Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
OT PLD; Grading Of Temperature: MILITARY; Form Of Terminal: THROUGH-HOLE; No. of Terminals: 24; Package Code: DIP; Package Shape: RECTANGULAR;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Programmable Logic Devices (PLD) PAL20L8AMJSC attributes and parameters. Explore more Programmable Logic Devices (PLD) devices from Monolithic Memories
Programmable IC Type:
No. of Outputs:
Output Function:
No. of Inputs:
No. of Product Terms:
Propagation Delay:
Technology:
Architecture:
Sub-Category:
Nominal Supply Voltage:
Power Supplies (V):
Maximum Operating Temperature:
Minimum Operating Temperature:
Temprature Grade:
Package Body Material:
Package Style (Meter):
Package Code:
Package Shape:
Package Equivalence Code:
Terminal Position:
Terminal Form:
No. of Terminals:
Terminal Pitch:
Terminal Finish:
JESD-30 Code:
JESD-609 Code:
Qualified:
Screening Level:
PAL20L8AMJSC Programmable ICs trade compliance attributes, and parameters.
ECCN
3A001.A.2.C
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Monolithic Memories, Inc. produced bipolar PROMs, programmable logic devices, and logic circuits. A team of MMI engineers, under the direction of Ze'ev Drori and headed by John Birkner and H. T. Chua, invented the class of devices known as Programmable Array Logic. MMI was founded in 1969 by former Fairchild Semiconductor engineer Ze'ev Drori, later the President and CEO of Tesla Motors. In 1987, under the stewardship of President Irwin Federman, it was merged with Advanced Micro Devices in a $422 million stock swap to become the world's largest integrated circuit manufacturer. AMD later spun off their programmable logic division as Vantis, which was then acquired by Lattice Semiconductor.
SS14
Jinan Jingheng Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
2N7002
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
SMBJ18CA
Dc Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
BAV99
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
MMBT2907ALT1G
Onsemi
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
STM32H743ZIT6
STMicroelectronics
STM32H743ZIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications, offering features such as 21 timers, CAN and USB connectivity, and low power mode.
1N4148W-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
CL31B104KBCNNNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.
LM317LMX/NOPB
LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
1N4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Tesla Elektronicke Soucastky
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
ATF1504ASVL-20JU44
Microchip Technology
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: J BEND; No. of Terminals: 44; Package Code: QCCJ; Package Shape: SQUARE;
EPM570T100C3N
Intel
EPM570T100C3N by Intel is a Programmable Logic Device with 440 macro cells, 76 inputs/outputs, and a propagation delay of 5.4 ns. It uses CMOS technology and is suitable for applications requiring in-system programmability and JTAG boundary scan testing in electronic systems.
ISPLSI1048E-70LQN
Lattice Semiconductor
ISPLSI1048E-70LQN by Lattice Semiconductor is a PLD with 192 macro cells, 96 I/O lines, and 18.5 ns propagation delay. It is used for applications requiring in-system programmability, such as digital signal processing and control systems. The device operates at temperatures ranging from 0 to 70°C and has a max clock frequency of 56 MHz.
ATF22V10CQZ-20JU
Atmel
FLASH PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: J BEND; No. of Terminals: 28; Package Code: QCCJ; Package Shape: SQUARE;
GAL16V8D-25QJNI
GAL16V8D-25QJNI by Lattice Semiconductor is a 5.5V CMOS PLD with 25ns propagation delay, ideal for industrial applications. Featuring 18 inputs and 8 I/O lines, this EE PLD offers a clock frequency of up to 37MHz and operates b/w -40°C to 85°C. Its square chip carrier package with J bend terminals makes it suitable for various programmable logic tasks.
5M570ZF256C5N
The Intel 5M570ZF256C5N is a FLASH PLD with 440 macro cells, 159 I/O lines, and a max clock frequency of 118.3 MHz. It is used in applications requiring programmable logic devices with low profile grid array package style for surface mount technology. The device offers fast propagation delay of 17.7 ns and operates at temperatures ranging from 0 to 85°C.
ATF22V10CQ-15PC
Atmel's ATF22V10CQ-15PC is a PLD with 15ns propagation delay, 5.25V max supply voltage, and CMOS technology. Ideal for applications requiring PAL-type architecture, it offers 132 product terms, operates at up to 55.5MHz clock frequency, and has 10 dedicated inputs and I/O lines.
EPM570T100C5N
The Intel EPM570T100C5N is a Flash PLD with 440 macro cells, 76 I/O lines, and 8.7ns propagation delay. It uses CMOS technology and has a max supply voltage of 2.625V. Ideal for applications requiring programmable logic devices with fast signal processing capabilities.
EPF10K50RI240-4N
Altera
LOADABLE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 240; Package Code: HFQFP; Package Shape: SQUARE;
EPM7128STC100-15C
The EPM7128STC100-15C by Altera is a programmable logic device with a maximum clock frequency of 76.9 MHz and a propagation delay of 15 ns. It has 80 I/O lines and can operate with either 3.3V or 5V. This PLD is commonly used in applications requiring configurable I/O operations.
XC2C128-7TQG144I
Xilinx
Xilinx XC2C128-7TQG144I is a 128 macrocell FLASH PLD with 100 I/O lines, operating at up to 119 MHz. It features a propagation delay of 7.5 ns and can be in-system programmable. Ideal for industrial applications requiring high-speed processing and versatile I/O capabilities in a compact form factor.
EPM570ZM100C6N
The Intel EPM570ZM100C6N is a FLASH PLD with 440 macro cells, 76 I/O lines, and 9.5 ns propagation delay. It uses CMOS technology and has a max supply voltage of 1.89 V. Ideal for applications requiring programmable logic devices with fast response times and high input/output capabilities in compact form factors.
XC2C64A-5VQ100C
XC2C64A-5VQ100C by Xilinx is a 64 macrocell FLASH PLD with 5 ns propagation delay, operating at up to 333 MHz. It features in-system programmability and 64 I/O lines, suitable for applications requiring fast processing speeds and versatile I/O configurations in commercial-grade environments.
ATF1508ASV-15JU84
Microchip Technology's ATF1508ASV-15JU84 is a 128 macro cell EE PLD with 64 I/O lines. It has a propagation delay of 15 ns, operates at a max clock frequency of 100 MHz, and supports JTAG boundary scan testing. Ideal for industrial applications requiring fast processing speeds and high I/O capabilities.
EP1K50TC144-2N
EP1K50TC144-2N by Intel is a PLD with 2880 logic cells, 0.4 ns propagation delay, and 102 inputs. It operates at 2.5V, has a clock frequency of 37.5 MHz, and is suitable for applications requiring high-speed processing in commercial temperature environments.
GAL22V10D-10LJN
GAL22V10D-10LJN by Lattice Semiconductor is a 5V EE PLD with 22 inputs, 10 I/O lines, and 10ns propagation delay. It's used in PAL-type architecture for applications requiring a max clock frequency of 83.3MHz and operating temperature range of 0-75°C.
EPM7192SQI160-10N
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 160; Package Code: QFP; Package Shape: SQUARE;
EPM3032ATC44-7
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: GULL WING; No. of Terminals: 44; Package Code: LQFP; Package Shape: SQUARE;
XC95144XL-5TQG144C
The Xilinx XC95144XL-5TQG144C is a 144 macrocell FLASH PLD with 117 I/O lines, operating at up to 138.88 MHz. It features a propagation delay of 5 ns and can be in-system programmable. Ideal for applications requiring fast processing speeds and high I/O capabilities in commercial-grade environments.
EPM3064ATC100-10N
Intel's EPM3064ATC100-10N is a 64-macrocell EE PLD with 10ns propagation delay, operating at max 100MHz clock frequency. It features in-system programmability and JTAG boundary scan test for versatile applications in commercial-grade systems requiring fast processing speeds. The device supports a wide voltage range of 2.5/3.3V and has 66 I/O lines for efficient data transfer in various electronic designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Monolithic Memories
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved