Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Contact Material: NOT SPECIFIED; Maximum Operating Temperature (Cel): 85; Minimum Operating Temperature: -20 Cel;
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Prism Electronics
Andel Nordic
$1.140
$0.796
Corphita
Perfect Parts
Telecom & Datacom Connectors 74320-4007 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Molex
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
Filter Feature:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
Mounting Option-1:
Mounting Option-2:
Mounting Style:
Mounting Type:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
PCB Contact Pattern:
Rated Current - Signal:
Reference Standard:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
Minimum Withdrawal Force (N):
74320-4007 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
2N2222A
Electronic Transistors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM317T
STMicroelectronics
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
LM555CM
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148WS
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99-7-F
Multicomp Pro
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
USBLC6-2SC6
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
International Devices
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
LM555CN
Rochester Electronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
STM8S003F3P6TR
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
Semiconductor Technology
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
NXP Semiconductors
87520-0010ALF
Amphenol Communications Solutions
The Amphenol Communications Solutions 87520-0010ALF USB connector features a body length of 0.571", insulation resistance of 1G ohm, and dielectric voltage rating of 750VAC. Ideal for telecom applications, this right-angle receptacle has a solder termination type and is rated for 1500 cycles durability.
48258-0002
Molex
Molex 48258-0002 is a USB connector with gold termination, suitable for telecom/datacom applications. It features a body size of 0.571" x 0.272" x 0.551", glass-filled polyamide insulator, and phosphor bronze contacts. With UL 94V-0 flammability rating, it operates b/w -25°C to 85°C and supports up to 1.5A signal current.
UJ31-CH-G1-SMT-TR
Cui Devices
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 100VAC; No. of Connectors: ONE; Body Width: .135 inch;
FCN-365P008-AU
Fujitsu
FCN-365P008-AU by Fujitsu is a Telecom & Datacom Connector with 8 contacts, rated at 3A signal current. It features a mating contact pitch of 0.1", insulation resistance of 1Gohm, and operates b/w -55°C to 85°C. Ideal for commercial applications requiring reliable board mounting with solder termination.
614004135023
Wuerth Elektronik & Kg
614004135023 USB connector by Wurth Elektronik features gold termination, polybutylene terephthalate insulator, and copper alloy contacts. With a dielectric voltage of 750VAC, it is ideal for telecom & datacom applications requiring a durable, polarized housing with solderable retention clips. Operating b/w -40 to 105°C, this female receptacle offers reliable signal current of 1.5A and UL-rated flammability.
292303-1
TE Connectivity
TE Connectivity's 292303-1 USB connector has a body length of 0.576", insulation resistance of 1000000000 ohm, and operates b/w -55 to 85 °C. Ideal for telecom/datacom applications, it features solderable retention clips for board mounting and a shell made of copper alloy.
615008138321
615008138321 by Wurth Elektronik is a Telecom & Datacom Connector with 8 contacts, gold finish, and 500 cycles durability. It has a dielectric voltage of 1000VAC and insulation resistance of 500M ohm. Ideal for telecom and datacom applications with UL standard compliance.
65100516121
65100516121 USB connector by Wurth Elektronik features a body length of 0.378", insulation resistance of 1Gohm, and dielectric voltage rating of 750VAC. Ideal for telecom applications, this right-angle receptacle has a gold finish, liquid crystal polymer insulator, and operates b/w -40 to 105°C.
2-406549-1
TE Connectivity 2-406549-1 is a Telecom & Datacom Connector with EMI shielding, UL94V-0 rated. Features include insulation resistance of 500MΩ, operating temp range -40 to +85°C, and durability of 750 cycles. Ideal for telecom/datacom applications requiring reliable signal transmission in harsh environments.
5555164-1
TE Connectivity 5555164-1 is a Telecom & Datacom Connector with 0.608" body length, 0.5" width, and PBT-POLYESTER insulator. It has 500M ohm insulation resistance, operates b/w -40 to 85°C, and features a polarized housing for durability. Ideal for telecom and datacom applications requiring reliable signal connections.
1-1734028-1
TE Connectivity 1-1734028-1 is a Telecom & Datacom Connector with POLYETHYLENE insulator, LOCATING POST board mounting, and NICKEL shell finish. Ideal for telecom applications, it has 4 contacts, rated at 1.5A signal current, UL94V-0 flammability code, and can withstand temperatures from 0 to 50°C.
48037-2100
The Molex 48037-2100 USB connector has a body size of 0.472" x 0.177" x 0.74", with GLASS FILLED POLYAMIDE insulator. It operates b/w -20°C to 85°C, rated for 1.5A signal current, and features a NICKEL finish. Ideal for telecom/datacom applications, it offers durability of 200 cycles and mounts on boards/panels in RIGHT ANGLE configuration.
12401610E4#2A
AMPHENOL ICC
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; No. of PCB Rows: 2; Mounting Type: BOARD;
2174507-2
TE Connectivity's 2174507-2 USB Connector features Polyethylene insulator, Tin shell finish, and 29.52u plating thickness. Ideal for telecom/datacom applications with board mounting option, surface mount termination, and 1.8A signal current rating.
292304-3
TE Connectivity's 292304-3 USB connector features POLYETHYLENE insulator, 1000000000 ohm insulation resistance, and 0.435" body width. Ideal for telecom/datacom applications with 2 rows loaded, solderable retention clips, and rated current of 1A.
47491-0001
Molex 47491-0001 USB connector features gold termination, LCP insulator, and 1A signal current. Ideal for telecom/datacom applications with 5 contacts, right-angle mounting, and 10000 cycle durability. Operating temp range -40 to 85°C makes it suitable for commercial use.
6-554720-3
TE Connectivity 6-554720-3 is a POLYCARBONATE TELECOM & DATACOM CONNECTOR with 0.46"x.334"x.885" dimensions and 50u plating thickness. It has 8 contacts, POLARIZED HOUSING, UL standard, and is used for cable mounting with wire termination in telecom applications.
MRJ-5381-M1
Amphenol
Amphenol MRJ-5381-M1 is a Telecom & Datacom Connector with 8 contacts, rated at 1.5A signal current. It features gold over nickel mating contact finish, polyethylene insulator material, and staggered PCB contact pattern. Ideal for commercial applications requiring durable connectors with high insulation resistance and wide operating temperature range from -40 to 105°C.
897-43-004-90-000000
Mill-max Mfg
897-43-004-90-000000 by Mill-max Mfg is a USB connector with 0.474" body length, 1000000000 ohm insulation resistance, and 750VAC dielectric voltage. Ideal for telecom/datacom applications, it features matte tin over nickel termination finish and polyethylene insulator material.
555153-1
TE Connectivity's 555153-1 is a Telecom & Datacom Connector with 0.7" body length, 500M ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for telecom applications, it features POLYESTER insulator material, SPLIT BOARD LOCK mounting option, and operates b/w -40 to 85°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved