Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RECTANGULAR POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
Median Price
$1.152
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Verical
1+ parts
$1.010
100+ parts
-
1k+ parts
$0.970
10k+ parts
Interstate Connecting
$1.175
$0.985
Heilind Electronics
$1.264
$1.031
Arrow
$2.497
$2.116
Master Electronics
$0.949
$0.908
$0.847
Chip1Stop
$1.130
$1.020
DigiKey
$1.070
$0.990
Farnell
$1.300
$1.220
Digiode
$0.960
Vyrian
VNN
TestEquity
$1.080
TME
$1.290
$1.110
$1.060
IBS Electronics
$0.963
Corphita
$0.909
Andel Nordic
$9.199
$8.831
Power Connectors 93445-4203 attributes and parameters. Explore more Power Connectors devices from Molex
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Material:
93445-4203 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Obsolescence/ EOL - DK OBS NOTICE
PCN Design/Specification - Product Enhancements 29/Jun/2017
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
2N2222A
Comset Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
IRLML6402TRPBF
Infineon Technologies
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
Semiconductor Technology
1N4148WS
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
LM358N
Harris Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM317TG
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
SMBJ18CA
Semitron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDV303N
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
M24308/2-1F
Itt Cannon
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Filter Feature: NO;
ECA2DHG4R7
Panasonic
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
CRCW06031K00FKEAHP
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
EU2B-YS3103F
Idec
ROTARY SWITCH;
1N4148
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
Boca Semiconductor
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
43045-1000
Molex
The Molex 43045-1000 is a rectangular power connector with 10 contacts, featuring bright tin termination finish and LCP insulator material. It has a mating contact pitch of 0.118", withstands up to 1500VAC, and operates b/w -40°C to 105°C. Ideal for board mounting applications in commercial settings due to its durability and UL certification.
66484-001
AMPHENOL ICC
Amphenol Icc 66484-001 is a RECTANGULAR POWER CONNECTOR with POLYAMIDE insulator, UL 94V-2 flammability rating. Featuring 4 FEMALE contacts for CABLE AND PANEL mounting, it's ideal for power applications requiring reliable wire termination.
5025780400
Molex 5025780400 is a RECTANGULAR POWER CONNECTOR with 4 contacts, 0.059" pitch, and 0.406" body length. It uses POLYBUTYLENE TEREPHTHALATE insulator for cable mounting applications in commercial settings.
1723103108
Molex 1723103108 Power Connector has dimensions of 1.232" x 0.352" x 0.614". It uses Liquid Crystal Polymer insulator, operates b/w -40°C to 105°C, and has UL Flammability Code 94V-0. Ideal for board mounting applications requiring a male SQ PIN-SKT contact style with 8 contacts.
172298-1210
RECTANGULAR POWER CONNECTOR; Termination Contact Finish: MATTE TIN OVER NICKEL; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
1827540-1
TE Connectivity
TE Connectivity's 1827540-1 is a rectangular power connector with 48 contacts in 3 loaded rows. It has an operating temperature range of -55 to 105°C, suitable for cable mounting applications. The insulator material is glass filled polyethylene/polyester, and it features crimp termination and a receptacle shell style.
828907-1
Tyco Electronics Amp
RECTANGULAR POWER CONNECTOR; Contact Gender: FEMALE; Mating Contact Finish: NOT SPECIFIED; MIL Conformity: NO; Filter Feature: NO; Total No. of Contacts: 55;
1-641737-1
TE Connectivity 1-641737-1 is a power connector with body dimensions of 1" x 0.345" x 0.484". It has an insulation resistance of 500M ohm, rated current of 12A, and operates b/w -55 to 105°C. Ideal for board mounting applications, it features a polarized design with white insulator color and POLYAMIDE material.
1720650004
Molex 1720650004 is a rectangular power connector with 4 contacts, featuring liquid crystal polymer insulator and matte tin over nickel finish. Withstanding voltage of 2200VAC, it operates b/w -40 to 105 °C, ideal for commercial applications requiring durable solder termination on boards.
39-30-2042
Molex 39-30-2042 is a RECTANGULAR POWER CONNECTOR with 4 contacts, Matte Tin finish. Made of POLYAMIDE66, it has UL94V-0 flammability rating. Ideal for board mounting, solder termination, and male contact gender applications.
43045-0413
The Molex 43045-0413 is a rectangular power connector with 4 contacts, rated at 5A signal current. It features a mating contact pitch of 0.118", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for board mounting applications requiring durability and reliability under commercial standards.
105405-1312
RECTANGULAR POWER CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
44300-0800
The Molex 44300-0800 is a rectangular power connector with 8 contacts, featuring a mating contact pitch of 0.118", insulation resistance of 1G ohm, and operating temperatures from -40 to 105°C. Ideal for commercial applications, it offers crimp termination, polarized housing, and UL94V-0 flammability rating.
19-09-1029
The Molex 19-09-1029 is a RECTANGULAR POWER CONNECTOR with POLYAMIDE66 insulator material. It has 2 contacts, FEMALE gender, and CRIMP termination type. Ideal for PANEL mounting in commercial applications due to its compact dimensions of 0.56" x 0.5" x 1.18".
43650-0501
The Molex 43650-0501 is a rectangular power connector with 5 contacts, featuring a mating contact pitch of 0.118" and body width of 0.172". Ideal for board mounting applications, it has a termination contact finish of TIN OVER NICKEL and insulator material made of GLASS FILLED LIQUID CRYSTAL POLYMER.
39-29-9046
The Molex 39-29-9046 is a rectangular power connector with 4 contacts, made of brass and tin/copper finish. It has a dielectric voltage of 1500VAC, insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for board mounting applications in commercial settings due to its durability and UL flammability rating.
43045-0424
The Molex 43045-0424 is a rectangular power connector with 4 contacts, featuring insulation resistance of 1 Gohm and operating temperatures from -40 to 105°C. It has a body width of 0.29" and depth of 0.39", suitable for board mounting applications with solder termination.
1-350777-1
TE Connectivity 1-350777-1 is a RECTANGULAR POWER CONNECTOR with POLYAMIDE insulator. It has 2 contacts, operates b/w -55 to 105°C, and UL94V-0 flammability rating. Ideal for power applications requiring CRIMP termination on CABLE mountings.
1-480709-0
TE Connectivity 1-480709-0 is a RECTANGULAR POWER CONNECTOR with POLYAMIDE insulator. It has 12 contacts arranged in S0P12 pattern, suitable for PANEL mounting. Operating temp range -55 to 105 °C makes it ideal for commercial applications requiring high durability and insulation resistance of 100M ohm.
43650-0201
The Molex 43650-0201 is a rectangular power connector with a mating contact pitch of 0.118". Featuring matte tin over nickel termination, it has a body width of 0.172" and insulator made of glass-filled liquid crystal polymer. Ideal for board mounting applications, this connector offers reliable performance in commercial settings.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved