Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
Median Price
$2.176
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Rochester
1+ parts
$1.440
100+ parts
$1.350
1k+ parts
$1.220
10k+ parts
-
Arrow
$2.138
$1.295
Texas Instruments
$2.213
$1.828
$0.988
Mouser Electronics
$3.310
$2.050
$1.790
$1.760
DigiKey
$2.046
Adafruit Industries
$7.175
$6.816
RS (Exports)
$2.067
$1.768
Verical
Digiode
$1.368
Nova Conductors
$2.090
Chip Stock
Vyrian
Anansix
ComSIT Distribution GmbH
ComSIT USA
Ampacity Inc.
$1.100
Semicontronic
$1.072
$1.067
Corphita
$1.296
Component Stockers USA
$1.410
$1.570
$1.430
Argo Parts USA
$2.009
Continental Prestige Electronics
$1.969
Modulus Dynamics
$2.320
$2.297
$2.227
Allen Electronics Distributors
$2.460
$1.894
Advanced Electronics
Parana Technologies
$20.912
$21.104
Corohmni
$21.098
DigiPath Technology Company
$23.027
$21.185
ChromeModa Solutions
$23.497
$19.268
IDEA Electronic Components Group
$22.322
$21.147
QUARKTWIN TECHNOLOGY LTD
Perfect Parts
A-Z Elektronik GmbH
Lixinc
Futuretech Components
Alle Elektronik GmbH
Authorized Procurement Solutions
Robosynatics
$8.313
Lucentia Tech
Kepictronics
Netroflash
$2.048
$1.985
$1.944
Switching Regulators & Controllers LM5085MME/NOPB attributes and parameters. Explore more Switching Regulators & Controllers devices from National Semiconductor
Additional Features:
Other IC type:
Control Mode:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Nominal Output Voltage:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
LM5085MME/NOPB Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - Copper Wire Revision A 19/Jan/2015 Copper Wire Base Metal 29/Sep/2014
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
1N4148WS
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Onsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
STM32F405RGT6TR
STMicroelectronics
STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.
BSS138LT3G
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
LM555CMX
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
Meritek Electronics
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
OPA2277UA
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
LM358DR2G
LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.
1N4148
American Power Devices
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
Vishay Intertechnology
Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.
M39029/58-360
Itt Cannon
CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDV303N
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
RC0402JR-070RL
Yageo
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
BAV99WT1G
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
LMZ14202TZ-ADJ/NOPB
Switching Regulator or Controllers; No. of Terminals: 7; Surface Mount: YES; Peak Reflow Temperature (C): 245; Moisture Sensitivity Level (MSL): 3; Terminal Position: SINGLE;
TPS63000DRCR
TPS63000DRCR by Texas Instruments is a switching regulator with max output voltage of 5.5V, max output current of 2A, and max operating temp of 85°C. Ideal for industrial applications requiring efficient power conversion in a compact form factor.
TPS54040DGQR
TPS54040DGQR by Texas Instruments is a switching regulator with a max output current of 0.5A and a max operating temperature of 150°C. It operates in buck configuration, suitable for automotive applications due to its control mode being current-mode and wide input voltage range from 3.5V to 42V.
LM60430AQRPKRQ1
Texas Instruments' LM60430AQRPKRQ1 is a switching regulator with 3A output current, 460kHz max switching frequency, and -40 to 150°C operating temp. Ideal for automotive applications due to AEC-Q100 screening level, it offers a compact chip carrier package style with 13 terminals for efficient power management in tight spaces.
SG3525AN
Linear Technology
SWITCHING CONTROLLER; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
TPS60403DBVR
TPS60403DBVR by Texas Instruments is a small outline, low profile switching regulator with 5 terminals. It operates at -40 to 85°C and has a max output current of 0.06A. Ideal for industrial applications requiring a switched capacitor converter with input voltage range of 1.8-5.25V.
SG3525AP013TR
SG3525AP013TR by STMicroelectronics is a 16-terminal switching controller with PWM control mode, operating b/w 0-70°C. It has a max output current of 0.5A and supports a max switching frequency of 500kHz. Ideal for applications requiring voltage-mode control in small outline packages.
TPS560430XFDBVR
TPS560430XFDBVR by Texas Instruments is a switching regulator with 6 terminals, operating b/w -40 to 125°C. It offers a max output voltage of 24V, current-mode control, and pulse width modulation technique. Ideal for automotive applications due to its compact size (2.9mm x 1.6mm) and high switching frequency of 2100 kHz.
TPS5430DDAR
TPS5430DDAR by Texas Instruments is a switching regulator with 3A output current, 1.23V min output voltage, and 500kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and pulse width modulation control technique.
LTC3779EFE#PBF
SWITCHING CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 38; Package Code: HTSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TPS62130RGTT
TPS62130RGTT by Texas Instruments is a switching regulator with a 12V nominal input voltage and 3A max output current. It operates in voltage-mode control with a max switching frequency of 2500 kHz, making it suitable for industrial applications requiring efficient power conversion. The chip carrier package style with very thin profile and no-lead terminal form enhances space-saving design possibilities.
TPS57160QDGQRQ1
TPS57160QDGQRQ1 by Texas Instruments is a switching regulator with 1.5A output current, 2500kHz max switching frequency, and -40 to 125°C operating temp. Ideal for automotive applications due to its compact size, PWM control mode, and wide input voltage range of 3.5V to 60V.
TPS560430XDBVT
TPS560430XDBVT by Texas Instruments is a switching regulator with a max output current of 0.6A and a max operating temperature of 125°C, suitable for automotive applications. It operates in buck configuration with pulse frequency modulation control technique, offering a wide input voltage range from 4V to 36V and an output voltage as low as 1V.
TPS5410D
TPS5410D by Texas Instruments is a switching regulator with a max output current of 1A and a max input voltage of 36V. It is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.
LMZ14201TZ-ADJ/NOPB
Switching Regulator or Controllers; No. of Terminals: 7; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Position: SINGLE; Control Mode: VOLTAGE-MODE;
Analog Devices
LM2596DSADJR4G
LM2596DSADJR4G by Onsemi is a switching regulator with 5 terminals, operating b/w -40 to 125°C. It has a max output current of 7.5A and supports input voltages from 4.5V to 40V, making it ideal for automotive applications requiring voltage-mode control up to 180kHz frequency.
MC34063ACN
MC34063ACN by STMicroelectronics is a voltage-mode switching regulator with 8 terminals. It operates b/w 0-70°C, supporting boost configuration with max output current of 1.5A at 100kHz frequency. Ideal for applications requiring efficient power conversion in commercial-grade electronics.
AP63200WU-7
Diodes Incorporated
SWITCHING REGULATOR; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 30;
CHL8328-00CRT
International Rectifier
Switching Regulator or Controllers;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LM5017MRX/NOPB
LM5017MRX/NOPB by Texas Instruments is a switching regulator with 8 terminals, operating temperature range of -40 to 125°C, and output voltage up to 90V. It is ideal for automotive applications due to its small size, high efficiency (up to 0.6A output current), and wide input voltage range from 7.5V to 100V.
LM5085MYX/NOPB
Switching Regulator or Controllers; No. of Terminals: 8; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Qualification: Not Qualified;
LM5085MYX/NOPB by Texas Instruments is a voltage-mode switching controller with a max output current of 10A and a max output voltage of 75V. It operates in an automotive temperature grade range from -40°C to 125°C, making it suitable for various automotive applications requiring efficient power management. The small outline package with dual terminals and gull wing form factor ensures easy surface-mount installation in space-constrained environments.
LM5002MAX/NOPB
LM5002MAX/NOPB by Texas Instruments is a current-mode switching regulator with a max output voltage of 75V and max output current of 0.6A. It operates in pulse width modulation control mode, suitable for automotive applications due to its wide temperature range (-40 to 125°C) and small outline package style.
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM5017MRE/NOPB
LM5017MRE/NOPB by Texas Instruments is a switching regulator with a max output current of 0.6A and a max output voltage of 90V. It operates in temperatures ranging from -40 to 125°C, making it suitable for automotive applications. This small outline package with dual terminals is ideal for space-constrained designs requiring efficient power management.
LM5007MMX/NOPB
LM5007MMX/NOPB by Texas Instruments is a switching regulator with a max output voltage of 73V and max output current of 0.5A. It operates in automotive-grade temperatures, making it suitable for various applications requiring efficient power management in tight spaces. With a compact square package style and surface-mount capability, it is ideal for space-constrained designs in automotive electronics and industrial automation systems.
LM5017MR/NOPB
LM5017MR/NOPB by Texas Instruments is a switching regulator with a max output current of 0.6A and a max output voltage of 90V. It operates in temperatures ranging from -40 to 125°C, making it suitable for automotive applications. With a compact package style and surface-mount design, it is ideal for space-constrained electronic devices.
LM5017SDX/NOPB
LM5017SDX/NOPB by Texas Instruments is a switching regulator with max output voltage of 90V, max output current of 0.6A, and max switching frequency of 1MHz. Ideal for automotive applications due to its temp grade and small outline package style.
LM5007MM/NOPB
LM5007MM/NOPB by Texas Instruments is a switching regulator with a max output voltage of 73V and max output current of 0.5A. It operates in automotive-grade temperatures (-40 to 125°C) making it suitable for automotive applications. With a compact package style, small outline, and thin profile, it is ideal for space-constrained designs.
LM5008MMX/NOPB
LM5008MMX/NOPB by Texas Instruments is a switching regulator with a max output voltage of 75V and max output current of 0.61A. Ideal for automotive applications, it operates b/w -40 to 125°C, featuring hysteric current mode control technique and buck switcher configuration.
LM5085MYE/NOPB
LM5085MYE/NOPB by Texas Instruments is a voltage-mode switching regulator with a max output current of 10A and a wide input voltage range from 4.5V to 75V. It operates in automotive-grade temperatures (-40°C to 125°C) and has a compact package style suitable for space-constrained applications. Ideal for buck converter configurations, this IC offers high efficiency with a max switching frequency of 1000kHz.
LM5085MY/NOPB
LM5085MY/NOPB by Texas Instruments is a switching regulator with 8 terminals, operating temperature range of -40 to 125°C, and output voltage up to 75V. It is ideal for automotive applications due to its compact size, high efficiency (up to 10A output current), and wide input voltage range of 4.5-75V.
LM5017SD/NOPB
LM5017SD/NOPB by Texas Instruments is a switching regulator with a max output voltage of 90V and max output current of 0.6A. Ideal for automotive applications, it operates b/w -40 to 125°C, with a switching frequency up to 1MHz.
LM5017SDE/NOPB
LM5017SDE/NOPB by Texas Instruments is a switching regulator with 8 terminals, operating b/w -40 to 125°C. It offers a max output voltage of 90V and current of 0.6A, suitable for automotive applications due to its compact size and high switching frequency of up to 1000 kHz.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved