Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
22R156C by Murata Manufacturing is a fixed inductor with nominal inductance of 15000 uH, DC resistance of 51.7 ohm, and max rated current of 0.054 A. It is a general purpose inductor suitable for power applications due to its cylindrical shape and radial terminal placement. Operating temperature ranges from -25 to 70 °C.
Median Price
$0.824
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Arrow
1+ parts
$0.208
100+ parts
-
1k+ parts
10k+ parts
Newark
$1.040
$0.961
$0.839
Mouser Electronics
$1.520
$0.837
$0.717
$0.691
RS (Exports)
$0.722
$0.703
Verical
$0.574
$0.518
Chip1Stop
Nova Conductors
$0.714
Bristol Electronics
$0.633
Vyrian
Semicontronic
$0.177
$0.173
$0.172
Continental Prestige Electronics
$0.607
$0.548
$0.526
Argo Parts USA
$0.693
Netroflash
AZTECH Wire
$14.406
Perfect Parts
Smaller lead diameter provides better conductivity and stability, making the product a reliable choice for power applications.
High nominal inductance ensures efficient power handling and smooth operation in power inductor applications.
With a relatively high maximum rated current, this inductor can handle heavy loads effectively, increasing its versatility in various applications.
Wide operating temperature range allows for use in different environments, making this product suitable for diverse applications.
High self-resonance frequency ensures minimal interference and optimal performance in high-frequency applications.
Low DC resistance minimizes power loss and ensures efficient energy transfer, enhancing the overall performance of the inductor.
Fixed Inductors 22R156C attributes and parameters. Explore more Fixed Inductors devices from Murata Manufacturing
Inductor Type:
Inductor Application:
Nominal Inductance:
Maximum Rated Current:
DC Resistance:
Tolerance:
No. of Functions:
Self Resonance Frequency:
Test Frequency:
Package Shape:
Lead Diameter:
Lead Spacing:
Shielded:
Construction:
Surface Mounted:
Minimum Operating Temperature:
Maximum Operating Temperature:
Terminal Position:
Terminal Shape:
No. of Terminals:
Package Style:
Package Length:
Package Height:
Package Width:
Packing Method:
22R156C Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
PCN Design/Specification - 2200R Series Product Core Jul/2010
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
MBRS360T3G
Onsemi
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
FDN306P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
1N4148WT
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
2N7002
Diotec Semiconductor Ag
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 10; Terminal Finish: MATTE TIN;
Shandong Yiguang Electronic Joint Stock
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T/NOPB
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
BSS138
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
Sangdest Microelectronics (Nanjing)
SMBJ18CA
Thinking Electronic Industrial
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Space Power Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Electronic Devices
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT3904LT1G
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
LM555CN
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
M24308/2-1F
Souriau
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Body or Shell Style: RECEPTACLE; MIL Conformity: YES;
MLZ2012N6R8LTD25
TDK
MLZ2012N6R8LTD25 by TDK is an 0805 SMT fixed inductor with 6.8uH nominal inductance, 0.55A max current, and -55 to 125°C operating temp range. Ideal for general purpose applications requiring compact size and high performance.
B82477R4474M100
B82477R4474M100 by TDK is a shielded, surface mount fixed inductor with 470uH nominal inductance. It has a max rated current of 1.07A and operates b/w -55°C to 150°C. Ideal for power applications, this general purpose inductor features a ferrite core and dual-ended terminals.
PE-0402CD400JTG
Pulse Electronics
PE-0402CD400JTG by Pulse Electronics is a fixed inductor with 0.04uH nominal inductance, 2240MHz self-resonance frequency, and 26 min quality factor. Ideal for RF applications due to its dual-ended terminal placement and rectangular package shape.
DR74-4R7-R
Cooper Industries
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
LQW18AN18NG00D
Murata Manufacturing
LQW18AN18NG00D by Murata is a wirewound chip inductor with 0.018 uH nominal inductance, suitable for RF applications. Featuring dual-ended terminals and SMT packaging, it operates b/w -55 to 125 °C with a max rated current of 0.55 A. With a min quality factor of 40 at L-nom, this general-purpose inductor has a self-resonance frequency of 5500 MHz.
CIGT201608EHR47MNE
Samsung Electro-mechanics
CIGT201608EHR47MNE by Samsung Electro-mechanics is a surface mount fixed inductor with dual-ended terminals. It has a nominal inductance of 0.47uH, max rated current of 4.3A, and operates b/w -40 to 125°C. Ideal for power applications, this general purpose inductor features a metal composite core and wraparound terminals.
SRP1265A-4R7M
Bourns
Bourns SRP1265A-4R7M is a shielded SMT power inductor with 4.7uH nominal inductance, 13.5A max current, and 150°C max operating temp. Ideal for general purpose applications requiring high quality factor and self-resonance frequency of 17MHz.
32860
Vishay Intertechnology
GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Terminal Placement: RADIAL; Maximum Rated Current: 56.3 A;
B82732F2451B001
The TDK B82732F2451B001 is a general purpose inductor with 100000 uH nominal inductance, 2.93 ohm DC resistance, and 0.45 A max rated current. It is used as a power inductor for various applications due to its ferrite core material and dual in-line terminal placement.
IHLP2525CZER4R7M01
Vishay Intertechnology's IHLP2525CZER4R7M01 is a shielded, surface mount inductor with 4.7uH nominal inductance and 5.5A max rated current. Ideal for high current applications, this general purpose inductor has a DC resistance of 0.04 ohm and operates b/w -55°C to 125°C temperature range.
DFE252012F-1R0M=P2
Toko
IDCP2218ER101M
Vishay Intertechnology's IDCP2218ER101M is a surface mount fixed inductor with 100uH nominal inductance, 0.7 ohm DC resistance, and 0.52A max rated current. Ideal for high current applications, this general purpose inductor features a ferrite core and operates b/w -40°C to 125°C.
768772152
Wuerth Elektronik & Kg
768772152 by Wuerth Elektronik & Kg is a fixed inductor with 0.7mm lead diameter and 5mm lead spacing, suitable for RF applications. It has a nominal inductance of 1500uH, max operating temperature of 125°C, and self-resonance frequency of 1.5MHz. Ideal for general purpose inductor needs due to its cylindrical package design and radial terminal placement.
MLZ1608M100WT
The TDK MLZ1608M100WT is a 10uH fixed inductor with 2 terminals, suitable for RF applications. It features a max operating temperature of 125°C and a self-resonance frequency of 50MHz. With a compact size of 1.6mm x 0.8mm x 0.8mm, it is ideal for surface mount designs requiring high-frequency performance.
LQW15AN5N6C10D
LQW15AN5N6C10D by Murata is a 0402 wirewound chip inductor with 0.0056 uH nominal inductance, suitable for RF applications. It has a max rated current of 0.8 A and operates b/w -55 to 125 °C, featuring a Q measured at 250 MHz. Ideal for general purpose use due to its high self-resonance frequency of 8000 MHz and low DC resistance of 0.051 ohm.
50034
Vanguard Electronics
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: NO; Surface Mount: YES;
DRA124-681-R
Cooper Electronic Technologies
GENERAL PURPOSE INDUCTOR; Inductor Application: DC-DC CONVERTER; No. of Terminals: 2; Shielded: YES; Surface Mount: YES; DC Resistance: 1.96 ohm;
2324-V-RC
2324-V-RC by Bourns is a shielded fixed inductor with radial terminal placement. It has a nominal inductance of 1000 uH and can handle a max rated current of 2.4 A. This high current inductor is ideal for general purpose applications requiring a cylindrical package design.
IHLP5050EZER1R0M01
Vishay Intertechnology's IHLP5050EZER1R0M01 is a shielded, surface mount fixed inductor with 1uH nominal inductance and 29A max rated current. Ideal for high current applications, this rectangular package inductor operates b/w -55°C to 125°C, featuring a DC resistance of 0.0025 ohm and a compact size of 13.2mm x 12.9mm x 5mm.
Z-7E
Ohmite Manufacturing
Z-7E by Ohmite Manufacturing is a radial fixed inductor with 84uH nominal inductance, 1A max current, and 13MHz self-resonance freq. Ideal for RF applications due to its single-layer construction and flat terminal shape in a tubular package.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
22R155MC
GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: NO; Surface Mount: YES; Package Width: 7.8 mm;
22R103C
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Package Style (Meter): Radial; Shielded: NO; Surface Mount: NO;
C&d Technologies
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Tolerance: 10 %;
22R105C
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Test Frequency: .001 MHz;
22R106MC
22R106MC by Murata Manufacturing is a surface mount fixed inductor with a nominal inductance of 10000 uH. It has a max rated current of 0.068 A and can operate b/w -40 to 85 °C. This general purpose inductor is commonly used for various applications requiring high inductance and compact size.
22R153C
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Maximum Rated Current: 1.35 A;
GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Package Style (Meter): Radial; Shielded: NO; Surface Mount: NO; Shape or Size Description: CYLINDRICAL PACKAGE;
22R156C
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; JESD-609 Code: e3;
22R106C
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Nominal Inductance (L): 10000 uH;
GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Package Style (Meter): Radial; Shielded: NO; Surface Mount: NO; Maximum Operating Temperature: 70 Cel;
22R104C
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Terminal Finish: Tin (Sn);
GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Package Style (Meter): Radial; Shielded: NO; Surface Mount: NO; Package Width: 6.5 mm;
22R156MC
GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: NO; Surface Mount: YES; DC Resistance: 49.5 ohm;
22R154C
22R155C
22R156
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Shape or Size Description: CYLINDRICAL PACKAGE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved