Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's 56T200C is a BAR PRIMARY type current sense transformer with peak primary current of 10A. It has dimensions of 20.19mm x 8.89mm x 16.79mm and load resistance of 2.81Ω, suitable for through hole mounting applications in various electronic devices.
Median Price
$1.484
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
RS (Exports)
1+ parts
-
100+ parts
$1.549
1k+ parts
$1.383
10k+ parts
Arrow
$1.144
Verical
$1.457
$1.377
Chip1Stop
$1.510
Nova Conductors
$1.470
VNN
Bristol Electronics
Vyrian
Continental Prestige Electronics
$1.441
Argo Parts USA
Netroflash
AZTECH Wire
$19.127
Perfect Parts
Bar primary type ensures efficient current sensing and accurate measurement of current flow.
High peak current rating allows the transformer to handle high current applications without any risk of damage.
Compact height makes it suitable for applications where space is limited.
Narrow width enables easy integration into different electronic circuits and devices.
Optimal load resistance ensures accurate current sensing and measurement results.
Designed specifically for current sensing applications, ensuring high accuracy and reliability.
Through-hole mounting feature makes installation quick and easy, suitable for automated manufacturing processes.
Moderate length allows for versatility in placement within electronic circuits.
Current Sense Transformers 56T200C attributes and parameters. Explore more Current Sense Transformers devices from Murata Manufacturing
Height:
Length:
Load Resistance:
Mounting Feature:
Primary Current (Peak):
Type (Primary):
Transformer Type:
Width:
56T200C Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
SMBJ18CA
Micro Commercial Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BSS138
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
1N4148WS
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
BSS123LT1G
Onsemi
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
MMBT3904-7-F
Diodes Incorporated
Diodes Inc. MMBT3904-7-F is a NPN BJT transistor for switching applications. Features include VCEsat of 0.3V, hFE of 30, and IC of 0.2A. With a max operating temp of 150°C, it's ideal for small outline SMT designs in automotive electronics.
2N2222A
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
LD1117S33TR
STMicroelectronics
LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.
Transys Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
CL10B104KB8NNNC
Samsung Electro-mechanics
CL10B104KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in various electronic devices. With dimensions of 1.6mm x 0.8mm x 0.9mm, it operates b/w -55 to 125 °C providing stable performance in compact designs.
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
LM555CM
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM2931Z-5.0G
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
LAN8720A-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
SS14
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
B82801B0205A100
The TDK B82801B0205A100 is a WOUND PRIMARY current sense transformer with 20A peak primary current and 2000uH secondary inductance. Ideal for applications requiring precise current sensing at frequencies up to 1MHz, operating b/w -40°C to 125°C. Dimensions: L8.38xB7.11xH5.08mm, TR, BLISTER packing method.
PA0368.050NLT
Pulse Electronics
PA0368.050NLT by Pulse Electronics is a WOUND PRIMARY current sense transformer with 4A peak primary current and 1700uH secondary inductance. It operates b/w -40 to 130°C, suitable for surface mount applications at frequencies ranging from 50kHz to 1MHz.
PB0026NL
PB0026NL by Pulse Electronics is a WOUND PRIMARY current sense transformer with 35A peak primary current. It has inductance of 5600uH, operates b/w -40 to 130°C, and supports frequencies from 50KHz to 500KHz. Ideal for surface mount applications requiring precise current sensing in compact spaces.
CSE187L-P
Triad Magnetics
CSE187L-P by Triad Magnetics is a WOUND PRIMARY current sense transformer with 4000V isolation voltage. It has an output current of 30A and dimensions of L22.22xB22.22xH18.29 (mm). Ideal for SIGNAL applications, it operates b/w -40 to 105 °C with a turns ratio of 1:500 at a max frequency of 0.4 KHz.
5313
Api Technologies
CURRENT SENSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Length: 55.58 mm; Load Resistance: 100 ohm; Maximum Operating Frequency: 100 KHz; Height: 55.58 mm;
5382
5382 by Api Technologies is a BAR PRIMARY current sense transformer with peak primary current of 120A. It features dimensions of L38.1xB14.22xH38.1mm and load resistance of 1Ω, suitable for through hole mounting applications in various electronic devices.
FIS115NL
FIS115NL by Pulse Electronics is a WOUND PRIMARY current sense transformer with 25A peak primary current, 18000uH secondary inductance, and 1:100 turns ratio. Ideal for applications requiring precise current sensing in circuits operating up to 500KHz frequency.
P8208NL
Pulse Electronics P8208NL is a WOUND PRIMARY current sense transformer with 10A peak primary current. It has dimensions of L8.38XB7.21XH5.5 (mm) and inductance of 2000uH, suitable for surface mount applications measuring load resistance up to 5.5 ohm at frequencies ranging from 20KHz to 1000KHz.
CST2010-100LD
Coilcraft
CST2010-100LD by Coilcraft is a WOUND PRIMARY current sense transformer with 254 V-us ET product, 47 A primary current peak, and -40 to 125 °C operating temperature range. Ideal for surface mount applications in automotive electronics, offering high inductance of 8500 uH and turns ratio of 1:100 for precise current sensing at frequencies up to 1 MHz.
53070C
C&d Technologies
CURRENT SENSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 5300; Terminal Finish: Tin (Sn); Turns Ratio (Np:Ns): 1:70; Additional Features: LENGTH & HEIGHT DIM INCLUDE TERMINAL ALSO;
53040C
Murata Manufacturing
Murata Manufacturing's 53040C is a WOUND PRIMARY current sense transformer with 10A peak primary current. Measuring 5.4mm in height, 7.2mm in width, and 8.3mm in length, it has a turns ratio of 1:40 and load resistance of 1.1Ω. Ideal for surface mount applications requiring precise current sensing capabilities.
PE-68280NLT
PE-68280NLT by Pulse Electronics is a WOUND PRIMARY current sense transformer with 15A peak primary current. It has dimensions of L12.57xB12.45xH7.11 (mm) and inductance of 14800uH, suitable for surface mount applications at temperatures ranging from -40 to 130 °C.
CST-1005
CST-1005 by Triad Magnetics is a BAR PRIMARY current sense transformer with 5A output current and 5000mA DC unbalance. It has dimensions of L23.5xB12.0xH24.8 (mm) and is ideal for POWER applications at 50/60Hz frequency, with a load resistance of 100 ohm and turns ratio of 1000:1.
5311
CURRENT SENSE TRANSFORMER;
B82801B0984A070
The TDK B82801B0984A070 is a WOUND PRIMARY current sense transformer with 20A peak primary current and 980uH secondary inductance. Ideal for applications requiring precise current sensing at frequencies ranging from 50kHz to 1MHz, it features a compact size of L8.38xB7.11xH5.08mm and can operate b/w -40°C to 125°C temperatures.
AS-101
Nuvotem Talema
AS-101 by Nuvotem Talema is a BAR PRIMARY current sense transformer with inductance of 25000 uH. It operates b/w -40 to 120 °C and has a turns ratio of 1:100. Ideal for applications requiring precise current sensing at frequencies ranging from 20 KHz to 200 KHz.
PA0368.125NLT
PA0368.125NLT by Pulse Electronics is a WOUND PRIMARY current sense transformer with 1:125 turns ratio. It operates b/w -40 to 130 °C at frequencies up to 1 MHz, ideal for surface mount applications in measuring currents up to 4A accurately.
54200C
Murata Manufacturing's 54200C is a WOUND PRIMARY current sense transformer with peak primary current of 15A. It has dimensions of L10.8xB9.0xH8.2 (mm) and load resistance of 6.6 ohm, suitable for surface mount applications in various electronic devices requiring precise current sensing capabilities.
CST206-2A
Triad Magnetics CST206-2A is a BAR PRIMARY current sense transformer with 56000 uH inductance. It has a peak primary current of 80 A and max DC unbalance current of 80000 mA. Ideal for POWER applications, it operates at frequencies ranging from 20 KHz to 200 KHz and features a turns ratio of 1:200.
CST7030-050LC
CST7030-050LC by Coilcraft is a WOUND PRIMARY current sense transformer with 20A peak primary current and 333uH secondary inductance. It operates b/w -40 to 125°C, suitable for applications requiring precise current sensing at frequencies up to 1MHz, such as power supplies and motor control systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
56T200
CURRENT SENSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 5600; Load Resistance: 200 ohm; Dimensions: L16.79XB8.89XH20.19 (mm); Height: 20.19 mm;
CURRENT SENSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 5600; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); JESD-609 Code: e1; Width: 8.89 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved