Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF BNC CONNECTOR; Reliability: COMMERCIAL; Termination Contact Finish: NOT APPLICABLE; Body or Shell Style: JACK; Cable Types: RG-179; Termination Type: CRIMP;
Median Price
$6.189
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Heilind Electronics
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Interstate Connecting
DF Sales Co.
$4.340
Digiode
$5.880
Vyrian
Andel Nordic
$2.694
$2.587
Corphita
$5.570
BNC Connectors 73171-1160 attributes and parameters. Explore more BNC Connectors devices from Molex
Body or Shell Style:
Cable Types:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Material:
Contact Style:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Reliability:
Sub-Category:
Termination Type:
Total No. of Contacts:
73171-1160 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
2N2222A
STMicroelectronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
STM32F405RGT6TR
STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
BAV99
Philips Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
MMBT2907ALT1G
Onsemi
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
2N7002
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;
1N4148WS
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H743IIT6
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
Diodes Incorporated
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
1N4148
Frontier Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Sinyork
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
BSS138
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
L78L05ABZ-AP
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
5226990-1
TE Connectivity
TE Connectivity's 5226990-1 BNC Connector features a body length of 0.581", insulation resistance of 5G ohm, and bayonet coupling type. Ideal for RF applications, this connector has a characteristic impedance of 50 ohm, operates up to 4 GHz frequency, and is designed for commercial reliability.
5227754-2
TE Connectivity's 5227754-2 BNC Connector features 50 ohm impedance, 4 GHz operating frequency, and bayonet coupling. Ideal for RF applications, it has a glass-filled polybutylene terephthalate insulator and zinc alloy shell with nickel finish.
M39012/20-0503
Kings Electronics
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Maximum Operating Frequency: 4 GHz; Insulator Material: POLYTETRAFLUOROETHYLENE; Additional Features: STANDARD: MIL-PRF-39012, INSERTION LOSS MAX AT 3GHZ;
M39012/16-0101
Defense Logistics Agency
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Poles: 1; Contact Style: COAX; DIN Conformance: NO;
R316.007.000
Radiall S A
Radiall S A's R316.007.000 is a BNC connector with 1.41 dB insertion loss, silver termination contact finish, and bayonet coupling type. It is suitable for RG 58, RG 141, RG 142, and RG 223 cables and has a max operating frequency of 2 GHz.
M39012/16-0014
Winchester Interconnect
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Voltage Standing Wave Ratio: 1.3; Shell Material: BRASS; Termination Type: CRIMP;
68175-1004
Amphenol
Amphenol 68175-1004 BNC Connector features 50 ohm impedance, 2 GHz frequency, and 1060VAC dielectric voltage. Ideal for RF applications with RG-62A/U cables, it offers durability of 500 cycles and operates b/w -65 to 165°C.
31-5329-52RFX
Amphenol 31-5329-52RFX is a BNC connector with 0.2 dB insertion loss, 1500VAC dielectric voltage, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, it features gold termination finish, bayonet coupling, and operates b/w -65°C to 165°C.
M39012/16-0102
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Voltage Standing Wave Ratio: 1.3; Mounting Type: CABLE; JESD-609 Code: e4;
112413
Amphenol 112413 is a BNC connector with gold termination, bayonet coupling, and polypropylene insulator. Ideal for RF applications, it features a 75 ohm impedance, solder termination, and female contact gender. Suitable for board and panel mounting in right angle configuration.
31-5329
Amphenol 31-5329 BNC Connector features 0.2 dB Insertion Loss, 2100VAC Dielectric Withstanding Voltage, and 50 ohm Characteristic Impedance. Ideal for RF applications up to 4 GHz with FEMALE contact gender and SOLDER termination in COMMERCIAL settings.
R141237000
R141237000 by Radiall S A is a BNC Connector with 0.13 dB Insertion Loss, 1.22 VSWR, and 50 ohm Impedance. It features Gold/Nickel termination for RF applications up to 4 GHz, ideal for cable mounting in high-frequency communication systems.
2-329456-1
TE Connectivity's 2-329456-1 BNC Connector features bayonet coupling, PTFE insulator, and brass shell. With a max operating temp of 85°C and impedance of 50 ohm, it is ideal for RF applications up to 4 GHz. Suitable for RG58 cables, this connector has a VSWR of 1.35 and is MIL conformant.
227161-2
TE Connectivity 227161-2 is a BNC Connector with body dimensions of 0.581" x 0.625" x 0.625". It has an insulation resistance of 5G ohm, operating temperature range from -55 to 85°C, and impedance of 50 ohm. Ideal for RF applications up to 4GHz, it features a bayonet coupling type and glass-filled polybutylene terephthalate insulator material.
31-238
Amphenol 31-238 BNC Connector with 0.2 dB insertion loss, 50 ohm impedance, and 4 GHz operating frequency. Ideal for RF applications requiring panel mount, bayonet coupling, and polytetrafluoroethylene insulator. Features nickel finish, brass shell material, and hermetic option for durability in commercial settings.
B6251C1-NT3G-50
Amphenol B6251C1-NT3G-50 is a RF BNC connector with gold over nickel finish, bayonet coupling, and female contact gender. It is used in board mounting applications requiring solder termination for high-quality signal transmission.
112533
Amphenol 112533 is a BNC connector with bayonet coupling, acetal insulator, and 50 ohm impedance. Ideal for RF applications, it features male contact gender, crimp termination, and straight cable mounting.
5413631-2
TE Connectivity's 5413631-2 BNC Connector features 50 ohm impedance, PTFE insulator, and zinc alloy shell. Ideal for RF applications with a max frequency of 4 GHz, this connector is durable with 500 cycles and operates b/w -55 to 85°C.
112596
Amphenol 112596 is a BNC connector with bayonet coupling, suitable for RF applications. Features include 50 ohm impedance, acetal insulator, and male contact gender. Ideal for cable mounting with crimp/solder termination in right angle plug style.
5227726-2
TE Connectivity's 5227726-2 BNC Connector is a bayonet coupling type, with a maximum operating temperature of 85°C and a minimum of -55°C. Its insulator material is glass-filled polybutylene terephthalate. This RF BNC connector has one port and a characteristic impedance of 50 ohm. It is suitable for general-purpose applications and can handle a maximum operating frequency of 4 GHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Molex
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved