Bourns
The Bourns 2312-H-RC is a shielded fixed inductor with 100uH nominal inductance, suitable for high current applications. It has a max rated current of 7A, DC resistance of 0.037 ohm, and operates b/w -55 to 105°C. Ideal for general purpose use due to its radial terminal placement and toroidal package style.
SRN6045-150M
Bourns SRN6045-150M is a shielded, surface mount fixed inductor with 15uH nominal inductance and 1.9A max rated current. Ideal for power applications, it operates b/w -40 to 125°C with a self-resonance frequency of 13MHz.
B78108S1105J000
B78108S1105J000 by TDK is a tubular fixed inductor with 1000uH nominal inductance, suitable for RF applications. It has a max operating temperature of 125°C and a max rated current of 0.13A. With a Q factor measured at 0.252MHz, this general purpose inductor offers high quality performance in compact axial package style.
NRS4018T220MDGJ8
NRS4018T220MDGJ8 by Taiyo Yuden is a fixed inductor with 22uH nominal inductance, 0.29 ohm DC resistance, and 15 MHz self-resonance frequency. It is a power inductor designed for general purpose applications, featuring dual-ended terminals and shielded construction. Ideal for SMT mounting with a compact size of 4x4x1.8mm, it operates b/w -40°C to 125°C with a max rated current of 0.72A.
CIGT201610EHR47MNE
Samsung Electro-mechanics' CIGT201610EHR47MNE is a surface mount fixed inductor with dual-ended terminals. It has a nominal inductance of 0.47uH, max rated current of 4.8A, and operates b/w -40 to 125°C. Ideal for power applications due to its general purpose design and metal composite core material.
IHLP1212ABERR47M11
Vishay Intertechnology's IHLP1212ABERR47M11 is a shielded, high current inductor with 0.47uH nominal inductance and 6.4A max rated current. Ideal for general purpose applications, this SMT fixed inductor has a DC resistance of 0.0195 ohm and operates b/w -55°C to 125°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DFE252012F-1R0M=P2
Toko
Murata Manufacturing's DFE252012F-1R0M=P2 is a shielded, surface mount fixed inductor with 1uH nominal inductance and 3.3A max rated current. Ideal for power applications, it operates b/w -40°C to 125°C and features a compact rectangular package (2.5mm x 2mm x 1.2mm).
DFE252012P-2R2M=P2
Murata Manufacturing's DFE252012P-2R2M=P2 is a shielded, surface mount fixed inductor with 2.2uH nominal inductance and 2.2A max rated current. Ideal for power applications, it has a compact rectangular package measuring 2.5mm x 2mm x 1.2mm, operating b/w -40°C to 125°C efficiently at a test frequency of 1MHz.
GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Shielded: YES; Surface Mount: YES; Shape or Size Description: RECTANGULAR PACKAGE; Core Material: IRON;
DFE252012P-1R0M=P2
Murata Manufacturing's DFE252012P-1R0M=P2 is a shielded, surface mount fixed inductor with 1uH nominal inductance and 3.2A max rated current. Ideal for power applications, it operates b/w -40°C to 125°C and features a compact rectangular package (2.5mm x 2mm x 1.2mm).
GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Shielded: YES; Surface Mount: YES; Shape or Size Description: RECTANGULAR PACKAGE; Maximum Operating Temperature: 125 Cel;
DFE252012P-4R7M=P2
GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Shielded: YES; Surface Mount: YES; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 125 Cel;
DFE201612E-2R2M=P2
DFE201612E-R47M=P2
DFE252012PD-R47M=P2
GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES; Minimum Operating Temperature: -40 Cel;
DFE201610E-2R2M=P2
DFE201610E-1R0M=P2
Murata's DFE201610E-1R0M=P2 is a shielded, dual-ended SMT inductor with 1uH nominal inductance. Operating b/w -40 to 125°C, it has a max rated current of 2.7A making it ideal for power applications. With a compact size of 2x1.6x1mm, this general-purpose inductor suits various electronic devices.
DFE201610P-2R2M=P2
Murata Manufacturing's DFE201610P-2R2M=P2 is a shielded, surface mount fixed inductor with 2.2uH nominal inductance and 1.4A max rated current. Ideal for power applications, it has dual-ended terminals and operates b/w -40 to 125°C.
DFE201610P-1R5M=P2
Murata Manufacturing's DFE201610P-1R5M=P2 is a shielded, surface mount fixed inductor with 1.5uH nominal inductance and 1.8A max rated current. Ideal for power applications, this general purpose inductor has a compact rectangular package measuring 2mm x 1.6mm x 1mm and operates b/w -40°C to 125°C.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved