Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata's BLA31BD102SN4D is a FERRITE CHIP filter with 4 functions and 8 terminals. With a max operating temp of 125°C and min of -55°C, it has a DC resistance of 0.55 ohm. Ideal for data line filtering applications due to its compact size (L3.2XB1.6XH0.8 mm) and output impedance of 1000 OHM at 0.05 A rated current.
Median Price
$0.293
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.920
100+ parts
$0.429
1k+ parts
$0.323
10k+ parts
$0.273
DigiKey
$0.940
$0.442
$0.334
-
Verical
$0.199
Future Electronics
$0.545
Arrow
$0.186
Chip1Stop
$0.291
RS (Exports)
$0.265
Nova Conductors
$0.288
Maritex
$0.412
TME
$0.530
$0.227
$0.147
Rutronik
$0.178
Component Sense
VNN
Legend Electronics Inc.
IBS Electronics
$0.206
NAC Semi
$0.314
Sensible Micro Corp
Vyrian
PC Components Company LLC
Bristol Electronics
Semicontronic
$0.150
$0.146
Corohmni
$0.191
Argo Parts USA
$0.226
$0.219
Continental Prestige Electronics
$0.221
Aztec Data Supply Inc.
$3.320
Authorized Procurement Solutions
iodParts Technologies Inc.
Netroflash
$0.282
$0.274
$0.268
Having 4 functions allows for more comprehensive filtering and noise suppression, making this product suitable for a wide range of applications.
With 8 terminals, this filter offers versatile connectivity options and can accommodate various circuit configurations.
Ferrite chip filters are known for their high performance in attenuating electromagnetic interference (EMI) and radio frequency interference (RFI), ensuring reliable signal integrity.
With a high maximum operating temperature of 125C, this filter can withstand demanding environmental conditions and maintain stable performance.
The low minimum operating temperature of -55C ensures that this filter remains functional even in cold environments, enhancing its reliability.
Tin terminal finish provides good conductivity, corrosion resistance, and solderability, ensuring secure connections in electronic circuits.
The narrow width of 1.6mm saves space when mounting this filter on a circuit board, making it suitable for compact electronic devices.
Low DC resistance of 0.55 ohm minimizes power losses in the circuit and ensures efficient signal transmission through the filter.
The compact length of 3.2mm allows for easy integration of this filter into the circuit layout without taking up much space.
With an output impedance of 1000 ohms, this filter helps match impedance levels in the circuit, reducing reflections and signal distortion.
The tape packing method facilitates automated assembly processes, saving time and ensuring consistent quality when integrating this filter into electronic devices.
The surface mounting type offers easy and secure installation on a circuit board, making this filter suitable for high-volume production and miniaturized designs.
Compact dimensions of 3.2x1.6x0.8mm (0.126x0.063x0.031 inch) make this filter suitable for small electronic devices where space is limited.
With a rated current of 0.05A, this filter can handle moderate power levels in the circuit without overheating or performance degradation.
The low profile height of 0.8mm allows for a slim and space-efficient design, making this filter ideal for applications where component height is a constraint.
Data Line Filters BLA31BD102SN4D attributes and parameters. Explore more Data Line Filters devices from Murata Manufacturing
Additional Features:
Maximum DC Resistance:
Filter Type:
Height:
JESD-609 Code:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Dimensions:
Rated Current:
Terminal Finish:
Width (mm):
BLA31BD102SN4D Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
M39029/58-360
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
1N4148
Unitrode
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ESD5Z5.0T1G
Onsemi
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
BAV99
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRS1100T3G
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
SN65HVD230DR
Texas Instruments
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;
SMBJ18CA
Thinking Electronic Industrial
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
PIC18F4550T-I/PT
Microchip Technology
The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.
LM358DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
BSS123-7-F
Diodes Incorporated
BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
Crimson Semiconductor
TE Connectivity
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
PA4339.132NLT
Pulse Electronics
PA4339.132NLT by Pulse Electronics is a Data Line Filter with 2 functions, AEC-Q200 screening level, and 80V rated voltage. It has an inductance of 9uH and operates b/w -40 to 125 °C. Ideal for applications requiring a surface mount filter with a max current rating of 2.5A.
DLP11TB800UL2L
Murata Manufacturing
Murata Manufacturing's DLP11TB800UL2L is a Data Line Filter with 2 functions, rated at 5V. It offers a max operating temperature of 85°C and min insulation resistance of 100 Mohm. Ideal for applications requiring filtering in data lines with dimensions of L1.25xB1.0xH0.3mm.
NFE61HT102F2A9L
Murata Manufacturing's NFE61HT102F2A9L is a Data Line Filter with 1000 Mohm Min Insulation Resistance, AEC-Q200 Screening Level, and 100 V Rated Voltage. It is ideal for applications requiring noise suppression in data lines, offering a compact size of L6.8xB1.6xH1.6 mm and rated current of 2 A.
MPZ2012S102JTD25
TDK
The TDK MPZ2012S102JTD25 is a FERRITE CHIP data line filter with 2 terminals, AEC-Q200 screening. It has a max operating temp of 125°C, min of -55°C, and DC resistance of 0.15 ohm. Ideal for automotive applications due to its high output impedance of 1000 OHM and rated current of 1.5 A.
NFM41CC222R2A3L
Murata's NFM41CC222R2A3L is a data line filter with 100V rated voltage, 2200uF capacitance, and -55 to 125°C operating temperature range. It features FEED THROUGH CAPACITOR type and is ideal for applications requiring high insulation resistance and surface mounting type.
BLM15PX601SN1D
Murata Manufacturing's BLM15PX601SN1D is a FERRITE CHIP data line filter with 0.5mm width, 1mm length, and 0.5mm height. It has a max DC resistance of 0.23 ohm and an output impedance of 600 ohm, suitable for surface mount applications in electronics to manage interference on data lines.
MMZ1005A222ET000
TDK MMZ1005A222ET000 is a chip bead data line filter with 2 terminals. It offers a max DC resistance of 2.2 ohm and an output impedance of 2200 ohm, suitable for surface mount applications in electronics to suppress electromagnetic interference.
744222
Wuerth Elektronik & Kg
Wurth Elektronik 744222 is a UL-approved data line filter with 2 functions, rated at 80V. With inductance of 1000uH and max DC resistance of 0.31 ohm, it operates b/w -40 to 125 °C. Ideal for applications requiring a surface mount filter with dimensions L9.2XB6.0XH5.0mm, such as electronic devices needing noise suppression on data lines.
FBMJ2125HM330-T
Taiyo Yuden
Taiyo Yuden's FBMJ2125HM330-T is an 0805 chip bead filter with 2 terminals. It operates b/w -40 to 85°C, offering a DC resistance of 0.008 ohm and output impedance of 33Ω at a frequency range of 100 MHz. Ideal for data line filtering applications, it has dimensions of L2.0xB1.25xH0.85 mm and can handle a rated current of 4A in surface mount installations.
P0502NLT
Pulse Electronics P0502NLT is a Data Line Filter with 2 functions, AEC-Q200 screening. It has inductance of 470uH, max operating temp of 120°C, and rated current of 14A. Ideal for automotive applications due to its surface mounting type and compact dimensions (L30.99xB25.4xH12.7 mm).
BLM18KG601SN1D
Murata Manufacturing's BLM18KG601SN1D is a chip bead data line filter with 2 terminals, FERRITE CHIP type, and 0.8mm width. Operating b/w -55 to 125 °C, it has a DC resistance of 0.15 ohm and output impedance of 600 OHM. Ideal for surface mount applications in electronics for noise suppression at frequencies ranging from 100 MHz.
BLM31PG601SN1B
Murata Manufacturing's BLM31PG601SN1B is a chip bead data line filter with 2 terminals, rated for 1.5A current and 600 ohm output impedance. It operates b/w -55°C to 125°C, suitable for applications requiring noise suppression in the frequency range of 100 MHz.
NVT4858HKZ
DATA LINE FILTER;
NFM18CC101R1C3D
Murata Manufacturing's NFM18CC101R1C3D is a data line filter with 1000 Mohm insulation resistance, 16V rated voltage, and 100uF capacitance. Ideal for applications requiring FEED THROUGH CAPACITOR filters in surface mount configurations.
FBMH3225HM601NT
Taiyo Yuden's FBMH3225HM601NT is a chip bead data line filter with 2 terminals. It operates b/w -40 to 85°C, offering 600 OHM impedance at 100 MHz. Ideal for surface mount applications, it measures L3.2xB2.5xH2.5 mm and has a max DC resistance of 0.042 ohm.
FBMH4532HM681-T
FBMH4532HM681-T by Taiyo Yuden is a chip bead data line filter with 1 function. It has a max operating temperature of 125°C and a min frequency of 100 MHz. This filter is commonly used in applications requiring noise suppression in electronic circuits.
MPZ2012S331A
The TDK MPZ2012S331A is an 0805 chip bead data line filter with a max operating temperature of 125°C and min frequency of 100 MHz. With a DC resistance of 0.05 ohm, it offers an output impedance of 330 OHM, making it ideal for surface mount applications in electronic devices requiring noise suppression and signal filtering.
FLT007A0-SRZ
Ge Industrial Solutions
DATA LINE FILTER MODULE; Maximum DC Resistance: .025 ohm; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Approvals (V): CSA; EN; UL; VDE; Height: 12.2 mm;
BLM21PG221SN1J
Murata Manufacturing's BLM21PG221SN1J is an 0805 chip bead filter with 2 terminals, operating from -55 to 125 °C. With a width of 1.25mm and length of 2mm, it offers an output impedance of 220 ohm for data line filtering applications at frequencies ranging from 100 MHz.
744227
Wurth Elektronik 744227 is a UL-approved data line filter with 2 functions, rated at 80V and inductance of 51uH. Ideal for applications requiring surface mount filters with dimensions of L9.2xB6.0xH5.0mm, it operates b/w -40°C to 125°C and has a max DC resistance of 0.16 ohm.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BLA31BD601SN4D
Murata Manufacturing's BLA31BD601SN4D is a FERRITE CHIP filter with 4 functions and 8 terminals. With dimensions of L3.2XB1.6XH0.8 (mm), it has a max operating temperature of 125°C and min of -55°C. Ideal for data line filtering applications, it offers a max DC resistance of 0.45 ohm and output impedance of 600 OHM at a rated current of 0.1 A.
BLA31AG601SN4D
Murata Manufacturing's BLA31AG601SN4D is a Ferrite Chip Data Line Filter with 4 functions and 8 terminals. It has a max operating temperature of 125°C, DC resistance of 0.35 ohm, and output impedance of 600 ohm. Ideal for surface mount applications in electronics to reduce electromagnetic interference.
BLA31AG102SN4D
Murata Manufacturing's BLA31AG102SN4D is a FERRITE CHIP filter with 4 functions and 8 terminals. With dimensions of L3.2XB1.6XH0.8 (mm), it has a max DC resistance of 0.45 ohm and output impedance of 1000 OHM. Ideal for data line filtering applications, it operates b/w -55 to 125 °C temperatures and rated at 0.05 A current.
BLA31AG121SN4D
Murata Manufacturing's BLA31AG121SN4D is a FERRITE CHIP filter with 4 functions and 8 terminals. With dimensions of L3.2XB1.6XH0.8 (mm), it has a max DC resistance of 0.2 ohm and output impedance of 120 OHM. Ideal for data line filtering applications, it operates b/w -55 to 125 °C temperatures and has a rated current of 0.15 A.
BLA31AG221SN4D
FERRITE CHIP; Maximum DC Resistance: .25 ohm; Rated Current: .15 A; Height: .8 mm; Width (mm): 1.6; Output Impedance (ohm): 220 OHM;
BLA31AG600SN4D
Murata Manufacturing's BLA31AG600SN4D is a FERRITE CHIP filter with 4 functions and 8 terminals. With dimensions of L3.2XB1.6XH0.8 (mm), it has a max DC resistance of 0.15 ohm and rated current of 0.2 A. Ideal for data line filtering applications, this surface mount filter offers an output impedance of 60 OHM and operates b/w -55 to 125 °C temperatures.
BLA31BD221SN4D
FERRITE CHIP; Maximum DC Resistance: .35 ohm; Rated Current: .15 A; Minimum Operating Temperature: -55 Cel; Length: 3.2 mm; Width (mm): 1.6;
BLA31BD102SN4B
FERRITE CHIP; Maximum DC Resistance: .55 ohm; Rated Current: .05 A; Minimum Operating Temperature: -55 Cel; No. of Terminals: 8; Additional Features: BAG;
BLA31BD102SN4C
FERRITE CHIP; Maximum DC Resistance: .55 ohm; Rated Current: .05 A; Mounting Type: SURFACE MOUNT; Height: .8 mm; Packing Method: BULK;
BLA31BD102SN4J
FERRITE CHIP; Maximum DC Resistance: .55 ohm; Rated Current: .05 A; Minimum Operating Temperature: -55 Cel; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel;
BLA31BD102SN4K
FERRITE CHIP; Maximum DC Resistance: .55 ohm; Rated Current: .05 A; Maximum Operating Temperature: 125 Cel; Length: 3.2 mm; Output Impedance (ohm): 1000 OHM;
BLA31BD102SN4L
FERRITE CHIP; Maximum DC Resistance: .55 ohm; Rated Current: .05 A; Mounting Type: SURFACE MOUNT; Width (mm): 1.6; No. of Functions: 4;
BLA31BD121SN4B
FERRITE CHIP; Maximum DC Resistance: .3 ohm; Rated Current: .15 A; Height: .8 mm; Maximum Operating Temperature: 125 Cel; No. of Terminals: 8;
BLA31BD121SN4D
FERRITE CHIP; Maximum DC Resistance: .3 ohm; Rated Current: .15 A; Length: 3.2 mm; Output Impedance (ohm): 120 OHM; No. of Functions: 4;
BLA31BD121SN4J
FERRITE CHIP; Maximum DC Resistance: .3 ohm; Rated Current: .15 A; Additional Features: ARRAY TYPE; No. of Terminals: 8; Minimum Operating Temperature: -55 Cel;
BLA31BD221SN4B
FERRITE CHIP; Maximum DC Resistance: .35 ohm; Rated Current: .15 A; Mounting Type: SURFACE MOUNT; Width (mm): 1.6; No. of Functions: 4;
BLA31BD601SN4B
FERRITE CHIP; Maximum DC Resistance: .45 ohm; Rated Current: .1 A; Minimum Operating Temperature: -55 Cel; Height: .8 mm; Maximum Operating Temperature: 125 Cel;
BLA31BD102SN4
FERRITE CHIP; Maximum DC Resistance: .55 ohm; Rated Current: .05 A; No. of Functions: 4; Height: .8 mm; Width (mm): 1.6;
BLA31BD121SN4
FERRITE CHIP; Maximum DC Resistance: .3 ohm; Rated Current: .15 A; Mounting Type: SURFACE MOUNT; Length: 3.2 mm; Additional Features: NICKEL BARRIER TERMINATION;
BLA31BD601SN4
FERRITE CHIP; Maximum DC Resistance: .45 ohm; Rated Current: .1 A; Additional Features: NICKEL BARRIER TERMINATION; JESD-609 Code: e3; Terminal Finish: TIN;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved