Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 560020-0420 is a board connector with 4 contacts, 0.079" pitch, and 3A signal current rating. Ideal for commercial applications, it features a polyamide insulator, TIN contact finish, and operates b/w -40 to 105°C.
Median Price
$1.099
Lifecycle Status
Suppliers In-Stock
37
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$0.700
100+ parts
-
1k+ parts
10k+ parts
Farnell
$1.190
$0.845
$0.720
Chip1Stop
$1.320
RS Americas
$1.650
$1.240
$0.990
DigiKey
$1.780
$1.288
Mouser Electronics
$1.290
$0.965
$0.948
Element14
$2.042
$1.595
$1.334
Adafruit Industries
$2.275
$2.162
Verical
$1.128
Powell Electronics
$1.070
$0.830
NEP Electronics
Arrow
$0.986
Master Electronics
$0.704
$0.693
Newark
$0.322
TTI
$0.860
$0.800
Heilind Electronics
$0.821
Distrelec
Interstate Connecting
Maritex
$0.507
$0.246
$0.232
$0.202
Digiode
$0.888
Nova Conductors
$1.046
TME
$1.620
$0.940
$0.770
$0.730
ComSIT Distribution GmbH
ComSIT USA
Vyrian
Chip Stock
IBS Electronics
$1.269
$1.001
Bristol Electronics
Sensible Micro Corp
R&J Components
NAC Semi
$1.010
$0.929
NexGen Digital
Pegasus Components GmbH
Semi Source
Speed Components Ltd
VNN
Prism Electronics
Semicontronic
$0.570
$0.556
$0.553
Corphita
$0.842
Argo Parts USA
$1.020
Netroflash
$0.994
$0.973
Allen Electronics Distributors
$1.860
$1.490
Advanced Electronics
Andel Nordic
$2.711
$2.603
Aztec Data Supply Inc.
$6.517
EMSNET (Excess)
Infinite Electronics LLP (Excess)
GreenTree Electronics
Abacus Technologies
Glotronic Ltd.
Authorized Procurement Solutions
Kepictronics
Futuretech Components
Continental Prestige Electronics
$0.718
$0.675
Robosynatics
$8.731
$8.553
Lucentia Tech
Assy Fe
Eastek
Perfect Parts
The small contact pitch allows for a high density of connections, making this product suitable for applications where space is limited.
High insulation resistance ensures reliable performance and reduces the risk of electrical faults or short circuits.
The high dielectric voltage rating provides protection against voltage spikes and ensures safe operation in electrical systems.
Tin finish offers good conductivity and corrosion resistance, enhancing the durability and longevity of the connector.
The high operating temperature range allows for reliable performance in various environmental conditions.
Headers & Edge Type Connectors 560020-0420 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
Dielectric Withstanding Voltage (V):
Durability:
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
Mating Contact Pitch (inch):
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
PCB Contact Pattern:
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
560020-0420 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
PCN Assembly/Origin - Mult Devs Tool Duplication 05/Jun/2023
PCN Packaging - Mult Devs Packaging 16/Oct/2023
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
1N4148
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
2N2222A
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
1N4148WS
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/56-351
Glenair
CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;
M85049/85-08W02
CONNECTOR ACCESSORY; MIL Conformity: YES; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999; Shell Sizes: 08; DIN Conformity: NO;
BAV99WT1G
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
Vishay Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR; Transistor Application: SWITCHING;
MMBT2907ALT1G
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
BAV99
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Telefunken Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803ADW
Texas Instruments
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Hitano Enterprise
FH12-11S-1SH(55)
Hirose Electric
FH12-11S-1SH(55) by Hirose Electric is a FFC/FPC connector with 11 contacts, gold termination finish, and 0.039" mating contact pitch. It has a temperature range of -40 to 85°C and insulation resistance of 500M ohm. Ideal for board mounting applications requiring a durable, right-angle female connector with ZIF termination.
DTM06-12SA-E007
TE Connectivity
TE Connectivity's DTM06-12SA-E007 is a 2-row board connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V, it handles up to 7.5A signal current at -55 to 125°C. Ideal for cable mounting applications requiring a polarized, UL-rated connector with strain relief option.
09-65-2028
Molex
Molex 09-65-2028 is a board connector with 0.155" mating contact pitch, 1000000000 ohm insulation resistance, and 1500VAC dielectric voltage withstand. Ideal for commercial applications, this male connector features a straight mounting style and solder termination type for durability in temperatures ranging from -40 to 105 °C.
FTSH-105-01-F-DV-K-P-FR
Samtec
The Samtec FTSH-105-01-F-DV-K-P-FR is a 2-row, 10-contact male board connector with tin finish and nickel barrier. It has a terminal pitch of 1.27mm and UL flammability rating of 94V-0. Ideal for surface mount applications in electronics requiring high-density connections.
502
Keystone Electronics
PCB CONNECTOR; Option: GENERAL PURPOSE; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; DIN Conformance: NO; MIL Conformity: NO;
90814-0904
The Molex 90814-0904 header connector features a mating contact pitch of 0.05", insulation resistance of 1G ohm, and body width of 0.197". Ideal for board mounting with a max operating temperature of 105°C, it is commonly used in commercial applications requiring a rated current of 1.2A.
B8B-XH-A(LF)(SN)
J S T Mfg
B8B-XH-A(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 8 contacts, 0.098" pitch, and 1000VAC dielectric voltage. It features POLYAMIDE66 insulation, BRASS contact material, and operates b/w -25 to 85 °C. Ideal for applications requiring a male SQ PIN-SKT contact style with solder termination.
51021-0600
The Molex 51021-0600 is a board connector with 6 contacts, 0.049" pitch, and 353VAC voltage withstand. Ideal for commercial applications, it has a temperature range of -40 to 105°C and features crimp termination for durability in cable mounting setups.
746-016-520-606
Edac
Edac 746-016-520-606 is a 16-contact card edge connector with 0.125" pitch, suitable for PCB mounting. Featuring 3A signal current rating, it has a dielectric voltage of 1500VAC and operates b/w -40 to 105°C. Ideal for applications requiring high insulation resistance and UL94V-0 flammability compliance.
B2B-PH-SM4-TB(LF)(SN)
B2B-PH-SM4-TB(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, POLYAMIDE6T insulator, and -25 to 85°C operating range. It has 2 contacts for surface mount applications on PCBs.
2-640456-2
The TE Connectivity 2-640456-2 is a board connector with a mating contact pitch of 0.1", suitable for commercial applications. Featuring a max operating temperature of 105°C, it has 22 contacts and a rated current of 5A. With solder termination and UL94V-0 flammability rating, it offers reliable performance in various electronic systems.
53261-0371
Molex 53261-0371 is a board connector with 0.049" pitch, 100000000 ohm insulation resistance, and 250VAC dielectric voltage. Ideal for commercial applications, it features a male blade pin-skt contact style, right-angle mounting, and surface mount termination type.
B4B-XH-A
B4B-XH-A by J S T Mfg is a BOARD CONNECTOR with 4 contacts, featuring Tin (Sn) over Copper (Cu) finish. It has a terminal pitch of 2.5mm and is designed for straight board mounting applications. The connector's UL Flammability Code is 94V-0, making it suitable for various electronic devices requiring reliable male contact connections.
10067847-001RLF
Amphenol Communications Solutions
Amphenol's 10067847-001RLF is a PCB connector with 11 contacts, rated at 0.5A signal current. Featuring a mating contact pitch of 0.066", it offers high insulation resistance of 1Gohm and operates b/w -40°C to 105°C. Ideal for board mounting applications, this durable connector has a plating thickness of 50u and meets UL standards.
DT06-6S-CE05
The TE Connectivity DT06-6S-CE05 is a 2-row board connector with 6 contacts, rated for 13A signal current and 250V voltage. With a body length of 1.268", it features glass-filled polyamide insulation, operates b/w -55°C to 125°C, and has a durability of 100 cycles. Ideal for commercial applications requiring reliable connections in harsh environments.
723-2
Wago
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mixed Contacts: NO; Mounting Type: CABLE; Additional Features: MAX CONTACTS (SERIES)=6, MAX ROWS (SERIES)=1;
61300311121
Wuerth Elektronik & Kg
61300311121 by Wurth Elektronik is a board connector with 0.1" mating contact pitch, 3A signal current rating, and gold over nickel termination finish. It is used in commercial applications, featuring a temperature range of -40 to 125°C and UL reference standard compliance.
MTCB1X-106-XXXCS025
BOARD CONNECTOR;
1939115-1
TE Connectivity 1939115-1 is a PCB connector with 9 contacts, rated at 0.5A. It features liquid crystal polymer insulator, right angle mounting style, and surface mount termination type. Ideal for commercial applications requiring a male contact gender and rectangular PCB contact pattern.
39-53-2145
Molex 39-53-2145 FFC/FPC connector with 14 contacts, 0.049" pitch, and 0.915" body length. Ideal for PCB applications requiring a 1.25mm terminal pitch and staggered contact pattern. Features polyester insulator material, UL94V-0 flammability code, and solder termination for reliable commercial use.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
560020-0220
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 700VAC; No. of Connectors: ONE; Board Mounting Option: FITTING NAIL;
560020-0520
The Molex 560020-0520 is a board connector with a mating contact pitch of 0.079", insulation resistance of 1Gohm, and dielectric voltage rating of 700VAC. It is used in applications requiring a durable male connector with surface mount termination, suitable for commercial reliability standards.
560020-0320
Molex 560020-0320 is a board connector with 3A signal current, 30 cycles durability, and 700VAC dielectric voltage. It features a mating contact pitch of 0.079", suitable for applications requiring male connectors with surface mount termination and natural insulator color.
560020-0620
The Molex 560020-0620 is a board connector with a mating contact pitch of 0.079", insulation resistance of 1Gohm, and dielectric voltage rating of 700VAC. It is used in applications requiring a durable male connector with surface mount termination, suitable for commercial reliability standards.
560020-0820
The Molex 560020-0820 is a board connector with 8 contacts, 0.079" pitch, and 3A signal current rating. Ideal for commercial applications, it features a polarization key, surface mount termination, and durable design for 30 cycles of use at temperatures ranging from -40 to 105°C.
5600201520
BOARD CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
560020-0720
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 700VAC; No. of Connectors: ONE; Mating Contact Finish: NOT SPECIFIED;
560020-0200
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 700VAC; No. of Connectors: ONE; Mounting Style: STRAIGHT;
5600201220
BOARD CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
560020-0500
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 700VAC; No. of Connectors: ONE; Minimum Operating Temperature: -40 Cel;
5600200530
Molex 5600200530 is a board connector with 5 contacts, 3A signal current rating, and 30 durability cycles. It features a mating contact pitch of 0.079", insulation resistance of 1Gohm, and dielectric voltage withstand of 700VAC. Ideal for commercial applications requiring male connectors with surface mount termination at temperatures ranging from -40 to +125°C.
5600201320
BOARD CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
5600201020
BOARD CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
560020-0300
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 700VAC; No. of Connectors: ONE; Body Length: .496 inch;
560020-0400
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 700VAC; No. of Connectors: ONE; Body Length: .575 inch;
560020-0600
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 700VAC; No. of Connectors: ONE; Mounting Type: BOARD;
560020-0800
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 700VAC; No. of Connectors: ONE; Contact Resistance: 10 mohm;
5600200230
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 700VAC; No. of Connectors: ONE; Body Length: .429 inch;
5600200330
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 700VAC; No. of Connectors: ONE; Maximum Operating Temperature (Cel): 105;
5600200630
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 700VAC; No. of Connectors: ONE; Termination Contact Finish: TIN;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved