Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CONNECTOR ACCESSORY;
Median Price
$0.139
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Arrow
1+ parts
$0.183
100+ parts
$0.095
1k+ parts
$0.069
10k+ parts
$0.049
DigiKey
$0.190
$0.080
$0.072
Verical
-
$0.046
Chip1Stop
$0.083
PSC Electronics
Nova Conductors
$0.082
Digiode
Vyrian
VNN
Corphita
$0.090
Andel Nordic
$5.419
$5.202
Perfect Parts
Continental Prestige Electronics
$0.068
Assy Fe
Kepictronics
Authorized Procurement Solutions
Resion (Excess)
Netroflash
$0.077
$0.076
Infinite Electronics LLP (Excess)
Assembly Products 560023-0548 attributes and parameters. Explore more Assembly Products devices from Molex
Connector Accessory Type:
PCN Obsolescence/ EOL - Mult Devs EOL/Obs 27/Sep/2023
PCN Other - Multiple Devices Shipping Location 20/Mar/2020
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
ULN2803A
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
2N2222A
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Sinyork
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
1N4148
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
International Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
USBLC6-2SC6
STMicroelectronics
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
BSS138BK,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;
MBR0520LT1G
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
International Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
SS14
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
LM2931Z-5.0RPG
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
FDLL4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358ADR
Texas Instruments
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
2006-402
Wago
TERMINAL BLOCK ACCESSORY; MIL Conformity: NO; Assembly Item Name: JUMPER BAR; IEC Conformity: NO; DIN Conformity: NO;
MHDTZK-9-K
Norcomp Interconnect Devices
MHDTZK-9-K by Norcomp is a BACKSHELL KIT with insulator material ABS and zinc alloy construction. It has UL approval, operating from -40°C to 120°C. Ideal for applications requiring secure mounting with 4-40 screws in assembly products.
SPH-004T-P0.5S
J S T Mfg
SPH-004T-P0.5S by J S T Mfg is a CRIMP terminal CONTACT with FEMALE gender and STRAIGHT mounting style. It features SQ PIN-SKT contact style made of BRASS, ideal for assembly products requiring reliable connections in various applications.
1-104480-3
TE Connectivity
TE Connectivity 1-104480-3 is a crimp terminal with a rated voltage of 300V and a max operating temperature of 105°C. It is commonly used in power and signal applications, with approvals from CSA and UL.
W2S-P012
TE Connectivity's W2S-P012 is a wedge item in the DT Series, designed for power and signal applications. With a temperature range of -55 to 125°C, it accommodates wires up to 0 AWG. Made of polybutylene terephthalate, it ensures reliable performance in various assembly projects.
1060-12-0166
TE Connectivity's 1060-12-0166 contact features crimp terminal type, stamped design, and copper alloy material. With a wire gauge of 12 AWG and rated current of 25 A, it is ideal for applications requiring male round pin-socket contacts in straight mounting style. Operating temperatures range from -55 to 125°C.
50058-8000
Molex
The Molex 50058-8000 is a female crimp contact with bellowed design, made of phosphor bronze. It has a finish thickness of 35 and supports wire sizes from 32 to 28 AWG. Ideal for use in applications requiring the 51021 housing with a min cable entry of 0.02 inch and max cable entry of 0.039 inch.
16-02-0097
SPH-002T-P0.5S
SPH-002T-P0.5S by J S T Mfg is a CRIMP terminal for PH SERIES HOUSING with 2A rated current, 20 mohm contact resistance, and 0.031-0.059 inch cable entry range. It is designed for SIGNAL applications with FEMALE SQ PIN-SKT contacts made of PHOSPHOR BRONZE material.
350689-1
Tyco Electronics Amp
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 19 A; Maximum Cable Entry: .1 inch; Design: POWER; Minimum Cable Entry: .04 inch;
02-09-1119
Molex 02-09-1119 CONTACT features CRIMP terminals for 22-18 AWG wires. FEMALE gender, BRASS material, and ROUND PIN-SOCKET design make it ideal for STRAIGHT mounting in Assembly Products. With a 0.24" terminal length and 20 finish thickness, it ensures secure connections in various applications.
1060-16-0622
TE Connectivity 1060-16-0622 is a CRIMP terminal with stamped contact design. It supports wire gauge from 20 AWG to 16 AWG, rated for 13A current. Ideal for applications requiring male gendered contacts and straight mounting style.
08-56-0110
Molex 08-56-0110 CONTACT features CRIMP terminals for 30-22 AWG wires. Made of BRASS, it has a 0.186" length and 0.062" cable entry. Ideal for STRAIGHT mounting in Assembly Products applications.
13663723
Aptiv
5212
Keystone Electronics
CONNECTOR ACCESSORY; Assembly Item Name: BATTERY CONTACT; IEC Conformity: NO; DIN Conformity: NO; MIL Conformity: NO; Material: STEEL;
RM16M23K
Esterline Technologies
CONNECTOR ACCESSORY; Rated Current: 13 A; Contact Style: ROUND PIN-SOCKET; Assembly Item Name: CONTACT; DIN Conformity: NO; Contact Gender: MALE;
33012-2001
The Molex 33012-2001 is a CRIMP terminal CONTACT for MX150 CONNECTOR, with operating temperatures from -40 to 105 °C. It supports wire sizes from 16 to 14 AWG, rated at 22A and 500V DC. The FEMALE contact has a resistance of 8 mohm, made of COPPER ALLOY for STRAIGHT mounting applications.
WP-4P
Amphenol
CONNECTOR ACCESSORY; Minimum Operating Temperature: -55 Cel; Usage: DTP SERIES; IEC Conformity: NO; DIN Conformity: NO; Assembly Item Name: WEDGE LOCK;
SDN-21T-P1.5
SDN-21T-P1.5 by J S T Mfg is a CRIMP terminal connector with approvals from CSA, TUV, and UL. It is designed for power and signal applications with a rated current of 7A, suitable for wire sizes ranging from 22 AWG to 18 AWG. This connector has a max operating temperature of 85°C and can handle up to 250V AC/DC.
02-08-1002
Molex 02-08-1002 is a CRIMP terminal with STRAIGHT contact design, made of BRASS. It operates b/w -55 to 105 °C and can handle up to 5000V AC. Ideal for SIGNAL applications, it accommodates wire sizes from 20 AWG to 14 AWG, featuring FEMALE gender and ROUND PIN-SOCKET style contacts.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
5600230448
Molex 5600230448 is a MINI50 unsealed single row receptacle with crimp terminal type. It has a rated current of 4A and rated DC voltage of 14V, suitable for power applications. Made of copper alloy, it features compression contact style and female contact gender, with cable entry ranging from 0.043" to 0.055".
5600850101
Molex 5600850101 is a CRIMP terminal with 3A rated current and 125V DC voltage. It is used in 502351 HOUSING for power and signal applications, featuring CHAIN contact design. Operating temperature ranges from -40 to 105 °C.
5600230421
The Molex 5600230421 is a MINI50 unsealed single row receptacle with crimp terminals. It has a rated current of 4A and can handle a max cable entry of 0.047 inch. This power contact, made of copper alloy, is designed for applications requiring compression-style connections at 14V DC voltage.
5600573
Phoenix Contact
560023-0423
CONNECTOR ACCESSORY; Contact Gender: FEMALE; Mounting Style: STRAIGHT; DIN Conformity: NO; Material: BRASS; Assembly Item Name: CONTACT;
560023-0424
CONNECTOR ACCESSORY; IEC Conformity: NO; Terminal Type: CRIMP; Material: BRASS; DIN Conformity: NO; Contact Style: SQ PIN-SKT;
5600230550
5600230444
5600230445
560023-0544
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved