Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MP3412EJ-LF-Z by Monolithic Power Systems is a small outline switching regulator with boost configuration. It operates at -20 to 85°C, has a max switching frequency of 1200 kHz, and supports input voltages from 0.8V to 4.4V. Ideal for applications requiring efficient power conversion in compact spaces.
Median Price
$2.090
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Monolithic Power Systems
1+ parts
100+ parts
$1.490
1k+ parts
-
10k+ parts
Nova Conductors
$1.080
IBS Electronics
$2.553
$2.202
$1.227
Vyrian
Corohmni
Semicontronic
$3.870
$3.773
$3.754
Ampacity Inc.
Aztec Data Supply Inc.
$17.730
Speed Components Ltd (Excess)
Kepictronics
Perfect Parts
Continental Prestige Electronics
Argo Parts USA
Aranea Global
Plastic/epoxy material offers good durability and heat resistance, making the product suitable for various environmental conditions.
Surface mount design enables easy and efficient integration onto circuit boards, saving space and simplifying assembly processes.
Having 6 terminals provides flexibility in connecting the regulator to other components, ensuring proper functionality and compatibility.
Current-mode control offers better stability and responsiveness in regulating output voltages, enhancing the overall performance of the product.
High maximum operating temperature allows the regulator to function efficiently even in elevated temperature environments, ensuring reliability and longevity.
High switching frequency enables fast and precise voltage regulation, reducing ripple and improving efficiency in power conversion.
Switching Regulators & Controllers MP3412EJ-LF-Z attributes and parameters. Explore more Switching Regulators & Controllers devices from Monolithic Power Systems
Additional Features:
Other IC type:
Control Mode:
Control Technique:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Nominal Output Voltage:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
MP3412EJ-LF-Z Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
It started with a vision. Michael Hsing, pioneering engineer and CEO, founded Monolithic Power Systems, Inc. in 1997 with the belief that an entire power system could be integrated onto a single chip. Under his leadership, MPS has succeeded not only in developing a monolithic power module that truly integrates an entire power system in a single package, but also it continues to defy industry expectations with its patented groundbreaking technologies. We make power design fun! With our innovative proprietary technology processes, we thrive on re-imagining and re-defining the possibilities of high-performance power solutions in industrial applications, telecom infrastructures, cloud computing, automotive, and consumer applications. We are creative thinkers. We break boundaries. We take technology to new levels. As a leading international semiconductor company, Monolithic Power Systems (MPS) creates cutting-edge solutions to improve the quality of life with green, easy-to-use products.
2N2222A
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
LL4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
Asi Semiconductor
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
Freescale Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148W-T
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SN6505BDBVR
Texas Instruments
SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
MMBT2907ALT1G
Onsemi
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
NE555DR
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
CRCW080510R0FKEA
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
LTC1983ES6-5#TRMPBF
Linear Technology
SWITCHED CAPACITOR REGULATOR; Temperature Grade: COMMERCIAL; No. of Terminals: 6; Package Code: VSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TPS54335ADDAR
TPS54335ADDAR by Texas Instruments is a switching regulator with a max output current of 3A and a max switching frequency of 1500kHz. It is commonly used in industrial applications for voltage regulation with an input voltage range of 4.5V to 28V.
LM2664M6/NOPB
SWITCHED CAPACITOR CONVERTER; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
EN5322QI
Intel
EN5322QI by Intel is a voltage-mode switching regulator with 24 terminals, operating b/w -40 to 85°C. It offers a max output current of 2A at a frequency of 4000 kHz, suitable for industrial applications requiring efficient power management in compact spaces.
TPS62175DQCR
TPS62175DQCR by Texas Instruments is a switching regulator with a max output current of 0.5A and a max input voltage of 28V. It is commonly used in industrial applications due to its temperature grade and small package size.
LM2674M-12/NOPB
LM2674M-12/NOPB by Texas Instruments is a voltage-mode switching regulator with a max output current of 0.5A and a nominal output voltage of 12V. It operates in a temperature range from -40°C to 125°C, making it suitable for automotive applications. This small outline package has dual terminals and uses DMOS technology for efficient performance.
LM2675MX-5.0
LM2675MX-5.0 by Texas Instruments is a switching regulator with 2.2A output current, 275kHz max switching frequency, and 5V nominal output voltage. Ideal for automotive applications due to its DMOS technology, it operates b/w -40°C to 125°C temperature range and supports input voltages from 6.5V to 40V.
LM5085MYX/NOPB
Switching Regulator or Controllers; No. of Terminals: 8; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Qualification: Not Qualified;
LMZ14203HTZE/NOPB
LMZ14203HTZE/NOPB by Texas Instruments is a switching regulator with 3A output current, 5-24V output voltage range, and 6-42V input voltage range. It operates in voltage-mode control with a max switching frequency of 1MHz. Ideal for automotive applications due to its -40 to 125°C temperature grade and small outline package style.
LT8640SIV#PBF
Analog Devices
LT8640SIV#PBF by Analog Devices is a switching regulator with a max output current of 12.5A and a max input voltage of 42V. It is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.
LM2576HVT-ADJ
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: TO-220; Package Shape: RECTANGULAR; Surface Mount: NO;
LM2596SX-3.3/NOPB
LM2596SX-3.3/NOPB by Texas Instruments is a switching regulator with a max output current of 3A, ideal for automotive applications. It operates b/w -40 to 125°C, with a voltage-mode control mode and buck switcher config. With a small outline package style and surface mount capability, it's versatile for various electronic designs.
TPS552882QWRPMRQ1
TPS552882QWRPMRQ1 by Texas Instruments is a 26-terminal switching regulator with a 12V nominal input/output voltage, operating b/w -40 to 150°C. It utilizes current-mode control and pulse width modulation technique for buck-boost configuration, supporting up to 6.35A output current at a max frequency of 2200 kHz. Ideal for automotive applications due to AEC-Q100 screening level and compact chip carrier package style.
LM5164DDAR
LM5164DDAR by Texas Instruments is a switching regulator with 1A output current, 90V max output voltage, and 1000kHz max switching frequency. Ideal for automotive applications due to its -40 to 150°C operating temperature range and compact design. Suitable for various power management tasks in automotive electronics systems.
LM27762DSSR
LM27762DSSR by Texas Instruments is a switching regulator with 2 outputs, max output current of 0.25A, and max switching frequency of 2200kHz. It operates in industrial temperature range and uses pulse frequency modulation for control. Ideal for applications requiring efficient power conversion in compact spaces.
TPS62903RPJR
TPS62903RPJR by Texas Instruments is a switching regulator with 3A output current, 1.2V nominal output voltage, and 2500kHz max switching frequency. Ideal for automotive applications due to its -40 to 150°C operating temperature range and compact chip carrier package style. Suitable for various power management needs in automotive electronics systems.
LMZ23603TZ/NOPB
Switching Regulator or Controllers; No. of Terminals: 7; Surface Mount: YES; Peak Reflow Temperature (C): 245; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Position: SINGLE;
LM2675MX-ADJ/NOPB
LM2675MX-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with a max output current of 1A and a max output voltage of 37V. It operates in an automotive temperature grade range from -40°C to 125°C, making it suitable for various automotive applications requiring efficient power management. With a compact small outline package style and pulse width modulation control technique, this DMOS technology-based regulator offers reliable performance in space-constrained environments.
TPS54040ADGQR
TPS54040ADGQR by Texas Instruments is a switching regulator with a max output current of 0.5A and a max input voltage of 42V, suitable for automotive applications. It operates in current-mode control with a min output voltage of 0.8V and supports pulse width modulation as the control technique, making it ideal for compact designs requiring efficient power management at temperatures ranging from -40 to 125°C.
LM25011MY/NOPB
LM25011MY/NOPB by Texas Instruments is a switching regulator with a 12V nominal input voltage, 2A max output current, and 2000 kHz max switching frequency. It is ideal for automotive applications due to its -40 to 125 °C operating temperature range and compact square package design.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MP3414AGJ-Z
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: VSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MP3418GJ-Z
MP3418GJ-Z by Monolithic Power Systems is a small outline switching regulator with a max operating temperature of 125°C. It operates in boost configuration, with a control mode of current-mode and pulse width modulation technique. Ideal for automotive applications due to its high switching frequency of 1200 kHz and wide input voltage range from 0.6V to 4V.
MP3414DJ-LF-Z
MP3418GJ
MP3418GJ by Monolithic Power Systems is a small outline switching regulator with current-mode control, operating b/w -40 to 125°C. It features boost configuration, 1.8V nominal input voltage, and 3.3V output voltage suitable for automotive applications at a max frequency of 1200 kHz.
MP3429GL-Z
MP3429GL-Z by Monolithic Power Systems is a boost switching regulator with a max output current of 23.5A and a max switching frequency of 700kHz. Ideal for automotive applications, it operates in temperatures ranging from -40 to 125°C, making it suitable for various power management needs.
MP3429GL
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 13; Package Code: VQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
MP3414EGJ-Z
SWITCHING REGULATOR; No. of Terminals: 8; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE, THIN PROFILE, SHRINK PITCH;
MP3435GL-Z
SWITCHING REGULATOR; No. of Terminals: 20; Package Code: VQCCN; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Seated Height: 1 mm;
MP3437GJ-Z
SWITCHING REGULATOR; No. of Terminals: 8; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Switcher Config: BOOST;
MP3414AGJ
MP3416GQH-Z
SWITCHING REGULATOR; No. of Terminals: 8; Package Code: VSON; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Output Current: 1.41 A;
MP3435GL
SWITCHING REGULATOR; No. of Terminals: 20; Package Code: VQCCN; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Output Voltage: 22 V;
MP3414DJ-LF
MP3428AGL-Z
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 22; Package Code: VQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
MP3426DL-LF
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 14; Package Code: HVSON; Package Shape: RECTANGULAR; Surface Mount: YES;
MP3426DL-LF-Z
MP3438GTL
SWITCHING REGULATOR;
MP3438GTL-Z
MP3412EJ-Z
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 6; Package Code: VSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MP3412EJ
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved