Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 70553-0111 is a board connector with 0.1" pitch, suitable for commercial applications. Featuring 7 contacts, it has a 0.8"x.275"x.535" body made of glass-filled polycarbonate with TIN over nickel finish. Ideal for right-angle mounting on PCBs with solder termination and UL94V-0 flammability rating.
Median Price
$1.800
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Element14
1+ parts
$1.386
100+ parts
-
1k+ parts
10k+ parts
Farnell
$1.420
$1.030
$0.859
DigiKey
$2.550
Mouser Electronics
$2.940
$2.140
$1.890
$1.690
Verical
$1.531
Chip1Stop
$1.700
$1.540
$1.510
Powell Electronics
$1.670
Master Electronics
$2.190
$1.960
$1.720
Newark
$1.990
Digiode
$1.317
Nova Conductors
$1.410
VNN
Vyrian
IBS Electronics
$2.160
$2.034
TME
$1.950
$1.660
Semicontronic
$1.180
$1.150
$1.145
Corphita
$1.247
Continental Prestige Electronics
$1.381
Argo Parts USA
Netroflash
Aztec Data Supply Inc.
$3.454
Andel Nordic
$3.953
$3.795
Glotronic Ltd.
Perfect Parts
Close contact pitch allows for more compact and efficient design, maximizing PCB space.
Optimal length for secure connection while still maintaining a compact form factor.
Slim design allows for easy integration in tight spaces or densely populated PCBs.
Provides corrosion resistance and ensures a reliable electrical connection.
Durable material that can withstand various environmental conditions for long-lasting performance.
Sufficient plating thickness for enhanced conductivity and protection against wear and tear.
Meets stringent safety standards for flame retardancy, ensuring the product is suitable for a wide range of applications.
Classic black color for a sleek and professional appearance.
A sufficient number of contacts for various connections, making the product versatile.
Designed for easy installation on a PCB board.
Standard terminal pitch for compatibility with a wide range of components.
Enables flexible PCB layout and can accommodate space constraints.
Square pin socket contact style for secure and stable connections.
Designed for commercial use, ensuring consistent performance and durability.
Headers & Edge Type Connectors 70553-0111 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Style:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-2:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Option:
PCB Contact Pattern:
Plating Thickness (inch):
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
70553-0111 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
PCN Assembly/Origin - Mult Devs Supplier 02/Dec/2022
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
SMBJ18CA
Pulse Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
LL4148
Surge Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
National Semiconductor
1N4148
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
SS14
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
LM7805CT
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
MBRS1100T3G
Onsemi
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
First Components International
1N4148WT
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138BK,215
NXP Semiconductors
NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.
CRCW080510R0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
NDT2955
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;
SFW4S-2STE1LF
Amphenol Communications Solutions
The Amphenol SFW4S-2STE1LF is a 4-contact FFC/FPC connector with 0.039" pitch, tin finish, and UL94V-0 rating. It is designed for surface mount board applications, featuring female contacts in a straight mounting style. Ideal for compact electronic devices requiring reliable signal transmission.
BM03B-SRSS-TB(LF)(SN)
J S T Mfg
BM03B-SRSS-TB(LF)(SN) by J S T Mfg is a 3-contact BOARD CONNECTOR with 0.039" pitch, suitable for -25 to 85°C temp range. Featuring POLYAMIDE insulator, COPPER ALLOY contacts, and 100000000 ohm insulation resistance, it's ideal for PCB applications requiring 1A signal current.
DF11-16DS-2C(20)
Hirose Electric
BOARD CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
22-05-2081
Molex
Molex 22-05-2081 is a board connector with 8 contacts, featuring brass contact material and matte tin finish. With a mating pitch of 0.1", it offers high insulation resistance of 1000000000 ohm. Ideal for commercial applications, this connector has a durable design with UL flammability rating of 94V-0.
22-03-2021
Molex 22-03-2021 is a board connector with mating contact pitch of 0.1", insulation resistance of 50000000000 ohm, and dielectric voltage of 1500VAC. It has a male contact gender, rated current of 4A for signal transmission, and is suitable for commercial applications requiring durable connections on PCBs.
DF40C-90DS-0.4V(51)
DF40C-90DS-0.4V(51) by Hirose Electric is a 90-contact board stacking connector with gold termination, liquid crystal polymer insulator, and phosphor bronze contacts. It has a mating pitch of 0.016", withstands 100VAC, and operates b/w -35 to 85°C. Ideal for PCB applications requiring high durability and reliability in commercial settings.
47309-2651
Molex 47309-2651 is a PCB connector with 0.043" pitch, GOLD finish, and 100000000 ohm insulation resistance. Ideal for commercial applications, it has a durability of 10000 cycles and operates b/w -40 to 85 °C.
50-57-9002
The Molex 50-57-9002 is a board connector with a mating contact pitch of 0.1". Featuring glass-filled polyester insulator, it operates b/w -40 to 105°C. With female SQ pin-skt contacts, it is ideal for commercial applications requiring a reliable rectangular contact pattern.
B4B-XH-AM
B4B-XH-AM by J S T Mfg is a BOARD CONNECTOR with 4 contacts, BRASS material, and Tin (Sn) finish. It has a terminal pitch of 2.5mm and is UL 94V-0 rated. Ideal for board mounting applications requiring male connectors with solder termination.
1638190000
Weidmueller & Kg
1638190000 by Weidmueller & Kg is a BOARD CONNECTOR with 17 contacts, TIN finish, and UL 94V-0 flammability rating. It is used for CABLE mounting applications requiring FEMALE contact gender and SCREW termination in SOCKET style connectors.
61301011121
Wuerth Elektronik & Kg
61301011121 by Wurth Elektronik is a board connector with 10 contacts, rated at 3A signal current. Featuring gold over nickel termination finish, it has a mating contact pitch of 0.1", insulation resistance of 1Gohm, and operates b/w -40 to 125°C. Ideal for commercial applications requiring reliable connections on PCBs.
VHR-2N-BK
BOARD CONNECTOR;
FTSH-110-01-L-DV-K-A-P
Samtec
Samtec's FTSH-110-01-L-DV-K-A-P is a 2-row, 20-contact board connector with a contact pitch of 1.27mm. It features gold mating contacts over nickel, suitable for commercial applications with an operating temperature range from -55 to 125°C. The connector has a straight mounting style and uses liquid crystal polymer insulator material.
52207-1160
The Molex 52207-1160 is a FFC/FPC connector with 11 contacts, mating pitch of 0.039", and tin termination finish. It operates b/w -30 to 85°C, suitable for board mounting in applications requiring a right angle receptacle design.
51110-1050
Molex 51110-1050 is a 2-row board connector with 0.079" contact pitch, suitable for cable mounting. Featuring glass-filled polyester insulation, it has 10 contacts with 40 mohm resistance. Operating b/w -40°C to 105°C, it is UL-certified and polarized for commercial applications.
SM04B-PASS-TBT(LF)(SN)
SM04B-PASS-TBT(LF)(SN) by J S T Mfg is a 4-contact board connector with 0.079" pitch, 800VAC dielectric voltage, and 3A signal current rating. Ideal for PCB applications requiring surface mount termination, it features copper alloy contacts and polyamide insulation for reliable performance in temperatures ranging from -25 to 85°C.
XHP-11
XHP-11 by J S T Mfg is a BOARD CONNECTOR with 11 contacts, UL 94V-0 rated. It features FEMALE contacts for CABLE mounting with CRIMP termination. Ideal for applications requiring reliable edge type connectors in electronic assemblies.
51952-270LF
AMPHENOL ICC
BOARD CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
DF11-4DS-2C
The Hirose Electric DF11-4DS-2C is a 2-row board connector with 4 contacts, featuring a mating contact pitch of 0.079", insulation resistance of 1Gohm, and dielectric voltage withstand of 650VAC. Ideal for applications requiring a durable socket-style connector with crimp termination, suitable for commercial use in environments ranging from -30 to 85°C.
53398-0471
53398-0471 by Molex is a board connector with 0.049" mating contact pitch, 100M ohm insulation resistance, and 250VAC dielectric voltage. Ideal for applications requiring a male blade pin-skt contact style, this connector has a natural insulator color and operates b/w -40 to 85°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
70553-0001
Molex 70553-0001 is a board connector with 0.1" pitch, matte tin finish, and glass-filled polycarbonate insulator. Ideal for commercial applications, it features right-angle mounting and solder termination for reliable connections in electronic devices.
70553-0002
Molex 70553-0002 is a board connector with 0.1" pitch, suitable for commercial applications. Features include matte tin over nickel finish, glass-filled polyester insulator, and operating temperature range of -40 to 105°C. Ideal for right-angle mounting on PCBs with rectangular contact pattern.
70553-0003
Molex 70553-0003 is a board connector with 0.1" pitch, suitable for commercial applications. Features include tin finish, phosphor bronze contacts, and UL94V-0 rated insulator in black color. Ideal for PCB mounting with right angle style and solder termination.
70553-0005
Molex 70553-0005 is a board connector with 6 contacts, featuring a mating contact pitch of 0.1", matte tin finish, and glass-filled polyester insulator. It is used in applications requiring right-angle mounting on PCBs for reliable commercial connections.
70553-0004
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Body Depth: .535 inch;
70553-0036
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Contact Pattern: RECTANGULAR;
70553-0037
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mating Contact Finish: NOT SPECIFIED;
70553-0106
70555-0072
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 850VAC; No. of Connectors: ONE;
70553-0007
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mounting Type: BOARD;
70553-0042
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mounting Option-2: LOCKING;
70553-0040
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Insulator Color: BLACK;
70553-0046
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Termination Contact Finish: TIN OVER NICKEL;
70555-0003
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 600VAC; No. of Connectors: ONE;
70555-0005
The Molex 70555-0005 is a board connector with 0.1" pitch, 600VAC voltage withstand, and 3A signal current rating. Ideal for commercial applications, it features solder termination, black insulator color, and UL/CSA standards compliance. With a durable design and right-angle mounting style, this male connector offers reliable performance in various electronic systems.
70555-0040
70555-0081
70553-0110
70553-0108
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Total No. of Contacts: 4;
70553-0112
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved