Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FERRITE CHIP; Maximum DC Resistance: .6 ohm; Rated Current: .05 A; Length: 2 mm; Additional Features: ARRAY TYPE; JESD-609 Code: e3;
Median Price
$0.305
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
Element14
1+ parts
$0.630
100+ parts
$0.358
1k+ parts
$0.251
10k+ parts
$0.212
Mouser Electronics
$0.660
$0.317
$0.213
$0.183
DigiKey
$0.223
-
Future Electronics
$0.405
TTI Europe
$0.143
Farnell
$0.260
$0.189
$0.152
Newark
$0.350
$0.246
Arrow
$0.185
Verical
Chip1Stop
$0.159
$0.150
Nova Conductors
$0.162
IBS Electronics
$0.571
NAC Semi
$0.810
Vyrian
ComSIT Distribution GmbH
Global Solutions Electronics Company
VNN
Semi Source
Prism Electronics
Netroflash
$0.154
$0.151
Advanced Electronics
$0.682
$0.621
$0.559
Corohmni
$2.881
Metaverse IC Inc.
Perfect Parts
Assy Fe
Authorized Procurement Solutions
GreenTree Electronics
Argo Parts USA
Continental Prestige Electronics
iodParts Technologies Inc.
Data Line Filters BLA2ABB121SN4D attributes and parameters. Explore more Data Line Filters devices from Murata Manufacturing
Additional Features:
Maximum DC Resistance:
Filter Type:
Height:
JESD-609 Code:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Dimensions:
Rated Current:
Terminal Finish:
Width (mm):
BLA2ABB121SN4D Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
SMBJ18CA
Semtech
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-609 Code: e3; Package Shape: RECTANGULAR;
1554216004
Molex
WIRE AND CABLE;
LM317T
Fairchild Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
DS18B20Z+T&R
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Body Material: PLASTIC/EPOXY;
0460-202-16141
TE Connectivity
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
CRGCQ0805F10R
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
BAV99
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MBR1560CT
General Instrument
MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.
1N4148
Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAT54SLT1G
Onsemi
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
SMMBT3904LT1G
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
Cheng-yi Electronic
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
DLP2ADA900HL4L
Murata Manufacturing
Murata Manufacturing's DLP2ADA900HL4L is a 5V DATA LINE FILTER with 4 functions and 8 terminals. It offers a min insulation resistance of 100 Mohm, rated current of 0.12A, and max operating temperature of 85°C. Ideal for applications requiring high impedance filtering in compact spaces.
BLM18SG121TN1J
BLM18SG121TN1J by Murata Manufacturing is a chip bead data line filter with 2 terminals and a case code of 0603. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This filter is commonly used for noise suppression in electronic circuits.
BLM18KG601SH1D
Murata's BLM18KG601SH1D is a FERRITE CHIP filter with 2 terminals, rated for 1A current. With dimensions of 1.6x0.8x0.8mm, it offers an output impedance of 600Ω and operates b/w -55°C to 125°C. Ideal for data line filtering in automotive applications due to AEC-Q200 screening level compliance.
BLM31PG601SN1D
BLM31PG601SN1D by Murata is a FERRITE CHIP filter with 2 terminals, rated for 1.5A current and 600 OHM output impedance. Operating b/w -55 to 125 °C, it's ideal for data line filtering in surface mount applications due to its compact L3.2XB1.6XH1.1 (mm) dimensions and low DC resistance of 0.09 ohm.
ILBB0603ER121V
Vishay Intertechnology
Vishay Intertechnology's ILBB0603ER121V is a 2-terminal data line filter with FERRITE CHIP construction. It operates b/w -55 to 125 °C, offering a max DC resistance of 0.2 ohm and output impedance of 120 OHM at 100 MHz. Ideal for surface mount applications, it measures L1.6xB0.8xH0.8 (mm) and is approved by IEC for various electronic devices requiring noise suppression in data lines.
BLM18SG121TN1
Murata Manufacturing's BLM18SG121TN1 is a FERRITE CHIP data line filter with 120 OHM output impedance, 3A rated current, and -55 to 125 °C operating temperature range. Ideal for surface mount applications requiring effective noise suppression in electronic circuits.
BLM21PG331SN1B
Murata Manufacturing's BLM21PG331SN1B is an 0805 chip bead filter with 2 terminals, operating b/w -55 to 125 °C. It offers a DC resistance of 0.07 ohm, output impedance of 330 OHM, and rated current of 1 A. Ideal for data line filtering applications due to its ferrite construction and surface mounting type.
BNX016-01
Murata Manufacturing's BNX016-01 is a 3-function data line filter with 40 dB max insertion loss, rated for 25V and 15A. With dimensions of L12.0xB11.0xH8.0 mm, it operates b/w -40 to 125 °C and has an output impedance of 50 ohm. Ideal for applications requiring noise suppression in data lines.
BLM18AG102SN1
Murata Manufacturing's BLM18AG102SN1 is a FERRITE CHIP filter with 2 terminals, rated for 0.4A current and 1000Ω output impedance. Operating b/w -55°C to 125°C, it has dimensions of L1.6xB0.8xH0.8 (mm) and is ideal for data line filtering in surface mount applications.
BLM21PG221SN1
Murata Manufacturing's BLM21PG221SN1 is a FERRITE CHIP filter with 2 terminals, rated for 2A current. With dimensions of L2.0XB1.25XH0.85 (mm), it offers an output impedance of 220 ohm and max DC resistance of 0.05 ohm. Ideal for data line filtering applications, it operates b/w -55 to 125 °C in surface mount configurations.
HI2220R301R-10
Laird Technologies
HI2220R301R-10 by Laird Technologies is a chip bead data line filter with 2 terminals, operating b/w -40 to 125 °C. With dimensions of L5.59XB5.08XH3.45 mm, it offers a frequency range from 25 MHz to 1000 MHz and an output impedance of 300 ohm. Ideal for surface mount applications, it has a max DC resistance of 0.02 ohm and can handle up to 5 A current rating.
NFM21PC105B1A3D
Murata Manufacturing's NFM21PC105B1A3D is a data line filter with 500 Mohm insulation resistance, 10V rated voltage, and 1000000uF capacitance. Ideal for applications requiring noise suppression in electronic circuits.
MMZ2012S102AT000
TDK
MMZ2012S102AT000 by TDK is an 0805 chip bead data line filter with a max operating temperature of 125°C and min of -55°C. With dimensions of L2.0xB1.25xH0.85 (mm), it has a max DC resistance of 0.35 ohm and rated current of 0.5 A, making it suitable for surface mount applications in electronic devices requiring noise suppression.
NFE61HT332Z2A9L
Murata Manufacturing's NFE61HT332Z2A9L is a DATA LINE FILTER with 100V rated voltage, 3300uF capacitance, and 2A rated current. It is used in automotive applications due to AEC-Q200 screening level and operates b/w -55°C to 125°C temperature range.
ACM1513-551-2PL-TLHF
ACM1513-551-2PL-TLHF by TDK is a Data Line Filter with 10A rated current, 50V rated voltage, and 550 ohm output impedance. It has 2 functions and operates b/w -40°C to 85°C. Ideal for applications requiring noise filtering in data lines.
742792620
Wuerth Elektronik & Kg
Wurth Elektronik 742792620 is a FERRITE CHIP filter with 2 terminals, rated for 1.65A current. It operates b/w -55°C to 125°C, with dimensions of L1.6xB0.8xH0.8 (mm). Ideal for data line filtering in surface mount applications due to its low DC resistance of 0.15 ohm and output impedance of 100 ohm.
SBSPP1000103MXT
Knowles Precision Devices
SBSPP1000103MXT by Knowles Precision Devices is a 100 V rated data line filter with inductance of 0.25 uH, max insertion loss of 60 dB, and max DC resistance of 0.5 ohm. It is ideal for surface mount applications requiring high capacitance filtering in a compact L3.2XB1.6XH1.6 mm package.
742792121
Wurth Elektronik 742792121 is a FERRITE CHIP Data Line Filter with 1 function, multi-layer construction, and dimensions of L3.2XB1.6XH1.1 (mm). It operates b/w -55 to 125 °C and has a max frequency of 110 MHz. Ideal for surface mount applications with an output impedance of 300 OHM.
SRF0602-331Y
Bourns
Bourns SRF0602-331Y is a 2-function data line filter with inductance of 330uH and max DC resistance of 0.3 ohm. It operates b/w -40 to 105°C, rated at 50V, suitable for applications requiring output impedance of 900 ohm like data transmission systems.
MPZ1608S221ATD25
TDK's MPZ1608S221ATD25 is a FERRITE CHIP filter with 2 terminals, rated for 2.2A current and 220 ohm output impedance. Operating b/w -55°C to 125°C, it's ideal for data line filtering in surface mount applications due to its compact dimensions of L1.6xB0.8xH0.8 mm.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BLA2ABD601SN4D
FERRITE CHIP; Maximum DC Resistance: .8 ohm; Rated Current: .1 A; Packing Method: TAPE; Additional Features: ARRAY TYPE; Minimum Operating Temperature: -55 Cel;
BLA2ABD121SN4D
FERRITE CHIP; Maximum DC Resistance: .35 ohm; Rated Current: .2 A; Packing Method: TAPE; Width (mm): 1.0; Additional Features: ARRAY TYPE;
BLA2ABD102SN4D
FERRITE CHIP; Maximum DC Resistance: 1 ohm; Rated Current: .05 A; JESD-609 Code: e3; Height: .5 mm; Maximum Operating Temperature: 125 Cel;
BLA2AAG102SN4D
FERRITE CHIP; Maximum DC Resistance: 1.3 ohm; Rated Current: .05 A; Length: 2 mm; No. of Functions: 4; No. of Terminals: 8;
BLA2AAG221SN4D
FERRITE CHIP; Maximum DC Resistance: .7 ohm; Rated Current: .05 A; Terminal Finish: TIN; Maximum Operating Temperature: 125 Cel; No. of Terminals: 8;
BLA2ABD221SN4D
FERRITE CHIP; Maximum DC Resistance: .4 ohm; Rated Current: .1 A; Output Impedance (ohm): 220 OHM; Minimum Operating Temperature: -55 Cel; Width (mm): 1.0;
BLA2ABB121SN4B
FERRITE CHIP; Maximum DC Resistance: .6 ohm; Rated Current: .05 A; Height: .5 mm; Dimensions: L2.0XB1.0XH0.5 (mm)/L0.079XB0.039XH0.02 (inch); Packing Method: BULK;
BLA2ABB221SN4B
FERRITE CHIP; Maximum DC Resistance: .9 ohm; Rated Current: .05 A; No. of Terminals: 8; JESD-609 Code: e3; Packing Method: BULK;
BLA2ABB221SN4D
FERRITE CHIP; Maximum DC Resistance: .9 ohm; Rated Current: .05 A; Maximum Operating Temperature: 125 Cel; No. of Terminals: 8; Width (mm): 1.0;
BLA2ABB121SN4J
FERRITE CHIP; Maximum DC Resistance: .6 ohm; Rated Current: .05 A; JESD-609 Code: e3; Terminal Finish: TIN; Maximum Operating Temperature: 125 Cel;
BLA2ABB221SN4J
FERRITE CHIP; Maximum DC Resistance: .9 ohm; Rated Current: .05 A; Maximum Operating Temperature: 125 Cel; Dimensions: L2.0XB1.0XH0.5 (mm)/L0.079XB0.039XH0.02 (inch); Length: 2 mm;
BLA2ABB100SN4B
FERRITE CHIP; Maximum DC Resistance: .1 ohm; Rated Current: .2 A; No. of Terminals: 8; Minimum Operating Temperature: -55 Cel; Packing Method: BULK;
BLA2ABB100SN4D
FERRITE CHIP; Maximum DC Resistance: .1 ohm; Rated Current: .2 A; Packing Method: TAPE; Dimensions: L2.0XB1.0XH0.5 (mm)/L0.079XB0.039XH0.02 (inch); Mounting Type: SURFACE MOUNT;
BLA2ABB220SN4B
FERRITE CHIP; Maximum DC Resistance: .2 ohm; Rated Current: .2 A; Width (mm): 1.0; No. of Functions: 4; Dimensions: L2.0XB1.0XH0.5 (mm)/L0.079XB0.039XH0.02 (inch);
BLA2ABB220SN4D
FERRITE CHIP; Maximum DC Resistance: .2 ohm; Rated Current: .2 A; JESD-609 Code: e3; Mounting Type: SURFACE MOUNT; Length: 2 mm;
BLA2ABB121SN4
FERRITE CHIP; Maximum DC Resistance: .6 ohm; Rated Current: .05 A; Additional Features: NICKEL BARRIER TERMINATION; Minimum Operating Temperature: -55 Cel; Terminal Finish: TIN;
BLA2ABB100SN4
FERRITE CHIP; Maximum DC Resistance: .1 ohm; Rated Current: .2 A; Maximum Operating Temperature: 125 Cel; Width (mm): 1.0; Height: .5 mm;
BLA2ABB220SN4
FERRITE CHIP; Maximum DC Resistance: .2 ohm; Rated Current: .2 A; Additional Features: NICKEL BARRIER TERMINATION; Manufacturer Series: BLA; Terminal Finish: TIN;
BLA2ABB470SN4
FERRITE CHIP; Maximum DC Resistance: .35 ohm; Rated Current: .2 A; Length: 2 mm; Dimensions: L2.0XB1.0XH0.5 (mm)/L0.079XB0.039XH0.02 (inch); Minimum Operating Temperature: -55 Cel;
BLA2ABB100SN4J
FERRITE CHIP; Maximum DC Resistance: .1 ohm; Rated Current: .2 A; Height: .5 mm; Width (mm): 1.0; Length: 2 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved