Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 90142-0016 is a 16-contact board connector with 0.1" pitch, suitable for commercial applications. It features a dielectric voltage of 1000VAC, insulation resistance of 1Gohm, and operates b/w -55°C to 105°C. Ideal for cable mounting with crimp termination and polarized housing for secure connections.
Median Price
$1.015
Lifecycle Status
Suppliers In-Stock
42
In-Stock Inventory
1k+
Bürklin Elektronik
1+ parts
$0.250
100+ parts
-
1k+ parts
10k+ parts
Arrow
$0.661
$0.585
$0.530
Heilind Electronics
$0.770
$0.628
$0.618
Interstate Connecting
$1.020
$0.761
$0.738
Distrelec
$1.037
$0.852
$0.786
Element14
$1.237
$0.879
$0.812
Mouser Electronics
$1.290
$0.933
$0.793
$0.744
Newark
$1.360
$0.981
$0.833
RS Americas
$1.420
$1.130
$1.000
DigiKey
$1.580
$1.113
$0.762
Farnell
$1.712
$1.168
$0.836
Adafruit Industries
$9.214
$8.754
Chip1Stop
$1.010
NEP Electronics
$0.743
Verical
$0.485
$0.347
TTI Europe
$0.622
$0.513
$0.456
Master Electronics
$0.903
$0.777
$0.724
Powell Electronics
$0.730
$0.570
RS (Exports)
$1.313
$1.261
$0.999
TTI
$0.660
PSC Electronics
Digiode
$0.238
DF Sales Co.
$0.741
Nova Conductors
FDH Electronics
$0.837
$0.673
$0.608
TME
$1.250
$0.801
$0.567
$0.492
IBS Electronics
$0.856
$0.813
$0.645
Vyrian
Electro Sonic
$0.886
$0.728
$0.699
VNN
Bristol Electronics
Elcom Components
LIBRA Elektronik GmbH
Speed Components Ltd
NexGen Digital
ACDS - Activité Composants Distribution Service
Holdelec - ElecDif-Pro
NAC Semi
Cyclops Electronics Ltd
Prism Electronics
Bisco
Semicontronic
$0.212
$0.207
$0.206
Corphita
$0.225
Argo Parts USA
$0.722
Continental Prestige Electronics
$1.380
$0.849
$0.672
Andel Nordic
$2.162
$2.075
Advanced Electronics
Aztec Data Supply Inc.
$9.503
Modulus Dynamics
$10.055
Assy Fe
Perfect Parts
Kepictronics
EMSNET (Excess)
Authorized Procurement Solutions
Glotronic Ltd.
ErreBi Group
Infinite Electronics LLP (Excess)
Close contact pitch allows for high density connections, making it suitable for compact electronic devices.
Optimal size for various applications without taking up too much space.
High insulation resistance ensures reliable and stable connections.
Can withstand high voltages, providing safety and reliability in electrical applications.
Can handle high temperatures, ideal for industrial environments.
Suitable for use in extreme cold conditions as well.
Meets safety standards for flammability, ensuring protection against fire hazards.
Able to carry strong currents for signal transmission.
Neutral color that blends well with various electronic devices.
Sufficient number of contacts for multiple connections.
Headers & Edge Type Connectors 90142-0016 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Color:
Insulator Material:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Contact Row Spacing (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Type:
No. of Connectors:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
90142-0016 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
LM555CN
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
1N4148WS
Synsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
BAV99
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317D2TG
Onsemi
LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
2N2222A
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M39029/58360
Souriau
CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; Tool Settings: M22520/2-09; Terminal Type: CRIMP; MIL Conformity: YES; Mating Contacts: M39029/56348;
Bytesonic Electronics
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
SS14
Jinan Jingheng Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
RN41N-I/RM
Microchip Technology
Microchip Technology's RN41N-I/RM is a telecom IC with 35 terminals, operating from -40 to 85°C. It has a supply voltage of 3.3V and is surface mountable in industrial applications. The package style is rectangular, measuring 13.2mm x 20.1mm with a seated height of 2.2mm, suitable for telecom interface functions.
ISO1050DUBR
Texas Instruments
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
Meritek Electronics
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
Surge Components
3606
Aw Industries
CARD EDGE CONNECTOR; Contact Gender: FEMALE; Mixed Contacts: NO; Filter Feature: NO; Mounting Type: BOARD; Manufacturer Series: 3606;
1-104257-1
TE Connectivity
TE Connectivity 1-104257-1 is a board connector with 12 contacts, 0.1" pitch, and 600VAC dielectric voltage. Ideal for commercial applications, it has a temperature range of -65 to 105°C and insulation resistance of 5G ohm.
MTSW-102-07-G-S-240
Samtec
Samtec's MTSW-102-07-G-S-240 is a board stacking connector with 0.1" pitch, gold-plated contacts, and glass-filled polyester insulator. Ideal for commercial applications, it features 2.54mm terminal pitch, solder termination, and male contact gender for reliable PCB connections.
5055960401
Molex
BOARD CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
70543-0007
Molex 70543-0007 is a board connector with 0.1" pitch, suitable for applications requiring 3A signal current. Featuring matte tin over nickel finish, it offers high durability with 50 cycles and operates b/w -40°C to 105°C. Ideal for commercial use, this connector has UL94V-0 flammability rating and glass-filled polyester insulation material.
22-11-2122
Molex 22-11-2122 is a board connector with 12 contacts, 0.1" pitch, and 4A signal current rating. Ideal for commercial applications, it features POLYAMIDE insulation, BRASS contacts with Tin finish, and operates b/w 0-75°C temperature range.
3-5353652-6
TE Connectivity 3-5353652-6 is a board stacking connector with 220+220 contacts, 0.019" mating pitch, and 200VAC dielectric voltage. Ideal for commercial applications, it features POLYETHYLENE insulation, 0.5A signal current rating, and -40 to 85°C operating temperature range.
1-640456-6
TE Connectivity 1-640456-6 is a board connector with 16 contacts, 0.1" pitch, and 5A signal rating. It features tin finish, glass-filled polyester insulator, and operates b/w -55 to 105°C. Ideal for commercial applications requiring reliable male connectors on PCBs.
53398-0671
Molex 53398-0671 is a board connector with 0.049" pitch, 100000000 ohm insulation resistance, and 250VAC dielectric voltage. Ideal for commercial applications, it features a male blade pin-skt contact style and surface mount termination on a straight receptacle body for durability in PCB mounting.
120591-1
Tyco Electronics Amp
PCB CONNECTOR; Option: GENERAL PURPOSE; Contact Material: PHOSPHOR BRONZE; MIL Conformity: NO; Mating Contact Finish: NOT SPECIFIED; IEC Conformity: NO;
SSW-102-01-T-D
SSW-102-01-T-D by Samtec is a 2-row, 4-contact board connector with a mating contact pitch of 0.1". It features liquid crystal polymer insulator material and phosphor bronze contact material. Ideal for commercial applications requiring a reliable, straight-mount socket connection on PCBs.
DF13-20DS-1.25C
DF13-20DS-1.25C by Hirose Electric is a 20-contact board connector with 0.049" pitch, suitable for commercial applications. Featuring POLYAMIDE insulation, it has a 500VAC dielectric voltage rating and operates b/w -35 to 85°C. With FEMALE contacts and CRIMP termination, it offers durability of 30 cycles in a LOCKING cable mounting setup.
FTSH-105-01-L-DV-K-P
Samtec's FTSH-105-01-L-DV-K-P is a 2-row, 10-contact board connector with a mating contact pitch of 0.05". It features TIN over NICKEL termination finish and operates b/w -55°C to 125°C. Ideal for commercial applications requiring reliable connections on PCBs with a rectangular contact pattern.
52271-0469
Molex 52271-0469 FFC/FPC connector with 0.039" pitch, 0.118" body width, and TIN finish is ideal for board mounting applications. Features include polyamide insulator, phosphor bronze contacts, and UL94V-0 flammability rating. Suitable for surface mount termination in commercial settings.
B6BZR(LF)(SN)
J S T Mfg
B6BZR(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.059" mating contact pitch, 500VAC dielectric voltage, and 1A signal current rating. It is used in commercial applications, featuring GLASS FILLED POLYAMIDE insulation material and BRASS contact material for reliability.
78646-3001
The Molex 78646-3001 is a PCB connector with a body length of 0.514 inch, body width of 0.057 inch, and body depth of 0.608 inch. It is commonly used in commercial applications due to its durability, withstanding voltage of 500VAC, and insulation resistance of 1000000000 ohm.
22-14-2064
The Molex 22-14-2064 board connector features a mating contact pitch of 0.1", insulation resistance of 500000000000 ohm, and dielectric voltage rating of 250VAC. Ideal for PCB edge locking hook mounting, this female plug connector has a total of 6 contacts and is rated for signal currents up to 2.5A in commercial applications.
SSW-106-01-T-D
Samtec SSW-106-01-T-D is a 2-row, 12-contact board connector with a mating contact pitch of 0.1". It features liquid crystal polymer insulator material and matte tin finish over nickel. Ideal for PCB applications requiring reliable female socket connectors with solder termination in commercial settings.
1-1658622-1
TE Connectivity 1-1658622-1 is a dual-row board connector with 60 contacts, rated at 1A signal current. Featuring a mating contact pitch of 0.1", it uses polyethylene insulation and operates b/w -65 to 105°C. Ideal for ribbon cable applications, it offers durability up to 150 cycles and polarization key for secure connections.
TCMD-12-01
Samtec's TCMD-12-01 is a 24-contact, 2-row board connector with terminal pitch of 2mm. It supports IDC/solder termination and male contact gender. Ideal for applications requiring straight mounting on both boards and cables.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
90142-0010
The Molex 90142-0010 is a board connector with a mating contact pitch of 0.1 inch and insulation resistance of 1000000000 ohm. It has a body width of 0.304 inch and is commonly used in cable mounting applications.
90148-1204
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 350VAC; No. of Connectors: ONE;
90142-0008
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Body Depth: .6 inch;
90142-0012
Molex 90142-0012 is a 12-contact board connector with 0.1" pitch, suitable for commercial applications. Featuring POLYPHENYLENE OXIDE insulator and 1000VAC dielectric voltage, it operates b/w -55 to 105 °C. With a current rating of 3A, this female connector has a crimp termination and black color housing.
90142-0006
Molex 90142-0006 is a 2-row board connector with 0.1" contact pitch, rated for 3A signal current. It features POLYPHENYLENE OXIDE insulation, operates b/w -55 to 105°C, and has a dielectric strength of 1000VAC. Ideal for commercial applications requiring reliable female connectors with crimp termination in black color.
90142-0018
Molex 90142-0018 is a 2-row board connector with 18 contacts, 0.1" pitch, and 3A signal rating. It features POLYPHENYLENE OXIDE insulation, operates b/w -55 to 105°C, and has a dielectric strength of 1000VAC. Ideal for commercial applications requiring reliable female connectors with crimp termination in black color.
90142-0040
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; No. of Connectors: ONE;
90142-0014
Molex 90142-0014 is a 14-contact board connector with 0.1" pitch, suitable for commercial applications. It features a 1000000000 ohm insulation resistance, operates b/w -55 to 105 °C, and has a dielectric strength of 1000VAC. Ideal for cable mounting with female contacts in polarized housing.
90142-0020
Molex 90142-0020 is a 20-contact board connector with 0.1" pitch, suitable for cable mounting. It features a dielectric voltage of 1000VAC and insulation resistance of 1 Gohm. Ideal for commercial applications requiring a polarized housing and female SQ pin-skt contacts.
90148-1104
Molex 90148-1104 header connector has 0.1" pitch, 350VAC voltage withstand, and 3A signal current rating. Ideal for board connections in commercial applications with UL and CSA standards compliance.
90148-1103
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mixed Contacts: NO; No. of Rows Loaded: 1; Mating Contact Finish: NOT SPECIFIED;
90142-0024
90147-1103
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; No. of Connectors: ONE;
90147-1220
90142-0034
Molex 90142-0034 is a 2-row board connector with 34 contacts, rated at 3A signal current. Featuring a mating contact pitch of 0.1", it has an insulation resistance of 1Gohm and operates b/w -55°C to 105°C. Ideal for commercial applications requiring a polarized housing and crimp termination on cables.
90142-0026
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Rows Loaded: 2; Mixed Contacts: NO;
90143-0008
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VDC; Contact Resistance: 20 mohm;
90148-1207
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Terminal Pitch (mm): 2.54; Contact Material: NOT SPECIFIED; Termination Type: SOLDER;
90143-0004
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VDC; Maximum Operating Temperature (Cel): 105;
90142-0036
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Reference Standard: UL; Polarization Key: POLARIZED HOUSING;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved