Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Termination Contact Finish: NOT APPLICABLE; Maximum Insertion Force (N): 2.9468;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Andel Nordic
$9.132
$8.767
Corphita
Headers & Edge Type Connectors 90156-0153 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Durability:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Type:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Minimum Withdrawal Force (N):
90156-0153 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
LM317T
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
BAV99
Plessey Semiconductors Discrete Components Div
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Texas Instruments
ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.
1N4148WS
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Comchip Technology
LM358AN
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Renesas Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CL10B104KB8NNNC
Samsung Electro-mechanics
CL10B104KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in various electronic devices. With dimensions of 1.6mm x 0.8mm x 0.9mm, it operates b/w -55 to 125 °C providing stable performance in compact designs.
SMBJ18CA
Yageo
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDLL4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
CDSOT23-SM712
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
BAT54SLT1G
Onsemi
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
2N2222A
Loras Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Surge Components
Dc Components
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
STM32F401CDY6TR
STMicroelectronics
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
VHR-8N
J S T Mfg
VHR-8N by J S T Mfg is a 0.156" pitch BOARD CONNECTOR with 8 contacts, POLYAMIDE insulator, and 1500VAC dielectric voltage. Ideal for cable mounting applications, it has a temperature range of -25 to 85°C and UL94V-0 flammability rating.
DF40C-100DP-0.4V(51)
Hirose Electric
DF40C-100DP-0.4V(51) by Hirose Electric is a 100-contact board stacking connector with 0.016" pitch, 100VAC dielectric voltage, and gold termination finish. Ideal for PCB applications requiring a durable, polarized male plug with liquid crystal polymer insulator material. Operating temperature range from -35 to 85°C makes it suitable for commercial use in various electronic devices.
FTSH-105-01-L-DV-K-A-P-TR
Samtec
Samtec FTSH-105-01-L-DV-K-A-P-TR is a 2-row, 10-contact board connector with a mating contact pitch of 0.05". Featuring liquid crystal polymer insulator material and gold over nickel finish, it operates b/w -55°C to 125°C. Ideal for commercial applications requiring reliable surface mount connections on PCBs.
DF11-16DP-2DSA(01)
DF11-16DP-2DSA(01) by Hirose Electric is a 16-contact board connector with 0.079" pitch, 650VAC dielectric voltage, and gold finish. It is used in applications requiring a durable, high-current signal connection with UL and CSA standards compliance. The connector has a straight mounting style, black insulator color, and operates b/w -30 to 85°C temperatures.
2-640456-3
TE Connectivity
TE Connectivity 2-640456-3 is a 23-contact board connector with 0.1" pitch, suitable for commercial applications. Featuring tin finish, it operates b/w -55 to 105°C and has UL94V-0 flammability rating. Ideal for PCBs, this male plug connector has a rectangular contact pattern and solder termination.
746-010-520-606
Edac
Edac 746-010-520-606 is a 2-row card edge connector with 10 contacts. It has a mating contact pitch of 0.125", insulation resistance of 5Gohm, and dielectric voltage of 1500VAC. Ideal for PCB applications requiring high current signal transmission in temperatures ranging from -40 to 105°C.
MTSW-102-07-G-S-240
Samtec's MTSW-102-07-G-S-240 is a board stacking connector with 0.1" pitch, gold-plated contacts, and glass-filled polyester insulator. Ideal for commercial applications, it features 2.54mm terminal pitch, solder termination, and male contact gender for reliable PCB connections.
796136-1
TE Connectivity 796136-1 is a PCB connector with Liquid Crystal Polymer insulator. It has 2 contacts, rated at 7A for signal current. With right-angle mounting style and compression contact, it's ideal for applications requiring a compact design and high operating temperatures up to 100°C.
53047-0710
Molex
Molex 53047-0710 is a board connector with 7 contacts, 0.049" pitch, and TIN finish. It features POLYAMIDE insulator, UL 94V-0 flammability rating, and polarized housing. Ideal for commercial applications requiring reliable straight mounting with solder termination.
47309-2651
Molex 47309-2651 is a PCB connector with 0.043" pitch, GOLD finish, and 100000000 ohm insulation resistance. Ideal for commercial applications, it has a durability of 10000 cycles and operates b/w -40 to 85 °C.
351-10-139-00-004101
Preci-dip Sa
351-10-139-00-004101 by Preci-dip Sa is a BOARD CONNECTOR with GOLD contact finish. Featuring 39 contacts on a 2.54mm pitch, it is ideal for board mounting applications requiring male BRASS contacts. With UL Flammability Code of 94V-0, this STRAIGHT mounting style connector ensures reliable solder termination.
53313-3465
Molex 53313-3465 is a 34-contact board connector with TIN finish. Featuring 2 loaded rows, it has a terminal pitch of 2mm and UL94V-0 flammability rating. Ideal for applications requiring male contacts, solder termination, and straight mounting style.
22-28-5123
The Molex 22-28-5123 is a board connector with 12 contacts, rated at 4A signal current. It features a mating contact pitch of 0.1", insulation resistance of 50Gohm, and dielectric voltage withstand of 1500VAC. Ideal for commercial applications requiring durable connectors with solder termination and rectangular PCB contact pattern.
DF40C-80DP-0.4V(51)
DF40C-80DP-0.4V(51) by Hirose Electric is a 2-row, 80-contact board stacking connector with gold-plated phosphor bronze contacts. Featuring a mating contact pitch of 0.016", it offers high insulation resistance of 50M ohm and withstands up to 100VAC. Ideal for PCB applications requiring reliable signal transmission in commercial environments at temperatures ranging from -35°C to 85°C.
50-57-9004
The Molex 50-57-9004 is a board connector with 0.1" mating contact pitch, 0.099" body width, and 0.6" body depth. It features glass-filled polyester insulator material and UL 94V-0 flammability code. Ideal for commercial applications requiring a reliable 4-contact female connector with crimp termination on cables.
640456-6
TE Connectivity 640456-6 is a board connector with 0.1" pitch, suitable for commercial applications. Featuring TIN finish, it has 6 contacts and operates b/w -55 to 105°C. With a rectangular contact pattern, it offers a rated current of 5A and solder termination for male connectors.
1-640456-6
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; JESD-609 Code: e3; Mounting Type: BOARD;
1-2199230-5
TE Connectivity 1-2199230-5 is a POLYETHYLENE card edge connector with 67 contacts in a 2-row configuration. It has a mating contact pitch of 0.5", operates b/w -40 to 80°C, and features a right-angle mounting style for board applications. Ideal for PCBs requiring 0.5A signal current rating.
SM06B-GHS-TB(LF)(SN)
SM06B-GHS-TB(LF)(SN) by J S T Mfg is a 10.75" header connector with 0.049" pitch, suitable for board mounting applications. Featuring TIN finish, POLYAMIDE insulator, and PHOSPHOR BRONZE contacts, it offers 500VAC voltage withstand and operates b/w -25 to 85 °C. Ideal for signal currents up to 1A, this UL-rated connector has a polarized housing and right-angle mounting option.
B6B-ZR(LF)(SN)
B6B-ZR(LF)(SN) by J S T Mfg is a 6-contact BOARD CONNECTOR with 0.059" pitch, GLASS FILLED POLYAMIDE66 insulator, and 500VAC dielectric voltage. It operates b/w -25 to 85 °C, suitable for applications requiring high insulation resistance and UL94V-0 flammability rating.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved