Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MP20073DH-LF by Monolithic Power Systems is a DDR termination regulator with 8 terminals in a small outline package. It operates b/w -40°C to 85°C, making it suitable for various applications requiring precise voltage regulation in compact spaces. The Gull Wing terminal form and square package shape enhance its versatility for surface mount designs.
Median Price
$1.300
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Monolithic Power Systems
1+ parts
100+ parts
$0.890
1k+ parts
-
10k+ parts
Nova Conductors
$0.735
Vyrian
Aranea Global
$0.720
$0.691
Continental Prestige Electronics
Argo Parts USA
Ampacity Inc.
$1.100
AZTECH Wire
$14.960
Kepictronics
This material provides durability and protection for the internal components, making it ideal for various environments and applications.
Allows for easy and efficient installation on PCBs, saving space and reducing assembly time.
The square shape helps with efficient placement on the PCB and can optimize space usage.
Gull wing terminals provide strong mechanical support and are easy to solder onto the PCB, ensuring reliable connections.
Having 8 terminals allows for a more precise and stable connection with other components in the circuit.
With a high maximum operating temperature, this regulator can withstand elevated temperatures and perform reliably in various conditions.
The small terminal pitch enables a compact design and allows for more terminals to be placed in a limited space, increasing functionality.
The low minimum operating temperature ensures the regulator can function effectively even in cold environments.
This specific regulator type ensures precise voltage regulation and efficient power distribution in DDR applications.
The low seated height helps with minimizing the overall profile of the product, making it suitable for compact electronic devices.
The compact width contributes to space-saving on the PCB and allows for more components to be integrated into the design.
The small length dimension further enhances the compactness of the product, making it suitable for applications with size constraints.
Other Function Regulators MP20073DH-LF attributes and parameters. Explore more Other Function Regulators devices from Monolithic Power Systems
JESD-30 Code:
Length:
No. of Functions:
No. of Outputs:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Regulator Type:
Maximum Seated Height:
Surface Mount:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
MP20073DH-LF Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
It started with a vision. Michael Hsing, pioneering engineer and CEO, founded Monolithic Power Systems, Inc. in 1997 with the belief that an entire power system could be integrated onto a single chip. Under his leadership, MPS has succeeded not only in developing a monolithic power module that truly integrates an entire power system in a single package, but also it continues to defy industry expectations with its patented groundbreaking technologies. We make power design fun! With our innovative proprietary technology processes, we thrive on re-imagining and re-defining the possibilities of high-performance power solutions in industrial applications, telecom infrastructures, cloud computing, automotive, and consumer applications. We are creative thinkers. We break boundaries. We take technology to new levels. As a leading international semiconductor company, Monolithic Power Systems (MPS) creates cutting-edge solutions to improve the quality of life with green, easy-to-use products.
ULN2803A
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
BSS138
Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.
2N7002
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
SMBJ18CA
Secos
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
L78L05ABZ-AP
STMicroelectronics
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
DS18B20Z
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Accuracy (Cel): 0.50;
2N2222A
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
M24308/2-1F
Defense Logistics Agency
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE AND PANEL; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Empty Shell: NO;
General Semiconductor
1N4148WS
Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.
MBR130T1G
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
LM555CN
Texas Instruments
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
RC0402FR-071KL
Yageo
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
LP38512MR-ADJ/NOPB
National Semiconductor
Other Regulators; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Adjustability: ADJUSTABLE; Maximum Line Regulation (%/V): .06;
LM104L
LM104L by Texas Instruments is a BIPOLAR regulator with adjustable output voltage from -0.015V to -40V. It has 10 terminals in a round metal package, suitable for applications requiring precise voltage regulation in temperatures ranging from -55°C to 125°C.
TA78L24F(TE12L,F)
Toshiba
Toshiba's TA78L24F(TE12L,F) is a 3-terminal fixed voltage regulator with an output of 24V and max load regulation of 0.2%. Operating temperature ranges from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage supply in a surface-mount package.
LM7805
Unisonic Technologies
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Pitch: 2.54 mm; Operating Temperature (TJ-Min): 0 Cel;
NCP51403MNTXG
NCP51403MNTXG by Onsemi is a DDR termination regulator with a max operating temperature of 125°C and min operating temperature of -40°C. It comes in a small outline package style with very thin profile, suitable for surface mount applications. With 10 terminals and square package shape, it is ideal for compact electronic devices.
LP2996MX/NOPB
LP2996MX/NOPB by Texas Instruments is a DDR termination regulator with 1.5A max output current and 0.9V min output voltage. It comes in a small outline package, suitable for surface mount applications like power management in electronic devices.
LP2996MR/NOPB
LP2996MR/NOPB by Texas Instruments is a DDR termination regulator with 1.5A max output current and 0.9V min output voltage. This surface-mount device in a small outline package is ideal for low-profile applications requiring precise voltage regulation, such as memory modules and portable electronics.
UA7905CKC1
UA7905CKC1 by Texas Instruments is a bipolar fixed voltage regulator with an output of -5V and max current of 1.5A. It has a package body material of PLASTIC/EPOXY, operates b/w 0-125°C, and can handle input voltages up to 35V. Ideal for applications requiring precise voltage regulation in various electronic devices.
MAX1510ETB+
Maxim Integrated
DDR TERMINATION REGULATOR; No. of Terminals: 10; Package Code: HVSON; Terminal Form: NO LEAD; JESD-30 Code: S-PDSO-G8; Package Style (Meter): SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE;
UA7815CKCP3
UA7815CKCP3 by Texas Instruments is a fixed 15V bipolar regulator with 3 terminals. It offers a max voltage tolerance of 5% and max load regulation of 0.3%. This device, made from plastic/epoxy, operates at temperatures up to 125°C and is commonly used in various electronic applications.
UA723CN3
UA723CN3 by Texas Instruments is a bipolar technology regulator with 14 terminals and adjustable output voltage from 2V to 37V. It offers excellent load regulation of 0.6% and line regulation of 0.02%/V, making it ideal for precision applications in various industries such as automotive, industrial, and telecommunications.
LM78L05AIMX/NOPB
Other Regulators; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
UA79M05CKDP1
UA79M05CKDP1 by Texas Instruments is a -5V fixed voltage regulator with 0-125°C operating temperature range. It features 3 terminals, 2.54mm terminal pitch, and can handle up to 0.5A output current. Ideal for applications requiring precise voltage regulation in electronic circuits.
LM340S-5.0
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Adjustability: FIXED; Qualification Status: Not Qualified;
LM317KC3
LM317KC3 by Texas Instruments is an adjustable voltage regulator with a max output voltage of 37V and max output current of 1.5A. Operating temperature ranges from 0 to 125°C, making it suitable for various applications in electronics requiring precise voltage regulation. With a compact package body material made of plastic/epoxy, it offers flexibility and reliability in circuit design.
UA78L09CJG4
UA78L09CJG4 by Texas Instruments is a fixed 9V voltage regulator with a max output current of 0.1A and a dropout voltage of 3.9V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable power supply within a ceramic package body material.
FS8860-CJ
Fortune Semiconductor
FS8860-CJ by Fortune Semiconductor is a CMOS regulator with adjustable output voltage from 1.25V to 5V, ideal for applications requiring up to 1A current. It offers high load regulation of 15% and operates in temperatures ranging from -40°C to 125°C, making it suitable for various electronic devices.
UA78M22CKDP3
UA78M22CKDP3 by Texas Instruments is a fixed 22V bipolar regulator with 3 terminals and plastic/epoxy package. It operates b/w 0-125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits. With a terminal pitch of 2.54mm, it is commonly used in power supply designs for industrial and consumer electronics.
LM305H
General Electric Solid State
Other Regulators; No. of Terminals: 8; Terminal Form: WIRE; Terminal Finish: Tin/Lead (Sn/Pb); No. of Outputs: 1; Minimum Operating Temperature: 0 Cel;
LP2996AMRX/NOPB
LP2996AMRX/NOPB by Texas Instruments is a DDR termination regulator with 1.5A max output current and 0.677V min output voltage. It comes in a small outline package suitable for surface mount applications, making it ideal for low-profile designs in various electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MP20073DH-LF-Z
DDR TERMINATION REGULATOR; No. of Terminals: 8; Package Code: HTSSOP; Terminal Form: GULL WING; No. of Functions: 1; Package Style (Meter): SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH;
MP20075DH-LF-Z
DDR TERMINATION REGULATOR; No. of Terminals: 8; Package Code: HTSSOP; Terminal Form: GULL WING; Package Body Material: PLASTIC/EPOXY; Package Style (Meter): SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH;
MP20075DH-LF
DDR TERMINATION REGULATOR; No. of Terminals: 8; Package Code: HTSSOP; Terminal Form: GULL WING; Package Style (Meter): SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH; Maximum Seated Height: 1.1 mm;
MP20075DH-Z
DDR TERMINATION REGULATOR; No. of Terminals: 8; Package Code: HTSSOP; Terminal Form: GULL WING; Length: 3 mm; Surface Mount: YES;
MP20075DH
DDR TERMINATION REGULATOR; No. of Terminals: 8; Package Code: HTSSOP; Terminal Form: GULL WING; Terminal Pitch: .65 mm; No. of Outputs: 1;
MP20073DH-Z
DDR TERMINATION REGULATOR; No. of Terminals: 8; Package Code: HTSSOP; Terminal Form: GULL WING; Terminal Pitch: .65 mm; Maximum Seated Height: 1.1 mm;
MP20073DH
DDR TERMINATION REGULATOR; No. of Terminals: 8; Package Code: HTSSOP; Terminal Form: GULL WING; Surface Mount: YES; Maximum Seated Height: 1.1 mm;
MP2007DH-LF-Z
DDR TERMINATION REGULATOR; No. of Terminals: 8; Package Code: HTSSOP; Terminal Form: GULL WING; Maximum Operating Temperature: 85 Cel; Package Body Material: PLASTIC/EPOXY;
MP2007DH-LF
DDR TERMINATION REGULATOR; No. of Terminals: 8; Package Code: HTSSOP; Terminal Form: GULL WING; Maximum Operating Temperature: 85 Cel; Package Shape: SQUARE;
MP2007DH-Z
DDR TERMINATION REGULATOR; No. of Terminals: 8; Package Code: HTSSOP; Terminal Form: GULL WING; Package Style (Meter): SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH; Width: 3 mm;
MP2007DH
DDR TERMINATION REGULATOR; No. of Terminals: 8; Package Code: HTSSOP; Terminal Form: GULL WING; Minimum Operating Temperature: -40 Cel; Package Style (Meter): SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH;
MP20075H-LF-Z
DDR TERMINATION REGULATOR; No. of Terminals: 8; Package Code: HTSSOP; Terminal Form: GULL WING; No. of Functions: 1; Package Shape: SQUARE;
MP20075H-LF
DDR TERMINATION REGULATOR; No. of Terminals: 8; Package Code: HTSSOP; Terminal Form: GULL WING; Package Style (Meter): SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH; Maximum Operating Temperature: 85 Cel;
MP20075H-Z
DDR TERMINATION REGULATOR; No. of Terminals: 8; Package Code: HTSSOP; Terminal Form: GULL WING; Terminal Pitch: .65 mm; JESD-30 Code: S-PDSO-G8;
MP20075H
DDR TERMINATION REGULATOR; No. of Terminals: 8; Package Code: HTSSOP; Terminal Form: GULL WING; JESD-30 Code: S-PDSO-G8; Width: 3 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved