Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 87437-1043 is a board connector with 10 contacts, 0.059" pitch, and 700VAC voltage rating. Ideal for commercial applications, it features matte tin over nickel finish, glass-filled polyamide insulator, and operates b/w -55 to 105°C.
Median Price
$0.550
Lifecycle Status
Suppliers In-Stock
26
In-Stock Inventory
1k+
Master Electronics
1+ parts
100+ parts
-
1k+ parts
$0.500
10k+ parts
$0.494
Mouser Electronics
$0.900
$0.650
$0.558
$0.534
DigiKey
$0.920
$0.635
Element14
$1.260
$1.020
$0.827
Adafruit Industries
$10.881
$10.337
Chip1Stop
$0.468
TTI
$0.404
Newark
$0.583
Farnell
$0.371
Verical
$0.540
$0.530
Avnet
$0.487
Arrow
$0.374
Powell Electronics
Distrelec
Nova Conductors
$0.467
TestEquity
Digiode
$0.608
Component Electronics Inc.
$0.770
$0.580
Vyrian
IBS Electronics
Rutronik
$0.543
$0.514
Speed Components Ltd
VNN
Bristol Electronics
ComSIT Distribution GmbH
ComSIT USA
Semicontronic
$0.315
$0.307
$0.306
Aranea Global
$0.457
$0.439
Continental Prestige Electronics
Argo Parts USA
$0.453
Corphita
$0.576
Aztec Data Supply Inc.
$7.381
Andel Nordic
$9.462
$9.083
Advanced Electronics
Kepictronics
Metaverse IC Inc.
Authorized Procurement Solutions
GreenTree Electronics
Assy Fe
Perfect Parts
The close proximity of mating contacts allows for a secure and reliable connection.
The appropriate length of the body ensures compatibility with standard board sizes.
High insulation resistance ensures minimal signal interference and reliable performance.
The high dielectric voltage withstand capability ensures safety and reliability in electrical applications.
The finish provides excellent conductivity and corrosion resistance for long-lasting performance.
The high operating temperature range makes this product suitable for a wide range of environments.
The low minimum operating temperature ensures functionality in extreme cold conditions.
The thick plating ensures durability and resistance to wear and tear.
The UL 94V-0 flammability rating indicates high fire resistance for safety.
The high rated current ensures compatibility with a wide range of signal applications.
The neutral color of the insulator blends well with various board designs.
Headers & Edge Type Connectors 87437-1043 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
87437-1043 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
PCN Packaging - 08743yyy3 Package 23/Jan/2017
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
BAV99
Zetex Plc
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
SPC TECHNOLOGY/ MULTICOMP
2N2222A
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
SMBJ18CA
Jiangsu Jiejie Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
ULN2803ADWRG4
Texas Instruments
ULN2803ADWRG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output, and built-in transient protection. It operates b/w -40 to 85 °C with a max supply voltage of 3 V. Ideal for applications requiring sink current flow direction in a small outline package style.
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
2N7002
Dc Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Terminal Form: GULL WING;
BSS138
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
LM317T
Fairchild Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
Synsemi
Bytesonic Electronics
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
FDV303N
Onsemi
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
M39029/56351
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.
502351-0800
Molex
The Molex 502351-0800 is a board connector with mating contact pitch of 0.079", insulation resistance of 1Gohm, and operating temperature range from -40 to 105°C. It is used in commercial applications requiring an 8-contact male receptacle with crimp termination for cable mounting.
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
51281-0594
Molex 51281-0594 FFC/FPC connector with 0.020" pitch, 5 contacts, and glass-filled LCP insulator. Ideal for board mounting in commercial applications. Operating temp -20 to 85°C, UL94V-0 rated, female contact type with surface mount termination.
5103308-1
TE Connectivity
TE Connectivity's 5103308-1 is a male board connector with 10 contacts, rated at 1A. It features a mating contact pitch of 0.1", insulation resistance of 5G ohm, and operates b/w -65 to 105°C. Ideal for commercial applications requiring reliable signal connections on PCBs.
22-55-2201
The Molex 22-55-2201 is a board connector with 20 contacts, 0.1" pitch, and 0.999" body length. It is used in commercial applications with -40 to 120°C operating temperature range for cable mounting via crimp termination.
2-640456-2
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: COPPER ALLOY; IEC Conformity: NO; Mixed Contacts: NO;
DF11-4DS-2C
Hirose Electric
The Hirose Electric DF11-4DS-2C is a 2-row board connector with 4 contacts, featuring a mating contact pitch of 0.079", insulation resistance of 1Gohm, and dielectric voltage withstand of 650VAC. Ideal for applications requiring a durable socket-style connector with crimp termination, suitable for commercial use in environments ranging from -30 to 85°C.
5-146280-2
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Terminal Pitch (mm): 2.54; MIL Conformity: NO; DIN Conformance: NO;
DF13-4S-1.25C
DF13-4S-1.25C by Hirose Electric is a 4-contact board connector with 0.049" pitch, rated for 1A signal current. Featuring polyamide insulation and UL94V-0 flammability, it operates b/w -35°C to 85°C. Ideal for commercial applications requiring durable crimp termination in cable mounting setups.
M80-8530842
Harwin Plc
The Harwin PLC M80-8530842 is a 8-contact male plug board connector with 0.079" mating contact pitch and 3A signal current rating. Featuring POLYAMIDE insulation, it operates b/w -55°C to 125°C, suitable for commercial applications requiring durability up to 500 cycles.
22-01-3077
The Molex 22-01-3077 is a board connector with 0.1" mating contact pitch, suitable for headers & edge type connectors. Featuring a 700VAC dielectric voltage and -40 to 105°C operating temperature range, it offers reliable signal current of 4A. With POLYAMIDE insulation material and UL94V-0 flammability rating, this connector is ideal for commercial applications requiring durable and polarized female contacts.
851-43-025-10-001000
Mill-max Mfg
The Mill-max Mfg 851-43-025-10-001000 is a board connector with a total of 25 contacts and a terminal pitch of 1.27mm. It features a matte tin over nickel contact finish and is commonly used in applications requiring female socket connectors on circuit boards.
51021-1000
The Molex 51021-1000 is a board connector with 10 contacts, 0.049" pitch, and 0.561" body length. It has an insulation resistance of 100M ohm and operates b/w -40°C to 85°C. Ideal for commercial applications requiring a female crimp termination in a locking receptacle design.
52207-1833
The Molex 52207-1833 FFC/FPC connector has a mating contact pitch of 0.039", insulation resistance of 100M ohm, and dielectric voltage rating of 250VAC. It is used in board mounting applications for signal currents up to 1A, with a durability of 30 cycles.
TSW-104-07-T-S
Samtec
Samtec TSW-104-07-T-S is a 4-contact board connector with 0.1" pitch, suitable for commercial applications. It features phosphor bronze contacts with matte tin finish and operates b/w -55°C to 105°C. The connector has a black insulator made of polybutylene terephthalate, UL94V-0 rated, and uses solder termination.
B2B-XH-A-GU
B2B-XH-A-GU by J S T Mfg is a BOARD CONNECTOR with 2 contacts, BRASS material, and TIN finish. It has a terminal pitch of 2.5mm and is used for BOARD mounting applications requiring male connectors with solder termination.
B5B-PH-SM4-TB(LF)(SN)
B5B-PH-SM4-TB(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, suitable for applications requiring 2A signal current. Features include POLYAMIDE66 insulator, 800VAC dielectric voltage, and TIN (Sn) finish over COPPER contacts. Ideal for PCB mounting with RECTANGULAR contact pattern and WHITE insulator color.
70107-0001
Molex 70107-0001 is a board connector with 0.1" pitch, ideal for cable mounting. Featuring polyester insulator material, it has 2 contacts and UL94V-0 flammability rating. This rectangular connector uses crimp termination and male SQ pin-skt contact style, suitable for various edge type applications.
78646-3001
The Molex 78646-3001 is a PCB connector with a body length of 0.514 inch, body width of 0.057 inch, and body depth of 0.608 inch. It is commonly used in commercial applications due to its durability, withstanding voltage of 500VAC, and insulation resistance of 1000000000 ohm.
114-00841-68
Amphenol Communications Solutions
Amphenol's 114-00841-68 PCB connector features a mating contact pitch of 0.043", liquid crystal polymer insulator, and right angle mounting style. With 8 contacts, it is ideal for board mounting applications in commercial settings.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
87438-0443
The Molex 87438-0443 is a board connector with 4 contacts, featuring a mating contact pitch of 0.059" and insulation resistance of 1G ohm. It has a body length of 0.287", operates b/w -55 to 105°C, and is ideal for commercial applications requiring a durable, polarized housing with matte tin finish.
87437-0373
The Molex 87437-0373 is a board connector with 0.059" mating contact pitch, 1000000000 ohm insulation resistance, and 700VAC dielectric voltage. Ideal for commercial applications, it features a polarized housing, surface mount termination, and can handle temperatures from -55 to 105 °C.
87438-0243
Molex 87438-0243 is a board connector with 0.059" pitch, suitable for commercial applications. Features include 700VAC dielectric voltage, -55 to 105°C operating temp range, and matte tin over nickel finish. Ideal for use in PCBs requiring durable male connectors with 2.5A signal current rating.
87438-0343
Molex 87438-0343 is a board connector with 0.059" pitch, 700VAC voltage withstand, and 1000000000 ohm insulation resistance. Ideal for commercial applications requiring a durable male plug with surface mount termination and right-angle mounting.
87438-1043
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 700VAC; No. of Connectors: ONE;
87437-0443
Molex 87437-0443 is a board connector with 0.059" pitch, 700VAC voltage withstand, and 1000000000 ohm insulation resistance. Ideal for commercial applications requiring a durable male plug with surface mount termination and polarized housing.
87439-0200
The Molex 87439-0200 is a board connector with a mating contact pitch of 0.059". It has a compact body size, measuring 0.161" in length, 0.132" in width, and 0.224" in depth. This female receptacle connector is commonly used for cable mounting applications due to its crimp termination type and locking mounting option.
87437-0343
87438-0643
The Molex 87438-0643 header connector has a mating contact pitch of 0.059", insulation resistance of 1Gohm, and dielectric voltage rating of 700VAC. Ideal for board connections in commercial applications with operating temperatures ranging from -55 to 105°C.
87438-0843
87437-0243
87437-0543
The Molex 87437-0543 is a board connector with 5 contacts, 0.059" pitch, and 700VAC voltage rating. Ideal for commercial applications, it features TIN over NICKEL finish, GLASS FILLED POLYAMIDE insulator, and operates b/w -55 to 105 °C temperatures.
87438-0743
The Molex 87438-0743 is a board connector with 0.059" pitch, suitable for commercial applications. Featuring matte tin over nickel finish, it has an insulation resistance of 1G ohm and can withstand up to 700VAC. With a rated current of 2.5A, this male connector offers durability of 10 cycles at temperatures ranging from -55 to 105°C.
87437-0643
87439-0400
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body Width: .132 inch; Reference Standard: UL;
87438-0543
87439-0900
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Option-1: LOCKING; Body Width: .132 inch;
87437-0273
The Molex 87437-0273 is a board connector with a mating contact pitch of 0.059", insulation resistance of 1Gohm, and dielectric voltage rating of 700VAC. It is used in applications requiring a male contact gender, surface mount termination type, and rectangular PCB contact pattern for commercial reliability.
87438-1443
87437-1052
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved