Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 90148-1104 header connector has 0.1" pitch, 350VAC voltage withstand, and 3A signal current rating. Ideal for board connections in commercial applications with UL and CSA standards compliance.
Median Price
$0.737
Lifecycle Status
Suppliers In-Stock
21
In-Stock Inventory
1k+
Interstate Connecting
1+ parts
$0.648
100+ parts
-
1k+ parts
$0.543
10k+ parts
$0.513
Heilind Electronics
$0.667
$0.559
Adafruit Industries
$0.738
Mouser Electronics
$0.960
$0.639
$0.545
Distrelec
$1.022
$0.848
$0.717
DigiKey
$1.400
$0.986
$0.778
$0.675
Chip1Stop
$0.646
Master Electronics
$0.440
Verical
$0.460
Powell Electronics
$0.467
RS (Exports)
$0.886
$0.756
Newark
$0.968
$0.835
Farnell
$0.699
$0.413
Digiode
$0.701
Nova Conductors
$0.724
TestEquity
$0.770
IBS Electronics
$0.700
$0.625
Vyrian
VNN
NAC Semi
ECAB
Semicontronic
$0.620
$0.604
$0.601
Corphita
$0.664
Argo Parts USA
Netroflash
$0.709
Continental Prestige Electronics
Advanced Electronics
Aztec Data Supply Inc.
$2.077
Andel Nordic
$3.395
$3.259
Perfect Parts
Assy Fe
0.1 - Provides reliable electrical connection with standard spacing.
0.4 inch - Compact size allows for space-saving design.
1000000000 ohm - Ensures high electrical insulation for safety.
0.13 inch - Slim design suitable for applications with limited space.
350VAC - Meets safety requirements for voltage resistance.
Matte Tin (Sn) - with Nickel (Ni) barrier - Provides durable and corrosion-resistant finish for long-term use.
0.335 inch - Offers a secure fit on the PCB.
GLASS FILLED POLYESTER - Provides strength and durability for a reliable connection.
125 - Suitable for a wide range of operating conditions.
7.62 - Allows for easy PCB installation and alignment.
55 °C - Ensures functionality in low-temperature environments.
160u - Provides a thick plating for enhanced conductivity and durability.
2 - Allows for multiple connections on the same board.
BOARD CONNECTOR - Specifically designed for PCB applications.
94V-0 - Meets safety standards for fire resistance.
3 A - Supports high current signals for various applications.
BLACK - Offers a sleek and professional appearance.
UL, CSA - Meets industry standards for quality and safety.
4 - Provides multiple connection points for flexibility.
ONE - Easy and straightforward to install.
BOARD - Securely mounts onto the PCB for stability.
2.54 - Standard pitch for easy compatibility with other components.
RECTANGULAR - Ensures proper alignment and connectivity.
SOLDER - Allows for easy and reliable soldering.
0.1668 - Provides a secure and stable connection.
FEMALE - Compatible with corresponding male connectors for a secure fit.
20 mohm - Offers low resistance for efficient signal transmission.
RECEPTACLE - Designed for easy and secure connection.
RIGHT ANGLE - Ideal for applications where space is limited.
SQ PIN-SKT - Ensures a secure and reliable connection.
2.9468 - Provides a firm and stable connection upon insertion.
0.114 inch - Suitable for various PCB thicknesses.
COMMERCIAL - Ensures long-lasting performance in commercial applications.
Headers & Edge Type Connectors 90148-1104 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Plating Thickness (inch):
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Minimum Withdrawal Force (N):
90148-1104 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
SMBJ18CA
Secos
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
2N2222A
Fairchild Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LIS2DH12TR
STMicroelectronics
LIS2DH12TR by STMicroelectronics is a 3-axis accelerometer with digital voltage output. It operates b/w -40 to 85°C, with supply voltage range of 1.71-3.6V. Ideal for applications requiring precise motion sensing in compact spaces like wearables and IoT devices.
1N4148
Rochester Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
2N7002
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
Uniohm
Cheng-yi Electronic
Excel (Suzhou) Semiconductor
SS14
Zowie Technology
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Operating Temperature: 125 Cel; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: 30 A;
1N4148WS
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
BSS138BK,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
Leshan Radio
FDC5614P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
B3B-ZR-SM4-TF(LF)(SN)
J S T Mfg
B3B-ZR-SM4-TF(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 3 contacts, BRASS material, and Tin (Sn) finish. It has a terminal pitch of 1.5mm and is ideal for surface mount applications in headers & edge type connectors.
2-5767004-2
TE Connectivity
TE Connectivity 2-5767004-2 is a board stacking connector with 39 contacts, rated at 11.5A for signal current. It features a mating contact pitch of 0.025", insulation resistance of 2M ohm, and dielectric voltage withstand of 500VAC. Ideal for commercial applications requiring reliable connections in temperatures ranging from -55 to 125°C.
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
53047-0410
Molex 53047-0410 is a board connector with 4 contacts, 1.25mm terminal pitch, and 0.09" terminal length. It features a polarized housing, solder termination, and UL94V-0 flammability rating. Ideal for commercial applications requiring reliable rectangular PCB contact patterns.
S6B-PH-SM4-TB(LF)(SN)
S6B-PH-SM4-TB(LF)(SN) by J S T Mfg is a 6-contact board connector with 0.079" pitch, 800VAC dielectric voltage, and -25 to 85°C operating range. Ideal for PCB applications requiring male contact, surface mount termination, and right-angle mounting.
1-1761606-3
TE Connectivity 1-1761606-3 is a 2-row, 40-contact board connector with a mating contact pitch of 0.1". Featuring POLYBUTYLENE TEREPHTHALATE insulator material and rated for up to 1A signal current, it is ideal for commercial applications requiring reliable connections in temperatures ranging from -65°C to 105°C.
1761606-3
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Manufacturer Series: 1761606; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
B4PS-VH(LF)(SN)
B4PS-VH(LF)(SN) by J S T Mfg is a 4-contact board connector with a mating contact pitch of 0.156 inches. It has a body length of 0.621 inch and insulation resistance of 1,000,000,000 ohms. This connector is commonly used in applications requiring a right angle mounting style and solder termination type.
51021-0700
The Molex 51021-0700 is a board connector with 7 contacts, 0.049" pitch, and 0.413" body length. It has an insulation resistance of 100M ohm and operates b/w -40°C to 85°C. Ideal for commercial applications requiring a female crimp termination in a locking receptacle design.
1042240820
Molex 1042240820 is a PCB connector with 0.1" pitch, 500VAC voltage withstand, and 1000000000 ohm insulation resistance. Ideal for board mounting applications requiring a durable, polarized housing with right-angle socket style connectors.
746-010-520-606
Edac
Edac 746-010-520-606 is a 2-row card edge connector with 10 contacts. It has a mating contact pitch of 0.125", insulation resistance of 5Gohm, and dielectric voltage of 1500VAC. Ideal for PCB applications requiring high current signal transmission in temperatures ranging from -40 to 105°C.
ASP-134488-01
Samtec
Samtec ASP-134488-01 is a 10-row, 400-contact board connector with 0.05" pitch and liquid crystal polymer insulator. It features gold over nickel mating contacts, straight mounting style, and surface mount termination. Ideal for commercial applications requiring high-density connections on PCBs.
M80-5401042
Harwin Plc
M80-5401042 by Harwin PLC is a 10-contact board connector with 0.079" mating contact pitch, suitable for PCB mounting with a temperature range of -55 to 125°C. Featuring tin finish contacts and glass-filled polyphenylene sulfide insulator, it offers high durability with 500 cycles and UL94V-0 flammability rating. Ideal for commercial applications requiring reliable right-angle mounting in black color housing.
22-14-2104
The Molex 22-14-2104 is a board connector with 10 contacts, rated at 2.5A signal current and featuring a mating contact pitch of 0.1". With a body length of 0.996", it is designed for PCB edge locking hook mounting applications, offering durability of 25 cycles and insulation resistance of 500000000000 ohm.
280371-2
TE Connectivity 280371-2 is a BOARD CONNECTOR with 4 contacts, 0.1" pitch, and POLYETHYLENE insulator. It has a temperature range of -65 to 105°C and features BRASS contacts with Tin finish. Ideal for commercial applications requiring reliable connections in electrical systems.
5-826629-0
TE Connectivity 5-826629-0 is a BOARD CONNECTOR with 50 contacts, rated at 5A. Featuring a mating contact pitch of 0.1", it has an insulation resistance of 5000000000 ohm and operates b/w -65 to 105 °C. Ideal for commercial applications, this connector offers durability up to 150 cycles and uses SOLDER termination.
22-28-4023
The Molex 22-28-4023 is a board connector with 0.1" pitch, suitable for commercial applications. Featuring a dielectric voltage of 1500VAC and insulation resistance of 1Gohm, it offers reliable signal transmission at up to 4A current. With a durable design rated for 25 cycles, this male connector has a solder termination type and matte tin finish over nickel for optimal performance.
SM02B-PASS-TBT(LF)(SN)
SM02B-PASS-TBT(LF)(SN) by J S T Mfg is a board connector with 0.079" mating contact pitch, 800VAC dielectric voltage, and 3A signal current rating. Ideal for applications requiring a male right-angle surface mount connector with tin finish, such as PCB connections in electronics assemblies.
B5P-VH(LF)(SN)
B5P-VH(LF)(SN) by J S T Mfg is a 5-contact BOARD CONNECTOR with 0.156" pitch, 1500VAC dielectric voltage, and 10A signal current. It features POLYAMIDE66 insulation, BRASS contacts with Tin finish, and operates b/w -25 to 85 °C. Ideal for PCB applications requiring high insulation resistance and UL94V-0 flammability rating.
22-16-2070
The Molex 22-16-2070 is a board connector with 7 contacts, rated at 2.5A signal current. Featuring a mating contact pitch of 0.1", it has an insulation resistance of 500000000000 ohm and operates b/w -40 to 105 °C. Ideal for PCB edge locking hook mounting in commercial applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
90142-0010
The Molex 90142-0010 is a board connector with a mating contact pitch of 0.1 inch and insulation resistance of 1000000000 ohm. It has a body width of 0.304 inch and is commonly used in cable mounting applications.
90148-1204
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 350VAC; No. of Connectors: ONE;
90142-0016
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; No. of Connectors: ONE;
90142-0008
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Body Depth: .6 inch;
90142-0012
Molex 90142-0012 is a 12-contact board connector with 0.1" pitch, suitable for commercial applications. Featuring POLYPHENYLENE OXIDE insulator and 1000VAC dielectric voltage, it operates b/w -55 to 105 °C. With a current rating of 3A, this female connector has a crimp termination and black color housing.
90142-0006
Molex 90142-0006 is a 2-row board connector with 0.1" contact pitch, rated for 3A signal current. It features POLYPHENYLENE OXIDE insulation, operates b/w -55 to 105°C, and has a dielectric strength of 1000VAC. Ideal for commercial applications requiring reliable female connectors with crimp termination in black color.
90142-0018
Molex 90142-0018 is a 2-row board connector with 18 contacts, 0.1" pitch, and 3A signal rating. It features POLYPHENYLENE OXIDE insulation, operates b/w -55 to 105°C, and has a dielectric strength of 1000VAC. Ideal for commercial applications requiring reliable female connectors with crimp termination in black color.
90142-0040
90142-0014
Molex 90142-0014 is a 14-contact board connector with 0.1" pitch, suitable for commercial applications. It features a 1000000000 ohm insulation resistance, operates b/w -55 to 105 °C, and has a dielectric strength of 1000VAC. Ideal for cable mounting with female contacts in polarized housing.
90142-0020
Molex 90142-0020 is a 20-contact board connector with 0.1" pitch, suitable for cable mounting. It features a dielectric voltage of 1000VAC and insulation resistance of 1 Gohm. Ideal for commercial applications requiring a polarized housing and female SQ pin-skt contacts.
90148-1103
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mixed Contacts: NO; No. of Rows Loaded: 1; Mating Contact Finish: NOT SPECIFIED;
90142-0024
90147-1103
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; No. of Connectors: ONE;
90147-1220
90142-0034
Molex 90142-0034 is a 2-row board connector with 34 contacts, rated at 3A signal current. Featuring a mating contact pitch of 0.1", it has an insulation resistance of 1Gohm and operates b/w -55°C to 105°C. Ideal for commercial applications requiring a polarized housing and crimp termination on cables.
90142-0026
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Rows Loaded: 2; Mixed Contacts: NO;
90143-0008
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VDC; Contact Resistance: 20 mohm;
90148-1207
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Terminal Pitch (mm): 2.54; Contact Material: NOT SPECIFIED; Termination Type: SOLDER;
90143-0004
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VDC; Maximum Operating Temperature (Cel): 105;
90148-1110
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved